TAILONZ PNEUMATIC 25mm Bore 50mm Stroke Air Cylinder Double Action with Y Connector and 2Pcs 6mm Fitting MAL25x50

This item provides the exact control I needed to power my blow job machine. It makes for some mind boggling, toe curling "me time"

I bought this and the solenoid they make to open a hood scoop on my Jeep. I had to fabricate some brackets to make it all work. I'm very pleased at the quality and operation. If anything I have have to buy the 2" version, to.minimize the stroke as this is a 3" but that would be a fine tuning of what I built.

I have purchased 30+ of these cylinders. For the cost, this cylinder performs well, BUT the included fittings are wrong about 70% of the time. This seems idiotic to me. Others have mentioned this and included pictures, but I can add that if you contact customer service, they just tell you to use the included teflon (PTFE) tape, which is absolutely not the solution for straight threads like this. You can buy fully compatible fittings from the same company here (they are for tubing with a 6mm outer diameter, like the ones that come with the cylinder by default): https://a.co/d/bmttdsh It’s a female 5mm straight thread on the cylinder if you want to source something different, but keep in mind that the sealing surface needs to fit inside the counterbore around the ports on the cylinder or it won’t seal. Tailonz - if you’re listening, please either: 1. Make the counterbore around the ports larger 2. Mill a flat surface on the ends instead of a counterbore 3. Just stop sending the wrong fittings? You clearly have the right ones because sometimes they work and sometimes they don’t. This has been a problem for at least a year, and in the last batch I even got a cylinder that came with one good fitting and one bad fitting. Please fix this!

These are so great I ordered another one which came in one day!!! I also ordered the tubing kit which is also awesome. The tubing connectors are quick release and makes piping air super easy... I'm going to order a few more for my project since they are working so well!! and the price was very within my budget...

Dunno about the people who got leaky cylinders, mine was air tight 100%.. she twerked first pull. The threads on the two ports are tapped kinda funky as they’re not quite 1/8 npt, bpt or flare.. but you can take any one of those three and give em a little of the dope and tuff lawn tape and theyll twerk just fine, you just may have to put the twist on em pretty good.. you cant really run a thread chaser or tap unless you have a blind hole flat tap but no need, its aluminum. Itll seal..

Great

Didn’t come with fittings or knuckle. The holes for the fittings had bits in them and stripped. Tried to contact support but wasn’t easiest thing to do. Wasted my money on this.

Works. There is some contious leak in cylinder itself. Maybe oil will seal it better?

bestens

Bloody good for the price

Wenn man wenig erwartet erhält man noch weniger. Optisch gut, technisch naja

Ok

Leider fehlt ein Anschlußnippel. Bitte um Nachsendung.