Eastman 15 Inch WaterFlex Water Heater Connector, 1 Inch FIP x 1 Inch FIP, Stainless Steel Corrugated Water Heater Supply Line, 447515

Having come across an insane angle I needed to traverse, this was perfect. I'm using both SCH40 & SCH80 with this & it is perfect. Tightens down easily (there is just enough for the tip to spin while the shaft does not move) and not a drop leaking using both paste & tape on connections. Be SURE the gasket is in the unit and the gasket MUST be the one they provide, if it's not there, don't try and put anything but one matching the dimensions of what they provide, or ask for one from the company (lesson learned by me). It is tough to bend, but that turned out to be great since it reduces vibration during fluid flow and thus, puts considerably less stress on connections. Used one for a temporary straight through and, even with several millimeters of "jolt" as the pressure increases 80PSI for well loads, not a drop after over a month. Super light, easy to use and really does a great job if installed properly. I'll try and update with a photo later, let's give it a few months and check back in then :-)

Need when I had to add a filter to my water softener set up. Works great and good quality

Worked perfect for what I needed it for.

These flex hoses were easy to install and are still performing and leak free after a year outdoors in Florida.

Looked strong and a good fit for my job. Did not use in my final project. Would recommend.

item as described, quality material

worked as advertised. Rubber gaskets make a good seal if the nipple has a mating surface.

It had small pin holes in it.