INJORA Adjustable Front Bumper with Led Light for TRX4 Axial SCX10 SCX10 II 90046 90047 RC Car Upgrade Part(Black)

One of the best looking bumpers you can put on the TRX-4. This bumper looks amazing on the TRX-4 DEFENDER. Has 3 different mounting heights. I am running it on the middle mount height with the factory (Traxxas) bumper mount flipped upside down on my clip-less Defender. It fits great, it is made high-quality. Feels great and adds a little bit of weight to the front end over the factory plastic bumper. Best of all is the approach angles you get! I can clear obstacles now! Left the LED’s out. May use them later but keeping it simple for now. Took the factory TRX Defender “winch” and made my own custom deal for the center piece to fill the gap and for good looks. Check out the pics. Hope this HELPs.

Great looking, high quality, relatively inexpensive bumper used to replace my TRX-4 Defender bumper. Improved the looks of the truck tremendously. Mine was missing the shackles, not a big deal, I had others lying around. Edit: Look on the Injora website to see which winch fits this bumper. I bought an Injora winch on Amazon and it would not fit with the winch mounting plate attached. Once I removed the mounting plate, I was able to screw the winch into the bumper with two screws. It seems secure!? Only time will tell.... still looks great though!!!!

Good solid bumper and durable with working LEDs

Honestly? I want to like this front bumper more than I do. It fits the scale and the looks and was a breeze to install with a perfect fit. So why am I looking for another bumper? The winch mount only takes a smaller size but it holds it just fine and has no trouble hauling my heavy Defender nor anyone else's rig. It looks right, it feels right... but the ends are too wide and low so it destroys the approach angles! If it was more tapered perhaps? I certainly can't fault the strength given how many rocks it's bashed into and it finds itself used too often as a carry handle. The only other knock is one of the two LED lasted about 20mins before it failed and that was just running on a dirt trail, not bashing around.

Injora did it again with a good quality product

Sturdy, heavy duty (adds a significant amount of weight to the front end) and looks pretty good on the Trail Honcho. The brackets to mount directly to the frame I had to cut and drill holes in frame for it to work. Without doiny so the bumper would sit significantly further out from the grill of the truck. I have a fender liner that caused some annoyances as well but I did get it to work and I think it looks fairly decent. I'd liked to have been able to get it closer to the truck but honestly I was tired of messing with it. The Honcho body is about had it so ill be replaces it with a square body sooner than later anyway. Overall rating on the bumper with lights is a 5 star. Ease of install on my Honcho... close to 2 hours, modifications to truck frame and mounting brackets of bumper. Lights are sufficient brightness and are extremely simple to install. I will say my only complaint about it other than modifications stated above are it looks like it'll scratch easily.

Bought to put on my stock Element Enduro Sendero and it fits perfectly with the body style. This bumper is adjustable in height as the pegs that go into the truck's bumper mount attach to a metal plate that can adjust up and down by four positions on the back of the bumper. This bumper is set up with an area inside for a bumper-mounted winch, but I used this area to install a lightbar and mounted it into the holes drilled at the bottom for the winch. Looks excellent on the truck, I just wish there were some grey rear bumper options. May end up repainting this black as I can't find a rear bumper to match. Edit: May 2022, That's my truck featured in the description section of this item! Woo! As mentioned in my previous review above, I actually did end up removing the bumper and spraying it black to match my other truck accessories. I coated it with black and then a layer of clear coat. I fully expected that over time I would get scratches and chips in the paint, but they only serve to give that realistic "rugged" look I've always wanted in my truck. This bumper did survive a fall from about two feet up landing directly on one corner. I bent one of the rungs that go over the headlight but it was easy to slowly bend it back into place. So far this bumper has held up AMAZINGLY well. I have noticed that the plate that mounts the bumper to the bumper rails with four screws has bent over time...but it's still functional and has only moved the bumper a few millimeters closer to the body. I do not regret this purchase and still love this bumper!

Fits the scx10 3 base camp very well I’m happy with the short shipping time can’t wait to hit the rocks with it and have more weight up front. I am also very happy with the scale look and appearance of this bumper.

prima impressione molto buona , prodotto ben fatto

It’s a well built, sturdy front bar that fits my scx10i chassis and the range of different mounts makes it very versatile. The bar sticks too far forward for my particular body shell, but the parts still came in very handy to repair my broken stock bar as well as bling it up a little. I will definitely be fitting the bar if I get a more suitable body shell in future.

Queda perfectamente en mi TRAXXAS TRX-4 Defender. Substituye perfectamente al parachoques original de plástico, pero con mucho más peso. La única queja es que aunque no es difícil de montar, la falta de instrucciones hace que haya que cavilar un poco... En mi caso venía con un par de luces LED que no he montado ni probado (por ahora).

Good bumper but my warn winch was a little to thick so I had to shim the mounting plate with washers and USE LOCTITE when assembling. Bumper looks great on my rig still not sure if I want the fog lights in the bumper or not they are installed and I’m lazy so I’ll probably just keep them in Edit: The wires for the bumper lights ended up breaking maybe a month of use? Probably best off to just not install the lights

Fit is perfect for my TRX4 however when in it's highest position the front edge of the body sat on the light cables. Then I realised that the plug was to big for the Traxxas socket. The lights were just a bonus as I only wanted the bumper. Lights removed. Overall, pleased with the look and quality.