Ring Sizers Adjusters for Loose Rings, Invisible Clip-on Ring Guards(8 pcs)

This little thing is perfect! I got engaged recently and the ring is about a quarter size too big-- not enough to be worth adjusting, but a little too loose for my comfort. I got this and it comes in a pack so you just pick the one that fits your ring the best. I opted for slightly smaller than my ring band and then wiggled it on there, so that it is really latched to my band and doesn't budge. It just grips the band, there's no adhesive or anything-- so it is easy to pop on and off throughout the day incase your finger swells or anything. it is practically invisible too which is important to me. When I put it on, the ring was a little too tight, so I trimmed a little off of the ends of the clear piece until it fit perfectly. The ends where I had trimmed were a little sharp, so I just sanded them down with a nail file and now it fits perfectly and comfortably. It also fits better and doesn't twist as much, so the diamond on the top of my ring sits straight where I want it without needing to be frequently adjusted. If you still need the ring smaller once you have the clear piece in, the kit comes with little sticky strips that you can add onto the clear piece. I didn't need those so I can't speak to the quality of those! I have worn it for about a week now with no problems. I also have sensitive skin and usually get eczema where I wear jewelry, so I was worried about the cheap plastic piece, but I haven't had any problems with it! Would definitely recommend!

Product shipped fast. Package included 8 different spacers, easy instructions, a sheet of tack paper to create thicker spacing, and a polishing clothe. The spacers got many different ring thicknesses. Very easy to use. The smallest size is the one I used and I had to cut each little end tab off, as advised in the instructions. I used a nail file to soften the cuts I made. Fits right onto the ring band and the whole ring just simply slides onto your finger as normal. You can’t really see it unless your looking for it, especially on white gold or any other silver in color metals. This is not fixed to the ring, so keep in mind it does have the opportunity to move. Simply move back into place. This in no way is a permanent fix to the ring size, for sure temporary until sizing can be done. If the ring comes off like I have read in some of the reviews, then the ring was way to big to be wearing in the first place or you need to create more layer on the spacer with the sheet sticky paper that comes included. I would highly recommend this product. Easy to use, not an eyesore, comfortable, inexpensive, and actually does what it’s intended to do. 5 out of 5 for me.

While there are some improvements I would make (but unsure how the manufacturer would go about it), I still recommend purchasing this product! My ring appears to have a 1mm band but I am using the XS size because it did not seem like the XXS would fit. I was too scared to try the smaller size and this size was a tad tough together on and snapped into place, which makes it feel like the right size. Pros: --Barely noticeable once on --Does give a more snug fit to my ring --Many size options to choose from in the bag! (I was able to share with my best friend who's ring also slides) Cons: --My ring may not slide around, but now this spacer does and I have to adjust it back to center (palm side) --It's pretty wide for my very small fingers (my ring size is 3.5-4) Like I said, now instead of adjusting my ring to be "upright", I have to constantly adjust the spacer, but it's still worth it as I think it is helping keep my ring on without falling off. It also looks better, in my opinion, than the photos of ones that wrap around the band like a spiral. That being said, I haven't tried those so maybe I should! Also, getting the piece to snap in place took some patience. I had to put the ring on, then wedge the spacer under the band while on my hand. It did snap in place, which was both satisfying/reassuring, but also freaked me out a bit. :) Hope this helps!

Interesting. At first, I hated these, because they are loose and come right off the ring when you take the ring off. I lost one down the kitchen sink as I was taking my ring off. I wasn't expecting the sizer to completely fly off. I was expecting them to be MUCH softer and pliable and sticky, like a slightly gummy silicone feeling that would stay/stick on to the ring and not just fall off. You can't even really bend them enough to make them into a circle shape like your ring is in. They are kind of a hard plastic. I returned them and ordered the soft coil ones that you coil/wrap multiple times around the metal band. But then I discovered the pros and cons of each. I have mentioned the cons above. The pros: you can simply and easily use the same one piece on different rings. You can wear the same ring on different sized fingers easily depending on your outfit due to the ease of interchanging/removing the sizers. They are virtually invisible. And the seller promptly refunded my money 🙂 However, the wrap around coil types are nice because they stay securely on your ring when you take it off your finger. They are soft and pliable. You get a TON of coil to use and cut. However, they are bulky and ugly looking at your palm. I have decided that each kind is decent depending on your wants. Until someone makes a better designed ring sizer (like a soft, silicone one that will softly stick to the inside channel of the ring and so be invisible, helloo)...

I uploaded a good amount of photos (6) with this review to show what comes in the order, which was: 8 different sizes of band size adjusters, a silver polishing cloth with an advertising sticker for a survey that will supposedly result in receiving a "...free set of the size you need" which I'm hoping is legitimate, because that's the main reason I'm writing a review LOL, as well as a sheet of adhesive stuff if you need it. That said, the XS adjuster (2nd to smallest) fit my ring band perfectly, it slightly clicks onto it and I did not need to use any sticky tape adhesive (stuck to the back of the product picture card that was in the ziploc bag which you can apparently cut and use, I imagine this is tedious!) I also attached pictures of how the adjuster looks on my ring; it's very discreet and worked perfectly for me for how tight my ring should be compared to how loose it was previously. If your ring pulls off your finger with minimal resistance this will likely work well space-filling-wise. If it's basically falling off your finger it may be beyond (this) ring adjuster saving. This adjuster makes it so I have to actually twist and work my ring over my knuckle to take it off as opposed to just lightly pulling it down my finger (it wasn't falling off but coming off too easily). I'm glad I got this and I'm glad one of the adjusters fits my ring so well. No adhesive needed and I can sleep with it on, wash my hands, and what have you without the adjuster coming off. I imagine it would only unclip from your ring band if it just doesn't fit the precise size of the band.

