Ceiling Mount Pull Up Bar with 48” Straight Bar and 14” Risers, Fits 16” and 24” Joist by Ultimate Body Press

Great pull-up bar! Bar is 1.25” - perfect diameter for getting a solid grip. I returned a different brand that used thicker tubing because it was too hard to grip. I mounted mine to an I-beam using clamps and some steel bars - super solid.

Great bar. I like the simple but sturdy design. I ended up installing it on the wall instead of the ceiling, and it worked great. I am 210 lbs, and the bar holds me with ease. I strongly recommend this bar.

Super great quality and price! Thick bar and the assembly was so easy. Good grip and very steady mountability/durability.

Solid, well built piece of equipment. All the parts are carefully packed and the installation instructions are clear and helpful. My ceiling joists may be a fraction off, but as I measured them and installed the bar, the bar was fractions of an inch off center. I was still able to install the bar with a high degree of confidence in its integrity, but installation is a little tricky because there are three parts connecting to each other instead of being one solid piece like some other similar products on amazon. My one complaint is that there was a chip in the paint on one of the supports. Aesthetically it doesn't bother me, but I live in Hawaii and the bar is mounted on my open air (covered by a roof) deck. I'm hoping there are no rust issues, but I suppose only time will tell. Overall, though, this is a great product and it's quite comfortable to do pull ups on.

I installed a pull up bar using pipes from a hardware store previously. The issue was weakness at the pipe threads. Because I was concerned about getting injured, I shopped around and this was the only I could find for around 100$ that had a non-moving bar. I also wanted a simple single bar, not a double bar. The pros are it is easy to install, it doesn’t budge, even when I (accidentally) kip. I weight 220 pounds, so that says a lot. The bar is appropriate length and circumference for a proper grip. I am 5’7 and installed on 9 foot rafters it’s perfect. I need to hop up or use small step. This is good, as I don’t want my feet to touch the ground. The screws, nuts and bolts are correct. The disadvantage is it’s expensive for what it is, three pieces of painted metal and some nuts and bolts with a greasy wrench and hex.. The “wrench” is kind a joke, it It can be used. A drill bit would have been more useful. The grip is too smooth, like most pull up bars. Like most fitness equipment, grips are either too smooth, or knurled to the point they rip up your hands. I use tennis ratchet grips (it took six) to wrap it. It is probably a foot too wide, not an issue, as you could attach accessories to the extra space and do really wide pull ups. It would be helpful for it to include a cutout on the box for install. You definitely need another person or straps to install it. Time will tell, but it’s great so far. I do think it’s a bit expensive for what it is, but nothing else really compares. The inconveniences are minor, so would recommend.

In my spare bedroom I have a workout room setup. I needed a way to do pull ups with P90x3, and I HATE the bars that mount to door frames. I wanted something to mount to the ceiling but not be so low that I had to bend my legs a lot to do pull ups. I have 8ft ceilings so I started researching and came across this. Yes the bar is perfect for an 8ft ceiling. It would be fine for a 9ft one as well but you will have to jump to reach it. I'm 5'8" and I can touch the bar with my fingers flat footed. The bar is very sturdy and very well built. I took a lot of time finding the joists. One thing I did was peak in my attic to see which direction they run. I then used an electronic stud finder to locate the joists. Marked them off and I made a very thin pilot hole to make sure I was dead center. Once lined up I did another test drill on the other side of the bar it was exactly 48"OC. The bar is secure and is not going anywhere. If you need a pull up bar this is highly recommended. EDIT: It's been about 2 1/2 years and still really enjoy the bar. I wrapped it with hockey tape which helped my hands from feeling so sore. My wife is now 5 months pregnant which means my workout room is now going to become the nursery. Thankfully i'm building a very large man shed and the pull up bar is going in there. I have been using the bar to help me stretch. Since it's an 8' ceiling I can easily reach it and hang to stretch my back, shoulders, and arms. I still highly recommend this.

Easy installation in garage

Very solid pull up bar. I'm 230 pounds and it holds well without moving at all. I noticed that all four plates seem to be slightly concave instead of flat and will flatten out as you tighten the screws. I'm guessing making the plates that way might have been by design so everything holds much tighter and makes it all one solid unit.

Es un buen producto sólido y muy útil en diferentes tipos de dominadas y ejercicios Pero tiene sus defectos 1 no incluye taquetes para concreto Solo incluye unas pijas para instalar en madera 2 el precio es muy elevado por el tipo de producto Consigues algo a mejor precio con otros vendedores 3 incluye juegos de llaves para su instalación pero son muy fáciles de doblar y romper Al no incluir taquetes d concreto gasta uno más en los taquetes y en las brocas adecuadas Fuera de eso es muy sólido y práctico para entrenar Incluso instale una polea en la barra y funciona de maravilla Es mi opinión al respecto de esta barra

Good quality

Wonderful !!!

Le faltan las tuercas, producto caro e incompleto.

This is a very sturdy pull up bar, easy to assemble as long as you have a drill with a hex attachment!