Photo Box, 8 PCS Backdrops Travor Photo Light Box 24 x 24 inch Dimmable Photography Lighting Shooting Tent Kit with 126 PCS LED Lights, Portable Bag (White Black Red Blue Green Yellow)

I create craft projects where the need of a great picture is very important and the use of this photo box is being taking my pictures to a different level. Starting with the easy assembly of this photo box pretty much self explanatory and the practical and easy way to travel with the nice case that hold all the pieces together. If you need to go out and about as a photographer this is a great photo box measuring 24*24 inch to travel with everything fit in a case and is easy to assemble back when is need it. The quality of the lights is excellent which make you photos to be clear and brights. What I like the most is the LED light bars are movable. The photo box include four different colors background which are very easy to exchange with the use of the great quality velcro attachment it brings and slip into a pocket at the front. So far I’m more than happy my picture projects look more professional and I don’t have to keep looking for great lighting or specific areas to take the photos, now I can just put my projects in the Travor Photo Studio Light Box and take beautiful pictures in seconds. I highly recommend you getting yours.

Took me less than 10 minutes to set up, lights were sturdy and easy to clip into place. The aluminium rods are well made and I particularly liked the spare three way connectors in case you lose or break one down the line. The zippers were also not an issue for me, as long as you're gentle and don't tug hard on them because you're impatient, it shouldn't be a problem getting it together as they seem well made and durable. The backgrounds are rolled up tight when you first open the bag, but in my experience, this actually helped me pop them into the slots, plenty of room for them to slip in there, no issues with them falling out they're certainly long enough. Watch the video provided on the listing if you can't figure it out, though really, it's so easy to put together I didn't need the video. The light dimmer works well and the wires are kept tucked away in a convenient flap up top so they don't fall into your pictures when shooting. In conclusion, I'm very happy with my purchase, of course I haven't tested extended durability, I don't see why this, like anything else, wouldn't last for many years, as long as you don't slam it around or yank on anything. Which you shouldn't be doing in the first place with any equipment. Would buy from this manufacturer again, 100%.

Great photo booth. It was pretty easy to set up without even looking at the instructions. I like that it has so many background choices. It definitely has plenty of space for capturing good images of my products I'm listing. The adjustable light is great as well. The soft light filter is great and easy to install. I just wish it came with a spare one or that they gave the option to order one more.

This 24" Studio Light Box is pretty great, but still needs work...both on the device itself, and on your own. What I Like: -24" size is great and can fit most products, but don't be deceived by those ridiculous photos of a full size luggage or stroller. That ain't fitting in here lol. -The frame is well made as it is mostly metal. And they do provide some extra corner connections and LED mount pieces. -Speaking of the lights, they are BRIGHT! Which is always nice for photography when you want to show off all the details. And being dimmable is a huge plus too. -The lights are easily mounted in different spots. Because it is a perfect cube, you can snap the lights into place above, on the sides, in the front, etc. Also, they have a clickable swivel to change the angle of the light as needed. -There is a small top opening and a bigger front opening for shooting, but if you need, you can unzip the sides completely to place and adjust larger objects. -It comes with a decent carrying bag! buttt..... What Needs Work: -The zippers. This is the biggest issue I have so far as they conform around the cube shape very precisely, which causes a tight fit. In turn, the zippers are tough to pull and get stuck/split when setting up. If you have no need to disassemble this for transport, it's not a deal breaker, but if you do, it can be a pain to deal with. -The lights, while bright and dimmable, I wish I could dim down a bit more. It could also use some diffusion. Since they are bare LEDs, they show up easily in reflective products. They are really bright though, so you can try angling them towards the opposite walls to bounce the light. There is also a diffusion cloth with 4 clips that can help break down the harshness of the light. -Not really something that needs work, but would be nice to have more neutral colored backdrops included. Tips: I found that the white background is the most usable, just slightly overexpose your shot or image in post to try to make it all white. The other colors are hard to get that clean "infinity background" look due to the way light hits it and the imperfect flat/smoothness of the material. The color will also reflect into all the sidewalls and can give your product an undesirable color cast. I'm still figuring out the best ways to angle the LEDs to light certain products, and really, that's the key. If it doesn't look right, reposition your light angle or completely change its position in the box. You can also try bouncing it off the opposite walls. For products with a lot of angles, try moving the lights to just one side. This will give you a slight shadow side and create depth to show off the features more. If you are using a cell phone, try using your telephoto lens and/or use the zoom. This will narrow your focal range and you won't get the side rails in the image. Final Thoughts: If you have your own wireless speedlights, backdrops, flat lays and understand lighting, you probably don't need this. BUT, If you have no studio or lighting gear, are inexperienced in product photography, and just need a way to setup and shoot well lit products you list, then this a great option for an all-in-one solution (provided your products fit inside).