The snap on ring sizer does not stay on when I remove the ring from my finger, even with the double stick tape. For my relatively small ring and finger size, it was like playing Operation to cut to size and make adjustments. I do not recommend for ring sizes under 6, especially if the adjustment needed is less than a whole size. I had high hopes for this as it came with many sizes, and I have a 2mm wide, size 5.25 ring. I wanted to bring my ring down to 4.5-4.75. I started from the smallest size which did not go on my ring so I went up to the next width. It seemed like a good fit so I started with that and it made the ring far too small. I kept cutting one end off a little at a time until I could get the ring to fit with the sizer and ended up cutting more the half off the ring sizer. The cut ends were sharp so I used a nail file to sand them to be a bit smoother and washed and dried it before placing the sizer in the ring. It seemed to be a decent fit and brought the ring down to 4.5 measured on my ring sizer. The problem is that the sizer would fall off when I took off the ring. I then added a strip of double stick tape on the ring that comes with the set. The tape is cumbersome as it’s not pre cut. The tape is a thick rubber and added additional thickness to the sizer, making the ring I thought I had cut down perfectly to be a size 4 as measured on my ring sizer. I then tried to cut down the sizer so that it gets to the right size with tape but there is no way for it to stay on when it it so short and can no longer grip the ring at all. Total waste of time and money. I tried the next size up on a larger band for a different finger (size 6) and had similar lack of results. The taped on sizer fell off the ring within an hour of putting it on and I didn’t even notice. If you have a small ring and need to make minor adjustments, this product is unlikely to work.

These are small pieces of silicone (or soft plastic) that you fit to the inner diameter of a ring that is too big. They take up the extra space, and you don't have to get the ring sized (cut and re-soldered). They're inexpensive, easy to apply, and they stay on well. The only tricky bit that I encountered was in figuring the right length of this to use. I had to cut a bit off to make the sizer correspond to the fit I wanted. It was a process of trial and error, which worked out fine because there is more than one piece given of each width. Now I can wear my amazing turquoise ring WITHOUT the wad of adhesive tape I needed to keep it on! :) This is a great product, and the sizing pieces range in width to work with ring shanks of varying sizes. It's nice to get such a variety in one package, and I especially like that these do not require the ring shank to be wrapped in plastic like the "spiral" ones. The sizer fits within the ring itself, so it's all but invisible and doesn't make the shank impossibly wide.

Love these clear snap-on ring sizers! I didn't have any issue with popping them on, and they definitely keep my rings from sliding around. I like that it's also not a 100% tight fit, because I like a little bit of movement with my rings; I just don't want them sliding completely around 180 degrees. These sizers keep my rings on top of my finger, while also allowing for some wiggle room. They are barely noticeable while I'm wearing the rings. My only "gripe" would be that I wish you could purchase these sets in sizes, since I have no rings that would fit the largest sizers, and several that fit the smallest, but I've used the two that came with this set already so I need to buy an other set to get those sizes. The price point is pretty good though, so can't really complain, but it would be convenient to be able to buy 5 of the same size instead of having all these leftover pieces you won't use. My sizers haven't popped off, and I wear them for all my daily activities including cleaning and working out, so they're pretty secure.

These little invisible ring adjusters were perfect to fix my problem. My ring was too large, and I was afraid it might fall off and I would lose it. There are several different sizes to fit any thickness of band. I found the one that fit my ring, popped it on and it was perfect. It truly was invisible, and my ring fit as it should. Also enclosed was a clear sheet of adhesive material that you could cut to adjust the size it the correct thickness was not in the adjusters sent. Also a cute little polishing cloth to shine up your ring!!! Great product. Very Happy!!!

Invisible , but not very comfortable use for long term

We later got the spiral ones and found them more suited to the needs of the recipient. These were really easy to slip in and very invisible, so would definitely be the better option if you want something that doesn't show, but they don't attach securely to the ring, so you need to be a bit more dexterous. The spiral ones take a bit of faff to wind onto the ring, but once they're there, there there - you don't have to adjust them every time you put your rings on. The spiral sort are visible, though (in a subtle way) - it's a matter of what's more important to you. Whichever style you go for, it's a heap better than getting your rings re-sized!

Works very well and is comfortable. Just need to get used to the feeling of the clip being there under the hand.. but it has made a big difference to the size of the ring while I decide if I need to get it resized! one trick - I originally clipped it on to the ring first and then tried to slip the ring over my knuckle. It seemed too tight so, following the instructions, i cut it a bit smaller. I later figured out that that (if you have larger knuckles and the ring slips around) it works much better to put the ring on first and then attach the clip while on the finger, so it stops the swinging. It then won’t come off over the knuckle either. To take off, you simple pull the clip off first and then take the ring off. It works well.

I wouldn't waste my money again. Wouldn't stay on my single ring but was great when there was one on each side. I lost a couple of them. One in spaghetti that I had cooked for my mom