Projector Screen Material Ambient Light Rejecting Fabric 69x118 inch for Max 130 inch 16:9 Projection Screen DIY, Black Backing 4K Ultra HD Front Projection EVA Polymer Material (Grey)

**If you buy try to be there when the delivery guy hands it to you. And open it infront of him/her to verify your order is all there.** There has a mishap with my first order I received an empty tube. I contacted amazon and they shipped me a replacement three days later. However the replacement was missing the hardware. Nevertheless I had made my own frame and stapled it to the wood. I did not need the hardware to begin with. I did realize how easy the screen slips out of the shipping tube it comes with. The replacement was not packaged well just like the first. It comes in a long tube with the ends taped. The manufacturer should consider adding end caps to the tube followed by lots of tape. Installation was tedious the material is very thin and you can easily damage it if you poke your nails through the back when stapling. Be careful and take your time. Make sure the surface you lay this on is clean and perfectly flat. At night the screen does have a light "oily" (for lack of a better word) look to it. Almost like little sparkles. I can't quite explain it. It does not bother me as its all over the screen and not concentrated specifically but Im the only one that notices in my household anyway. Wish I could photograph it but my camera also doesn't capture it. I would buy this again though I feel the price is too steep for how thin and fragile it is. Yes I recommend this. Ok siri close app siri stop hot girls 99 hey siri fullscreen

Super needed I love how much this makes the quality better it makes the colors more vibrant as a regular tv would it was customizable to any size. The material is good and thick. It’s easy to assemble, I put mine on my wall with some double sided tape. Only thing is that it doesn’t come with a stand or frame. And make sure to use the grey side for best results.

The item itself is of good quality and works as advertised. However, the packing used for shipping leaves much to be desired. The packing was broken upon arrival and the screen has many wrinkles that are distracting.

I ordered this on Black Friday and just got around to installing it. Those complaining about wrinkles are not stretching the material correctly. You must work in a way slowly stretching opposite of where you just stretched slowly making your way across the screens length. This leaves 0 wrinkles. The material is thick and of quality. The Shipping method uses a rigid tube in a box that protects the material. My box was crushed but the tube was fine. My tube did not have caps but the material was not damaged. As others have said it rejects so much light to the point your image will become washed out. The dark scenes become almost unwatchable. Where I once had bright vivid colors with my white screen are now muted tones. Before you say you need to manage the incoming light in the room, there are blinds and curtains. This is for a living room not a theatre. If It was needed to manage the incoming light to that extent that would defeat the purpose of the material. I wanted this as an upgrade and that is not what I ended up with. I will be returning to my white screen. Attached are images with a lighted normal living room with a darkened room. Lights off with some ambient light. The video is with lights off,blinds closed, darker room. Long story short it’s dark. Buy if you intend on using in a really dark room.

At first I was sent a returned screen which was unusable because it had staple holes all over it and badly wrinkled. I waited another week for a new replacement and was hoping for the best. I made a frame a week before and watched all the different methods of securing the screen. I decided to try to use staples first and if that didn’t work I’d try to fiberglass poles. Staples worked. Hand tight. Make sure to keep flat. Also make sure that the suture framing within the rectangle is offset less than flush on the side that you’ll put the screen. If not the post will poke through. I’ve looked at samples from other companies that where much more expensive and this screen material is comparable. The main difference is perhaps that maybe the other company’s screen felt a tad thicker and stretchy. That might translate to being more forgiving with the set up but mine stretched out just fine. Google the pattern for stretching out the screen and you will be fine. As far as picture quality. It’s much much better than my wall. Also the contrast/darks are greatly improved. I have the viewsonic 701 4K which doesn’t have the best darks and the screen helped a lot. Their are a few spots that seem a tad loose but once a picture is projected I can hardly see any wrinkles. I’d really have to be watching and will only be obvious rarely. Can’t say another brand would have been any better and I believe it’s worth the price. Probably saved hundreds.

Initially, the quality seems decent. I stretched it out smooth in a custom frame. I took care and staples it every few inches. It turned out great. But then, when I hung it on the wall, a bunch of vertical ripples showed up. Now, because it's 75° F instead of the 65° F when I stretched it, I have a few other ripples now too. I'll be able to clean those up, but after a couple of weeks, the verticals still haven't smoothed out. They are very obvious and distracting, especially during action and on screen movement. The reflectiveness and brilliance during day and night are great! Honestly, if it wasnt for the vertical ripples, I woul give it 5 stars, but I can't.