Wow, I am absolutely delighted with this lightbox which is a huge improvement over my white nylon cube with small floodlights on each side. That light was never bright enough and there were always noticeable shadows. The very bright LED lights in this new box are self-contained in the box (you can also vary where you place them, such as top, bottom or sides), so there aren't three items to crowd my bureau (box and one light on each side) but just one black box AND it has a door you can roll up (or DOWN to keep my cat out of it). I am delighted with the light brightness so that I can take photos of my jewelry I sell on Etsy; I may not even have to use fotofuze to adjust the brightness on my photos after I take them. That would save me a step. One note: assemble the steel rods in their white plastic corners. It is hard to push the rods in as far as need to be. I used a rubber mallet to LIGHTLY tap a corner, rod and corner assembly until the rods are all in as far as they will go. You don't have to tap real hard. If you don't do this the black fabric cover will not fit at all. This was the problem with one of the other reviewers. Once they are all tapped in, fit your chosen colored background inside the completely open fabric cover, as shown in the diagram in the directions, and then start zipping. The first time you do this you will need to make sure the rod cube is tucked ALL THE WAY into the fabric corners. It will slip free at first. Be persistent, fit it carefully and slowly zip all around. It will mostly get stuck at the corners, so you may have to adjust the fit by using the mallet on corners that may not be all the way tapped in. Keep at it. It takes a little bit of time. I will be keeping this assembled on top of my bureau for photography, I can see this being a bit of a pain to always get the fit right if you have to take it down, move it and then reassemble it. Perhaps those plastic fittings stretch a bit as they hold the ends of the rods. Otherwise it does take about 20 minutes to put it up. Still, the quality of the light, which adjusts, is glorious and my jewelry looks super in the light. Can't wait to use it for a photo session. AND the price was not prohibitive either. Once set up it is very sturdy and the corners tight. Not wobbly.

I decided to pay a little extra money to get this higher-quality lightbox, and I am glad I did. The delivery driver just showed up, and I opened my new lightbox right away. I am very pleased with the thickness of the black outer shell with the reflective inside coating. Certainly not thin or sheer by any means. The zippers are sewed into the material quite well. The aluminum tubes for the frame are thick and sturdy. I am quite pleased with the 3-way joints that fasten at the corners of the cube-shaped frame. Very sturdy. I am extremely happy to see that the sellers included EXTRA PARTS for the frame and for the LED light fixtures — a genius customer service move! Zipping the outer shell over the frame was quick and easy. You should use some common sense when zipping around the corners. The shell fits snugly on the frame. The LED light bars fasten to the frame anywhere you want, so you have plenty of versatility in your lighting configuration. The light bars also swivel about 90 degrees adding even more flexibility. On full power, the LEDs provide tons of light. I pulled mine down to about half power to create these test shots you see at the end. Overall, I give this lightbox a full 5-start rating!

Many parents with kids will be buying lots of stuff for their little ones. If you can take a good photo of the item once your kid grows out of the clothing or loses interest in the toys, you will have a better chance at selling the item at a higher price than if you photograph it flat on your couch or floor. This box at first was a little challenging to set up, but with my hsuband's help, we set it up in about 10 minutes. We found that it is easiest to set up the frame, LED lights and then zip the cover around the box partially, and then finally insert the color background. When we inserted the background first, it was a bit tricky. Now that we know what way works for us, it will be easy. We will most likely be using white and gray backgrounds but you get more colors. The LED is dimmable as well and you can re-position the two lights as you wish, either on the top or sides. I've included some photos of the light box as well as some sample photos of items I photographed inside the box. This is a good investment because over time, the extra money you can get from better photos will pay for itself easily.

Overall, this is a decent product for hobbyists or amateurs who just need a “good” lightbox for their needs. It does have a few mildly annoying design flaws from my experience thus far though. Pros: -The dimmable light feature is handy. -The two entry points into the light box are useful for both arranging goods within and taking photos. -The light bars are relatively easy to move and have versatile mounting positions in addition to swiveling mounts which can help direct the light in the direction you want. Cons: -The zippers could be a heavier weight or the box could be designed with a slightly larger seam allowance. The zippers on mine are already skipping teeth and separating—I’ve only fully unzipped it three times since purchase. -The light bar plugins seem a bit touchy. One of the bars in my kit, if not positioned “just so”, does not fully illuminate unless adjusted by hand prior to shooting. -The backgrounds could be a smidge larger. It may be because mine are still “springy” from being rolled up in the original packaging, but the edges of my backgrounds do sometimes slip from their pockets. Since the sides of the backgrounds are slightly narrower than the box rods, when the bottom edges do slip out of place, the sheets curl up between the rods so the background has to be reset before continuing.

ممتاز وعملى جدا ويمكن اصطحابة فى السفريات بسهولة

المنتج جيد لكن هناك اختلافات عن المواصفات المعروضه: ١. الليدات ليست صفين متحركين يمكن ضبطهم لكن دائرة ليدات ثابته ملزوقه أعلى البوكس ٢. ليس معه وحدة باور كما هو مذكور . يحتاج إلى شاحن موبيل لكى تعمل الاضاءه ٣. ليس الماركة المذكورة (تريفور) . بلا علامه تجاريه. من الممكن يكون تقليد صينى للاصلى المعلن عنه. ٤. ليس معه الشنطه الدائرىه الموضحه فى الصور. لكن معه شنطه قماش رديئه دون المستوى. هذا غش تجاري واضح.

طبعا الي وصل حاجة مختلفة تماما غير الصور يعني وحدات الإضاءة الموضحة في المنتج غير موجودة هي وحدة ثابتة غير متحركة مثبتة في سقف البوكس واضطريت استخدمه لان للاسف مكنش في وقت للاسترجاع ك، لا انصح بالتعامل مع البائع لانه غير امين بالمرة، وطبعا شكرا لأمازون علي سرعة ودقة موعد التسليم كالعادة

المنتج كويس لكنه مختلف تماما عن الموجود بالصور والاضاءه مش اقوي حاجة هتحتاج اضاءة اضافيه للتصوير

للأسف المنتج مختلف وغير مطابق للمعروض. أولا نظام الإضاءة مختلف تماما وأقل جودة بكثير مع عدم وجود شاحن أو وصلة طاقة بالإضافة لنظام التدعيم أيضا مختلف جدا ولا يوجد أي هيكل أو دعائم لتثبيت الخيمة وأيضا نظام خلفيات التصوير مختلف تماما عن المعروض وغير عملي بالمرة. إجمالا المنتج مختلف كثرا عن العرض وغير عملي لحد كبير.