ELUTENG 90 Degree USB 3.0 Adapter 6Pack Right Angle Male to Female Adapter

Resin printing is smelly, no doubt, so one of my first projects was to build an enclosure that can be vented to the outside. It was a tight fit for the washing/curing station and the printer but I made it work. I used a USB extension cable from the inside of the enclosure to connect the USB stick. The cable was a bit too bent for my taste so I searched for an L-adapter. I then decided to get a bit fancier and replace the USB extension with one that is usually used in automotive or marine vehicles (one that can be snapped into a console). I then used a second one of these adapters for the outside so that the stick doesn't poke out horizontally and is at risk of being torn out. The adapters fit tightly and it's even a bit tricky to get the stick unplugged, but better than it being too loose and it falling out.

Great product

There are times when a particular USB port on a PC can be downright hard to reach. These little 90 degree adapters can be a real help when needed. I use these on a few different PCs. The one that needed this the most is the rear port on the little Acute Angle Mini PC. This little PC only has a single rear USB 3.0 port. You almost need to be a contortionist to plug anything into the rear port. This adapter is no easier to plug into the rear port but you only need to go through the hassle once. Once this adapter is in place all USB peripherals are easy to plug in. For this particular PC, I plug in a 4 port USB 3.0 hub and leave it plugged in. Another benefit to these is once installed, there is no more wear on the PCs USB port. It's uncommon but there is always a risk of ruining a USB port while trying to plug something in. I've done it and I doubt I'm alone in this. If you ruin the female port on an adapter it's very cheap to replace. If you ruin a USB port on your PC it will be both difficult and expensive to replace. This is a very small amount to spend for a great deal of protection.

Save room in tight spots

These adapters do just what you would expect them to do. They change the direction of the female usb input 90 degrees. They can also be plugged into each other so the direction can be changed 180 degrees which is how I used them to direct usb ports located on the front of my desktop to the rear. Just be aware, in the packet of 6 adapters 3 are configured to change the direction one way, like to the right, while the other 3 change it in opposite direction, like to the left.

Perfect for what I need them for. No complaints!

It works but its a big & bulky USB adapter And it only works one wat on each of the adapts

Sometimes you need a right angle cable connection, this solves the issue at a nice price, and you get three of each orientation, which is necessary since the USB connector orientation is not standardized. This problem will eventually go away when USB-C eventually takes over since its connector is symmetric and doesn't have an up or down. But you may still need a USB-C version of this if your device is in a tight space without much free space where the USB ports are located and you need to come out at a right angle.

These do exactly what they advertise, nice short 90-degree extenders/elbows. I only needed 3 but no biggie had to order this larger package. USB speed matches what is advertised so no loss and no latency.

Muito bom, recomendo. Atendeu minhas expectativas.

bought for confined spaced. They work.

These work great to charge my samsung s22, they are just a little bulky and stand off the wall a bit past the baseboard width, so you can't just shove a dresser In front of them amd run your cable up or down if you have them in a USB enabled newer plug socket.

Excellent produit