I bought this to use with my 3500 lumen Viewsonic PX-747-4k Projector. It unfortunately took a lot of the Pop away from the image. While black values do look better, the image Brightness is flat, "Whites" are grey. I bought the Projector for the High Luminosity for the room it is used in. Pure Darkness makes the picture "normal". I have seen ALR screens from other Makes and I feel like I definitely got the quality I paid for :(. Posting some photos and a video, but honestly, take my word for it you will not be pleased with the product.

Love the screen Most of us are here as we cannot afford the expensive ALR but do want to use the projector in daylight. It took me a month to get the screen right simply because it takes patience. I am sharing steps on how I got perfect result: 1. As per your projector get the exact dimension of image you want on screen by projecting on wall. Get the length and height. 2. But pine wood timber which 1.5 inch wide. Home depot can cut it as per your calculation. Get "L" and "T" metal joints and wood screws. 3. Buy velcro tape from Amazon that has sticky tape on back. Photo Frame hanging brackets that have 2 to inch width 4. Buy electric stapler with 1 box of pins. Get Home: 1. Build frame. 2. Stick velcro and also staple it. 3. Open the screen and spread on "Vacuumed" carpet. 4. Put the frame over the screen. Now stick velcro to the film such that it will overlap with velcro on frame 5. Fit the screen on frame by sticking velcro. Start from middle. Try to reduce wrinkles. You will not get to "Zero" wrinkles yet. 6. Cut the extra screen material. 7. Stanup the screen and rest it on wall. 8. Turn up the AC to 90 F. In about an hour you will notice that the screen has loosened up more. 9. Now remove the velcro again and reattach with best possible stretch. 10. Return to normal temperature you like at home. 11. Wallah ! you have perfectly flat surface. 12. Using stud finder, laser level and photo frame hanger. Install the screen. PS: In my case, my wife helped me a lot in all the above stages. Kids were very patient.

Very good screen material which is stretchable and easy fir DIY. I followed the seller's video from U-tube using plastic ties stabled onto the wood frame and pulled and locked the plastic ties which stretched the screen and smooth out any winkles. The design of using a plastics tube to roll strength the edges is very good to evenly distributed the pulling force and avoid damaging the screen material. Very good and effective design of DIY screen installation plus very good grey colour. I can watch the movies' under ambient light. Highly recommend for DIY screen. Very cost effect.

solo un poco de problemas con la facturación, pero al final, todo ok

Excellent material. It is grey, and has a decent gain, so works well in less than perfect light conditions. As for the material itself, it is easy to work with. It came well protected in a tube. I used the IKEA Bjorksta frame, that I trimmed to form a 90" screen (200cm width). Note on stretching, do stretch it while it is a warm. If you stretch it in a cold room, once the temp raises 10 degrees it will sag, and you will see wrinkles. In my experience I made the screen in the spring, when it was around 20 and once the summer rolled in with heat waves up to 30 during the day, the screen became a "thermometer", showing wrinkles once it is hot. Luckily with he bjorksta frame I just re-stretched it on one of the warm days, and it has been great ever since. A slight hotspotting in the center can be observed if you are really looking for it, but it is barely noticeable in the movies. And I have a 1:1 through ratio, if you have a longer through ratio it would be even less for you. So for the price it is a great screen, some DIY action and accurate handling is required though. I suggest you order the samples of their material to see if it works for you. That is what I did.

Satisfied with the end product. It turned out very well. The quality of the projected picture improved compared to a white wall. No more glare reflects back to the projection. Downside: your frame has to be perfect. I used a wood frame. It is truly a DIY project. Missing dark black (velvet tape, shown at the end of the instruction video), no mention of that in the "what's in the package" section either, thus 1 star less.

I was worried the material wouldn't be a great quality but has exceeded my expectations. I built a screen frame and was able to stretch and staple it down no problem. Definitely recommend buying the material and building your own frame, and always buy a bigger size so that you can trim it down afterward. When mounting to frame makes sure you place the screen material on a debris free surface, I used a blanket so that I didn't scrap the screen surface. Just make sure you choose the right colour that works best for your lighting. For me I get a fair amount of ambient lighting so the grey material did wonders. I can use it anytime during the day or night. For those who are not sure what lighting is best for you, there are a few videos online to help with that, but the grey material should meet most customer needs. The best part is it comes on a roll that's sealed, no wrinkles present at all.