GENUINE Frigidaire 137032600 Thermal Limiter

My Frigidaire dryer FFLG3911QW1 decided it was not going to dry anymore. The drum would spin, but the burner would not light. After watching a few YouTube videos I decided to tackle this project on my own.Dryer was easy to come apart and once inside I found years of lint (some of it looked burnt!) There are a number of sensors to check. Use your multimeter to check for continuity. If this part is bad it will show OPEN (no continuity)Installed the new part.. closed up the dryer and BAM... works great!Total time for the job45min to disassemble, diagnose and clean the lint out60min to install, reassemble and test (had some trouble getting the door back on the dryer)If you can DIY this repair, you would save $200+

This part worked perfectly 😊

Once we got to it, it was simple to change. It saved us a repair bill!

Works as described. I figured since I was changing the dryer element I may as well change this also.

I started getting the dreaded error message E64 on my Frigidare Affinity Dryer. My dryer would still heat up but about half way through the cycle would quit. You could restart it and it would go halfway through the cycle and quit again. I googled the area and first found that it could be the heating coils but that didn't make much since as I didn't think it would heat up so effectively if that was the case. I did more research and found that it could be the thermostat and the heat safety part Frigidaire 3204267 Safety Thermostat for Dryer. My fiance has some electrical experience and replaced both parts fairly easily. It took him approximately 2 hours. He followed directions that were easily found. I highly recommend going this route first if you have a little bit of fix it skills. Costs a lot less than a service call. The coils aren't difficult to get at if it turns out to be the problem.

I bought this because I was getting the error code e64 on my Electrolux dryer but I don't know for sure if this was the problem because I replaced the heater coil assembly and another thermostat but I figured while I had it apart it would be better to replace all parts rather than putting It back together only to find out I hadn't fixed it. Anyways I ended up breaking one of the tabs that the wires attach to when taking the wires off the old one pictured. If I had not had the replacement part I would have been waiting for one of these to put it back together. I would recommend this along with the heater replacement just in case. It's worth the extra money spent IMHO. Easy fix overall. Pictures show the coils glowing on the back of the dryer after replacing this part and the heating coils.

I'm not sure if this part is genuine Frigidaire. It did not come in a typical Frigidaire packaging and the stamping on the part is inconsistent with similar Frigidaire parts.On the bright side, shipping only took one day, and the part works. My wife is happy the dryer is working again.I try to purchase genuine OEM parts. If a part is a knockoff it should be stated in the description.

Just came right on time was a perfect fit nice packaging and nice and sturdy product

Not much to say. This is the exact same original part as what was originally installed in my dryer. Works great.I will add a short comment - This specific part is actually a one time heat fuse. Once it blows, that's it, it needs to be replaced. This is unlike the other similar part next to it in my dryer which resets itself once it has a chance to cool down again. So,,, DO NOT TEST THIS DEVICE WITH HEAT (like a cigarette lighter or heat gun etc) to make sure it's working correctly as some posts on the internet tell you. If you do try to test this device with heat, you will end up needing to buy a new one. That's why I had to buy this replacement for the original one in my dryer.

Came in 2 days, was the right part and works great. dryer is drying cloths again