JPUNG A1893 A1954 Screen Replacement Kit for iPad 6 (6th Gen) Digitizer Touch Glass 6th Generation 9.7 inch 2018 with Home Button Full Repair Tools Video Guide

Great replacement. Can't believe all the tools it came with. So much. A lot of tape also. I didn't even use any that wasn't pre-applied, so I have the whole roll for future repairs. I am extremely pleased. My expectations for such an inexpensive replacement were low, but they were blown out of the water. It's not an easy repair, since the Apple applied glue is so sticky, but with patience and maybe a little acetone, it comes off in the end.

Does the trick. Easy installing. Clear instructions. No issues

This replacement screen was a nightmare to install. Firstly, the printed directions were absolutely horrible. They were vague at best. I had to watch a video from a youtuber to get it installed properly. There was broken glass everywhere and the suction cup was absolutely useless. Also, the tools to separate the broken glass from the chassis did not work at all. I used a razor blade to separate the broken screen from the ipad. I made sure not to cut any cables as shown in the youtube video I watched, which was excellent by the way. Unfortunately, I lost home functionality mainly due to my inexperience as I broke the zif connector for the home button cable, but also because the printed directions didn't explain AT ALL which way the zif connector was hinged. Anyway, I could live with that if everything else worked fine. The adhesive tape does NOT hold. I didn't try the included glue because there were NO instructions on how to install it and I didn't want to risk getting glue everywhere. The worst part is this, there is a horizontal band across my ipad that no longer registers touch input. I included a video showing this. This is not acceptable! Do NOT buy this! You'd be better off paying a pro to replace a broken screen because at least you get a warranty for a couple of months!

Unfortunately screen came damaged. Seller refunded. Other then damaged the screen looked to be well made.

This is the third replacement screen I ordered within two months time - first was from another company and it had so many dead zones it was impossible to use the ipad, second was also a different company and wasn't the right size, so I finally ordered from JPUNG. Very glad I did - the JPUNG screen works perfectly without any dead zones. However, the adhesion isn't the best - there is one edge where the screen comes slightly above the rim of ipad edge and it won't stay down. JPUNG includes a roll of extra sticky super thin double-sided tape (in anticipation of this issue?) but we sadly did not tape down the edges and assumed the factory adhesion would be enough. Now that the screen is in place, we don't want to pull it up to adhere a 2" section of thin tape with the risk of cracking it and ordering a 4th screen. Other issue is I absolutely ordered a white screen, knowing it would take two days longer to arrive than the black screen, just so my ipad could look like the original. When it arrived as planned, it was the black screen, and the faulty dead-zone screen had just shattered while we took it off in anticipation of opening the JPUNG box. At that point, it had been 6 weeks of either not having a usable ipad, or having a dead-zone screen, and I was so frustrated that we installed the black anyway. So now I have a redneck-looking ipad with a black-edge screen and the original white home button (I wanted to keep the fingerprint touch). First world problems, I know. If this screen cracks, I'll absolutely buy a JPUNG again simply because there are no dead zones.

Installation of this product is super easy, the hard part is dissembling and removing the old screen. The tools included were somewhat helpful, but didn’t last long. I guess you get what you pay for. After installing this, I lost complete functionality of the original or new home button. The screen clarity is not the greatest. Touch screen works completely as it should. The adhesive is a joke and does nothing. If you just want to fix your screen for cheap and have it work, yes… this is a good option. If you want to spend more to have a better quality screen by all means do it. If you are prone to shattering the screen then this might also be for you.

Works great! Good bang for your buck considering the cost to get it fixed vs the cost to do it yourself. As others mentioned - Maybe a little bit plastic looking and feeling but I can deal with it. If you do this install and your touchscreen has dead spots - It might be a problem with the digitizer cable installation. You need to make sure the cables stay fully connected while you turn and move the digitizer to reinstall it onto the bottom half of the iPad. What happened to me was, I was moving the digitizer around a lot while trying to reinstall it, and the cables became partially disconnected, which resulted in some dead spots. So I took it apart and reconnected the cables and carefully replaced the digitizer as to not disturb the connectors, and it worked perfectly. When I had the dead spot issue, I emailed their support and they got back to me right away with the resolution. Very fast and knowledgeable support team experience for me.

Tyvärr var flex kabel sönder så skärm funkade ej.

Mon iPad avais la vitre en miette Maintenant il est comme neuf super produit

Very impressed with this digitizer. Includes various tools to help you with fitting. The quality is very good. A very good product at a great price.

Il vetro è di qualità superiore e nel kit è compreso anche il tasto home che ne facilita il montaggio. Bravi bravi bravi PS consiglio un tutorial nello spiegare meglio l’installazione..

Funkar bra