Yes4All Vertical Storage Rack, Home Gym Organizer, Barbell & Dumbbell Rack for 2-inch Olympic & Curl Bars

The rack is designed to accommodate 2-inch Olympic bars, curl bars, triceps bars, and dumbbells, making it a versatile storage solution for various types of workout equipment. It can hold up to four bars at a time, which is perfect for my needs as I have a couple of Olympic bars and some specialty bars. One of the key features I love about this rack is its vertical design, which helps save space in my home gym. It's compact and fits snugly against the wall, keeping the floor area clutter-free and maximizing the available space. The rack's construction is sturdy and durable, providing a secure and stable storage solution for my bars. It's made of high-quality materials, and the paint finish adds a nice touch to its appearance. Assembly was straightforward, and it came with all the necessary hardware. It only took me a few minutes to put it together and get it ready for use. Overall, the Yes4All Barbell Holder Vertical Storage Rack has been a fantastic addition to my home gym setup. It keeps my bars neatly organized, saves space, and adds a touch of efficiency to my workouts. If you're looking for a reliable and functional storage solution for your barbells and dumbbells, I highly recommend this rack from Yes4All.

I purchased the Yes4All barbell holder for two reasons: 1) I needed additional storage for my barbells and 2) I needed the profile of the barbell holder to be compact and vertically short. The majority of my gym equipment is from Rogue but they didn't fulfill those criteria (and neither did any other company). I have never actually heard of Yes4All but I thought I'd give it a shot. The biggest complaint of this holder is that barbells get stuck in the slots. I have not had that problem. I have five different Rogue barbells (three Power bars, a Deadlift bar, an Oly bar), a Troy shorty barbell, a Troy EZ curl barbell and a Titan V2 safety squat bar. I can place into and remove all eight of those bars into all five slots without any issue whatsoever. I either got lucky or they fixed that problem as of March 2024. It's not overbuilt like Rogue equipment but it's solid enough to get the job done. It's stable and the welds appear to be good. I would definitely recommend it, especially at the relatively cheap price point.

Quick story: We've put over 7 months and untold amounts of cash and long weekends into building our Covid gym in the detached garage. From getting rid of junk we didn't need in order to make room, to finishing the walls, adding outlets, putting in a drop ceiling etc- we are getting close to finally having it finished, but we are still moving equipment around to figure optimal configuration. Enter the pesky barbells- when not in use, we've been shuffling them around and they've been a nuisance and a trip hazard. I purchased a barbell hanger for my squat rack, but didn't figure it the mounting height and it interfered with the drop ceiling. Then I figured we'd mount them to a wall, but as things are still in flux,I hate to commit to drilling into our newly finished walls only to find out later that it would have been better if we had it hung it somewhere else. This thing seemed like the perfect solution for now. We only have two bars (this holds 5) and will probably add at least one more, but this gives the ability to store them safely, and easily move them to another area if we change our minds. I'm no gym snob, but I would rather by nice then by twice when it comes to outfitting my home gym. I have a lot of Rogue and Concept 2 equipment, and I proudly stack about a dozen Yes4All items (slam balls, kettle bells, battle ropes, etc) next to them in my garage. This thing is no exception. It has a beautiful powder coat finish (not painted, which will chip and scratch) so it looks great and holds the bar bells perfectly. IMPORTANT: One final thing worth considering is your ceiling height. Much like the problem I ran into with mounting my bar from a hanger on my squat rack, you need raise your bar about 7 inches vertically in order to insert it straight down into the stand. With the average men's olympic bar being about 86 inches, that means you will need about 94 inches of unimpeded vertical space to easily store a bar in this stand. In my case, I do have to push up against the ceiling tile and raise it up a bit to put it away, which does make it a bit inconvenient. But it's the best option I have right now until I decide to mount the bars somewhere on the wall. But with a lot of you who have have basement gyms or smaller garages with lower ceilings, this may not be an option and the product may not work for you. Overall though, I am very pleased with it at about half the cost of a Rogue stand before you include shipping. Hope this helps! Stay strong out there, folks!

Although we have a cable machine and a Bowflex, we've been doing more barbell exercises lately. As a result, we had an Oly bar, a standard bar, an ez-curl bar and a huge open trap bar that had been sitting on the floor. This was far from ideal, so I headed off to Youtube, Amazon and the other usual places to look into storage options. This one seemed like the best option for us as it's compact, holds 5 bars vertically, doesn't have to be bolted to the floor or wall. I ordered one when it went on sale. And it's great! We put the 45 pound open trap bar in the middle hole, and the other bars in the other holes. It comes with 2 adapters for standard bars, so we use one of those for my smaller bar. The adapter isn't a perfect fit, but it does work. And we have our floor back with our bars easy to get to. This thing is just about a foot by a foot, so it fits almost anywhere. We have no carpets, so it sits on a hardwood floor, where it's very stable; that being said, we have no kids or pets. We're altogether happy with the version D barbell storage solution. It's perfect if you have up to 5 bars..

Very nice holder that can accommodate 1” or 2” bars. It only comes with 1 2-1 adapter so you may have to get more if your like me running all 1” bars. The land mine portions feels smooth and solid. Good weight to it and holds without bolting but I will screw it down just to me safe. It does come with concrete anchors and bolts.

Sturdy, and easy to assemble. Stable and feels safe.

Works great for up to five 2 inch bars. Heavy, no worries about it tipping over. Cleans up the area of my home gym. No bars lying around any more. Just as good as some of the big name ones, without costing nearly as much.

I have a garage gym, space is limited. My bars were getting in the way and bumped into them while they were on the rack. I bought this so I could get them out of the way and keep them off the floor. I am happy with the whole purchase, from shipping to the product itself. This thing is heavy duty, it also does not take up a lot of floor space! My heaviest bar is my Titan SSB (61 lbs) I put that in the middle. I also have 2 olympic bars (45 lbs each) and 1 swiss bar (27 lbs) which also took up alot of space. All bars fit snugly into the holders, I tried removing a bar from different holders to see if it would tip. This did not move. I also sprayed a little wd40 into the holders just to make it easier but it wasnt really necessary. Good product, good price, well made!

Sturdy enough to skip the floor bolts.Gets pretty flimsy when using 25mm with the 30mm adapters. I ended up in designing a 3D model for a 25mm fitting now published on Thingiverse. Just search for Yes4All bar rack.

Works mostly well. Mine sits on a tiled floor so I needed to add some grip to the base to stop it sliding around. It could do with a bit more weight in the base to stabilise it, but otherwise it’s a good solution in my home gym.

Excelente calidad y aunque es algo costoso, vale la pena, incluso viene con dos adaptadores para barras de 1”. Me funcionó perfecto para poner todas mis barras ordenadas en un solo lugar.

Support de barres qui fait le « job ». Bon rapport qualité prix

Does the job for me. Have A safety bar, Swiss bar x 2, and 2 standard barbells on this and it holds them all fine without tipping over. A wider surface area would have been nice but it seems to be fairly stable.