Replacement Headband Cushions pad for Bose QuietComfort 15 QC15 QuietComfort 2 QC2 Headphones Repair Head Band Pads with Plastic Locking Clamps (Not Suitable for Others Headset)

Looks and feels like real leather. Looks as good as new now. It was a little tricky to install so I rolled back the leather and cut some of the foam and plastic material away from the side where the zipper ends up so that I could tuck it into the clip. The other side tucked into the clip just fine. Took about 20 minutes. I saw other ones out there for as much as $30. This one is probably the exact same one but only costs $13.

The somewhat challenging install is worth the effort because the result is a nice, new headband pad for your Bose QuietComfort 15 noise-canceling headphones making them wearable again. Installation is not overly difficult but does involve some manual dexterity. Since no instructions are included I recommend going online and watching a video on installing the headband cushion pad. The most difficult part of the installation is pushing the excess material into the headband clip with the "bump" and then securing the bottom half of the clip and screwing the two halves together. It might take a couple of tries to get it right. If you have a screwdriver tip that fits the included screws, I recommend using it rather than the provided screwdriver which is quite small and not easy to use. Also, the clips are designed so that the zipper ends fit into "bump" on the upper piece. You can, as one reviewer did, not put the zipper ends into the "bump" that makes the installation easier. However, this is not the correct way to do it and the result will not be as "clean" looking.

Was a bit fiddly to get the caps installed correctly, but its super comfy, looks good, and seems to be of higher quality than the OEM design that comes on it new. Will be buying another for another pair of headphones soon!

Great fit and easy to install! Unfortunately, it didnt come with installation instructions. But YouTube was great...fyi some trimming is required for good fit.

Pros: - good feel to the material - comfortable on my head - good looking - easy to install the replacement headband material (but not the clips) Cons: - the plastic end clips are very poorly designed making installation extremely complicated - supplied screwdriver head didn't fit the supplied screw heads It took me over 1/2 to put the headband on and fasten the clips. The biggest disappointment with this product is that the plastic end clips are very poorly designed and require you to trim the headband material and internal plastic stiffener. Even after trimming, the clips had a very difficult time fitting over the material and screwing them together was a chore because you had to align the two halves of the clip as well as the headband material so the screws would protrude through the two notches cut into the Bose metal headband frame. It would have been better if the clips would be able to be clipped together mechanically to hold them in place while you screw them together. No instructions were provided for assembly, but once I figured out that the zipper head should be outside the clip and not inside it, things went together a bit more easily. I still get the feeling that there is a excessive amount of stress on the molded plastic screw receivers in the big clips and that I can see the stress working their way out or the clips snapping off. After the headband was installed, it looks and feels good, however given the amount of effort required to install this, I would not recommend this particular headband replacement.

I purchased this item to replace the worn out headband for my Bose Headphones. It works great and is comfortable.

Very comfortable and a great replacement from my old worn out banded pad. I would recommend next time including install procedures with the product. It took me a quick minute to get it figured out but glad I did. Yes, I bout two, so this review is so the same!

My old ones were literally falling to pieces. When you touched them your fingers came away blackened from the old rotting cover. This one for, was fairly easy to fit and together with new ear pads has made them completely useable again.

Prese per le Borse della moglie. Fissate senza problemi sulle cuffie, fanno quello che devono fare. La moglie è soddisfatta e io pure!

A perfect way to replace the old headband cover and ear pads on my Bose QC25 ‘phones. Good instructions, and relatively easy to install.

MAJ- après des échanges avec le vendeur proposition rapide pour rembourser le produit ou en renvoyer un nouveau ! Top le service client. Le produit est de plutôt bonne qualité pour son prix. Seul problème l'installation sur le casque car la fermeture éclair était défectueuse.

イヤーパットとヘッドパットが加湿分解してベトベトになり、捨てようかと思っていたQC2ですが AMAZONで見つけた補修品で両パットを交換し、再び使えるようになりました。 ボロボロになったパッドのカスは衣服や白いソファーを汚し、台無しにしますので要注意ですね。 このキットは他の方も言っているように手触りは良いのですが取説が無く、不親切です。 私は１５分程度格闘しやっと装着しましたが、以下正式か保証出来ませんが 私の行った交換方法を書きます。 オリジナルのパーツは外して捨てます。まずパット両端に付いている樹脂パーツのネジを外します。 次にボロボロになったオリジナルのヘッドパットをハサミで切り外しこれも捨てます。 このキットのパーツをファスナーが外側の上方向に来るようにセットし金属のヘッドバンドを包みチャックを閉めます。 付属の樹脂パーツでパットの端を挟み込みねじ止めします。ファスナーの留め金がある方の処理にやや苦労しますが丈夫なピンセットを使い樹脂パーツの中に押し込みながらネジ締めすれば完了です。やや苦労しましたが修理後は実用的な状態に仕上がりました。

Den mitgelieferten Schraubenzieher kann man vergessen... außer man hat die Hände eines Säuglings. Der "Trick" mit dem Reissverschluss ist schon genial - sieht zwar nicht mehr 100% wie das Original aus, aber immerhin ist das Polster jetzt neu. Apropos Polster: das Alte MUSS entfernt werden - irgendwo schrieb jemand, dass es über das Alte gespannt werden müsst, was m.E. völliger Nonsens ist, weil es sonst viel zu Dick ist und unter Spannung steht. Also... mutig das alte Polster und die beiden Kappen entfernt, das Neue drüber und die neuen Kappen draufgeschraubt und gut ist. Es gibt einen Stern Abzug, da die Maße des Polsters bzw. des sich darin befindlichen Plastiks zur Stabilisierung bei mir etwas zu lang sind und so auf den Kappen ein "Druck" entsteht. Ich hab's gelassen, rate aber dazu das Plastik mit dem Cutter evtl. um einen Millimeter pro Seite zu kürzen.