Ferr-L-Tite Cool Flex

I’ve been using Bohning’s Ferry-L-Tite Cool Flex hot melt glue for several months now on my carbon arrows, and it’s become my go-to every time. This stuff makes gluing in arrow tips (both field points and broadheads) incredibly easy. It melts quickly and evenly at a relatively low temperature, so you don’t have to worry about damaging your shafts. The flow is perfect — not too runny, not too thick — and it sets up fast once you seat the insert. Cleanup is a breeze too. Most importantly, the hold is rock-solid. I’ve put hundreds of shots through these arrows — everything from target practice to 3D courses and even some hunting — and not a single tip has loosened or come out. No spinning issues, no wobble, just consistent performance shot after shot. If you’re looking for a reliable, high-quality hot melt for your arrows, this is it. Bohning nailed it with the Cool Flex formula. Highly recommend!

My daughter's arrows were starting to have their tips back out. I had never repaired arrows before but after a few minutes watching youtube I was able to remove the tips, apply the glue, and reinstall the tips. Based on suggestions from the video I dunked the arrow tip into a tin of cool water after replacing the tip. This caused the glue to dry almost instantly, avoiding any issues with drying time or stickiness. So far, this seems to be holding quite well and they look good. Doing a half dozen arrows barely made a dent in this stick of glue. I'll get years of use out of this, it's very cheap per use.

This stuff rules. I wanted to experiment with insert weights and not be permanently stuck, so I tried some Gold Tip 50grain with this adhesive. Super easy to install, and they are holding solid through much target practice and shots on game. Probably will stay with this on the next custom arrow builds as well.

Did not know this was a thing - cool find. Utilized to bond an old chisel head to a new cedar handle that sanded from a branch. Have used a few times and has held bond without issue. Unknown how would hold up to torque motion since this is a chisel...but I'd be willing to try. Must keep the package for the guidance on heating and resetting. Application went well by using a portable propane torch to heat the metal chisel and the cool flex melted right in the female fitting. (Of course I had dry-fit the cedar handle to ensure fit, first). Held the new handle in place for half a minute to allow cool down and bonding and, abra cadbra - a revised chisel. I would recommend this cool-flex product.

Like it for using on threads of field points and broad heads but tried it on inserts and it did not hold, insert pulled out of my carbon arrow when I pulled it from a bag target. I do not secure my nocks so my only use for it is with threads on points and for that it works very well

Good product as advertised

This is my favorite insert glue. Holds very strong but you don't have to destroy carbon shafts if you need to remove or adjust an insert. Other glues either just don't hold or they require you to use extreme temps to remove the inserts, which is fine for aluminum but dangerous for carbon shafts, which is all I shoot! I've lost inserts and collars to foam targets using other glues, but I haven't lost any while using this stuff! It seems to stay softer than other glues, which I believe helps it retain its stickiness as well. And the blue color makes it easier to see the coverage you're getting on the insert. The clear or amber stuff doesn't do as good of a job staying visible on the shiny insert.

Great product from the only name in the archery hot-melt business! I’ve used regular Fer-L-tite for decades and rarely a failure, but this low temp version is great for carbon and aluminum arrow inserts! I use the regular version for wood arrows only. DONT USE HI TEMP ULTRA FAST CURING SUPER GLUE TYPE PRODUCTS FOR CARBON ARROW INSERTS! I learned that the hard way. It requires too much heat and will ruin the shaft trying to extract that stuff. This is the BEST CHOICE!

Habe verschiedene Kleber getestet um meine Pfeilspitzen einzukleben. Dieser hier ist meiner Meinung nach der Beste dafür geeignete. Mit Feuerzeug erhitzt, kann der Kleben soweit verflüssigt werden, dass man damit (zwar mit ein wenig Kleckerei) die Inlets für die Spitzen ordentlich einkleben kann. Einmal den Bogen raus, klappt das mittlerweile ganz leicht, schnell und gut.

Glu chaude idéale pour remplacer les anneaux d'une canne a pêche. Il ne fille pas et reste bien mou pendant qu'il est chaud. Facile a travailler proprement et une fois froid , c'est résistant. Idéal pour les scions en carbone

Muy buen producto lo recomiendo más que el que es color café este enfría rápido, dura menos tiempo caliente tu eje

Facile à utiliser, colle bien et surtout décolle bien avec de l'eau chaude.

Va muy bien, es muy recomendable