AUTOSAVER88 Running Boards Compatible with 2007-2018 Jeep Wrangler JK 4 Door, Nerf Bars, Black Side Steps (Not for JL Model)

These look and function just like the OEM plastic running boards that our Jeep did not come with. Those run like 500ish, so this is a great aftermarket compromise to OEM. They install pretty easily, with only a socket wrench needed. My only installation complain was that in several places, I could not get both the lock washer and the regular washer on the bolts that hold the boards to the brackets and still get the bolts started. Seems the bolts should be just a little bit longer. So I installed with just the regular washers in several places and figured after a month or so of sitting there, I might take them off one at a time and try again to add in the lock washers. I did not remove any paint, but I did test thread the nuts onto the bolts where it says to remove paint. I did not need to do that, and I would suggest you try installation without going through that trouble. I had no issues at all lining up the brackets or the boards when installing. Everything just fell into place and was easy to tighten up and lock down. So this is a 4.5 star review, but I'm rounding up because I believe I will later be able to get those lock washers on there, and my wife really, really likes having these on her Jeep so she can wear skirts again when going to work.

Really happy with these foot rails! Single gal, and installed them by myself in less than an hour. I didn’t have the proper tools on hand, but I made it work. All tools used in photos. The Jeep dealership in Delray Beach, FL quoted me $1100 for parts & labor, so I decided to order these at $167 (they go on sale often) and do it myself! So far, no regrets! My only complaint is that the M8 Philips Drive Hexagon Bolts were too short to stack both the M8 lock washer and M8 flat washer, so I only used the flat washer. I hope they last a while! They look great! Don’t let the reviews about poor instructions scare you; they could be better, but you really don’t need instructions if you just looks at all the parts and have some common sense.

Im a single woman who is pretty darn good with power tools and fixing up furniture etc so the diy thing had me confident....the directions are truly terrible...just terrible and you'll get some plus there's a pdf on here that you cash grab (not the same). Here's the thing....if you have a handy person with sockets and a torque wrench and an understanding of lb pressure settings...you're good....but if you cant and don't know anyone then you need to ask yourself "who will I call". Because I called a lot of places and they didn't want to mess with anything from amazon or anything they didn't sell...it was a wall nightmare (and they shorted me an M6 hex bolt). I realized I would have to return for a more expensive but easier to install version (with actual videos) but at the last minute I found a local handyman on the neighborhood app and he did it for $50! I gave him $100 because I was so grateful. That being said....terrible directions, missing bolts, totally lost on what to do and yes it's dark dark gray not black ( but it looks fine...it's a jeep for goodness sake.)....you just can't beat the price and I'm barely 5'2" so I needed these so bad. I love them because they just don't look like the deal they really were. I'll try to attack photos but know all this before going in and you'll be fine.

I purchased these running boards for my Grand Daughters 2020 Jeep Wrangler. The webpage of this item clearly states that these running boards fit this 2020 Jeep Wrangler. The package arrived in good condition and my son and I spent approximately 2 1/2 hours assembling the brackets to the running boards to attach them to the Jeep. The bolts need to attach the 6 brackets to the running board were too short to fit, so I was required to go to the hardware store and purchase longer bolts. This cost a little over $18. Once fully assembled, we attempted to attach the board to the Jeep and found the brackets did not align with the holes that are pre-drilled in the frame of the Jeep. I contacted the supplier, only contact is via email and explained the problem and requested that they send the correct brackets. They informed me that there were NO OTHER BRACKETS. The asked what vehicle I was installing the boards on and the VIN. I provided all requested information. They said they could not find the VIN, but offered me $45 to have them installed locally. I called 2 places and was told by each they would charge in excess of $300 to install them. Obviously, the supplier has posted FALSE information on the Amazon Website. It took me over 2 weeks to get the supplier to agree to a refund. I suggest you do not purchase these running board. They are very nice, but probably do not fit you Jeep, and the bolts do not fit, so you will be required to purchase additional bolts to attach the mounting brackets to the boards. If you do purchase from this supplier, I suggest you first place the brackets under the Jeep to see if the line up with the mounting holes before you purchase additional bolts and spend a couple hours assembling them.

Parfait

Facile à installer, look super, on dirait un marché pieds d’origine

Installation très facile j’ai même réutilisé la boulonnerie d’origine du Jeep. A première vue le produit semble parfait pour le prix

The passenger side , all bolt holes do not match up. 2 of the 3 holes to secure it to the chassis was ok but the 3rd one does not match

Just putting these on now because the weather is nice and the mounting position DOESN'T LINE UP. BEYOND AGGREVATED !!! After having the brackets put on than putting the rail on to not have the holes line up . Ridiculous!!!!