SoloWIT Replacement Ear Pads Cushions for Beats Studio 2.0 & 3 Wired/Wireless OVER-EAR Headphones, Earpads with Soft Protein Leather, Noise Isolation Memory Foam (Titanium)

I bought these and was a bit sceptical about how they would fit and look. I was also a bit dubious about how easy it would be to remove the old ones and fir the new ones. It took a bit of effort to remove the old ones but the tool supplied made it quite easy in the end. The instructions were clear and easy to undertand. Fitting of the new pads was quite straight forward as well. Removing the coverings for the sticky tape you need nails for. Just making sure that the new pads lined up properly before pressing down hard on them to secure them. They are a bit bigger then the originals which makes them more comfortable in my opinion. My headphones look like new and I was going to buy a new set until I came across these white replacement pads. I also bought a set of blue pads to go with my other pair where the pads were wearing out and it was much easier to fit the second set of pads as I knew what I was doing this time around. So both headphones have new pads and all down in 15 minutes. 5 minutes of this was reading the instructions several times so that I did not make a mistake. I highly recommend these pads and will be buying them again if my other headphones come to need them (I have 4 other pairs of Studio 2 headphones). Edit 20/12/23 I have bought a few more of these replacement pads for my headphones. The latest set being the red and black ones. All of them are still in perfect working order and the new pads are showing no signs of deterioration after all this time. So they are better than the original. One observation is that with the latest headphones I had to remove the remaining ring and speaker grill with a screwdriver which I did not have to do for the earlier headphones. So Beats have changed the design over the years. Took me a few minutes to figure it out but I got there in the end. Still highly recommended.

Easy instructions and package came with tool to help release the ear plads that were to be replaced. I took care to make sure the surface was clean, especially from glue from the old pads and used alcohol wipes for this. The new pads were then installed easily and feel very comfortable.

Perfect fit and a great replacement for originals. Easy to fit and excellent value.

I bought these Earpad replacements for my Beats Studio 3's of which come 24 December 2019 will be two years old. As most of you are aware of owning on/over-ear headphones, no matter how well you take care of them (mine always go back in their case when not in use) the earpads are always the first thing to go. You'll also be aware that Beats aren't the cheapest Headphones out there so the worry of watching my pads degrade overtime was an awful feeling!!! However, SoloWit came to the rescue with these beauties. The pads arrived in good time and look fantastic. In fact, to the untrained eye (assuming you match your stock colour) you can't tell them apart from the factory pads that ship with the Beats themselves! I've had them for at least 10 days no, I'm a heavy user and they still look as good as they did from day one. My only grumble would be that the tool you get to install them (nice touch) didn't quite cut it for me when it came to breaking the old adhesive. In the end, I just used a standard cutlery knife but the fact they give you spare adhesive too is a redeeming factor. Aside from this installation would have been 5 stars but it did take me a couple of tries to line the pads up correctly. Then again that could just be user error. As for the Adhesion, I'm giving this 4 stars as they seem solid but of course, only time and continuous use will tell for sure. However, based on the price and my current experience. I would be happy to get at least 6 months out of these pads and assuming the price doesn't skyrocket, I would happily buy additional replacements from this company again. Brilliant product!!

These are so easy to change over and they look and feel great. They really fit snugly thus keeping the noise cancellation working well. Thicker than the stock ones so that’s an improvement

Great product - clear instructions on how to remove old ear cups and install these. Very impressed with them

Not an easy job to remove the old ones. I gave up on the plastic triangle provided and used a thing on my pen-knife I've never had a use for - i think it is designed for removing stones from horses hooves but - hey, I've never fancied using a pen-knife for that - but now I know that its really for removing ear-pads from my Beats. I found the hard an unexpected bit was the black plastic shim between the pad and the earphones which was stuck so strongly onto the headphones - and i just wasn't sure if it had to come off - or not. I was super nervous about whether I was removing the pads or breaking the headphones. No insight in the instructions. Getting back to the point: un-peeling the red plastic off the new pads actually pulled some of the sticky off as well - which I'm pretty sure shouldn't have happened. Managed to get it all back on but it was a fiddle and with a little bit of pressure it all worked out fine. Unfortunately I assumed the foam over the fabric in the middle should be removed - as it wasn't on the old one's. That was a fiddle as well - not sure why the foam was there but on reflection i suppose it had a purpose. Now I keep wondering - am I missing something in my life because i removed that foam? In the end it all fits and sticks nicely ands I am very pleased with the results. So, great outcome. Thankyou. In summary: Great product BUT it would be super helpful if you updated the instructions - its not like one changes the pads on earphones very often and if you haven't done it before, it is a bit of a mystery about which bits to remove, and which not...... better instructions please! A link to an on-line video explaining it all?

GREAT FIT AND EASY TO INSTALL

Top voor studio 3 beats

Easy application and great easy fix to sustain the lifespan of the headphones and refresh them. Yet to notice any imperfections with the product, seem to be flawless so far

Kurzbewertung und Montagehilfe: SoloWIT Ersatz-Ohrpolster für Beats Studio 2 & Studio 3 Was es ist - Austausch-Polsterpaar für Beats Studio 2.0 und Studio 3 (Over‑Ear), nicht passend für Solo/EP/Pro oder Studio 1. - Meist Kunstleder („Protein Leather“) mit Memory‑Schaum, oft inkl. Staubschutzgewebe über dem Treiber. Klebemontage, teils mit Zusatz‑Fixierlaschen. Stärken - Günstige, passgenaue Alternative zu OEM‑Pads; guter Komfort und Abdichtung, ANC‑Leistung bleibt bei sauberer Montage nahe Original. - Verschiedene Farben/Nahtdesigns verfügbar. - Häufig mit 3M‑Kleberingen vormontiert; Einbau in 10–20 Minuten. Schwächen - Haltbarkeit Kunstleder abhängig von Schweiß/Hitze; kann nach 12–24 Monaten reißen. OEM meist etwas langlebiger. - Kleber fordert saubere Vorbereitung; bei Wärme/Feuchtigkeit kann sich ein schlecht gereinigter Sitz lösen. - Velours‑Varianten (falls angeboten) verändern Klang (weniger Bass durch geringere Abdichtung). Lieferumfang (typisch, setabhängig prüfen) - 2 Ohrpolster, Kleberinge (vormontiert oder separat), evtl. Kunststoffhebel/Alkoholtuch, Anleitung. Einbau – Schritte für festen Sitz 1) Alte Pads entfernen: Polster ringsum abziehen; Kleberreste vollständig vom Kunststoffring am Kopfhörer entfernen. 2) Reinigen: Klebefläche mit 70–90 % Isopropylalkohol säubern, trocknen lassen. Je sauberer, desto besser hält’s. 3) Ausrichten: Links/Rechts prüfen; Naht meist nach unten/hinten. Trocken anlegen, Passung merken. 4) Kleber aktivieren: Schutzfolie abziehen. Optional Klebering und Auflagefläche leicht mit Föhn anwärmen (handwarm), erhöht Anfangshaftung. 5) Aufpressen: Pad sorgfältig ausrichten, umlaufend kräftig 30–60 s andrücken; dann noch 2–3 Minuten mit Druck halten. 6) Aushärten: 12–24 h nicht belasten, damit der Kleber vollständig bindet. Tipps - Achten Sie darauf, dass das feine Lautsprecher‑Gewebe nicht verrutscht/gefaltet wird und keine Öffnungen/Ports verdeckt. - Für schweißintensive Nutzung dünn mit pflegendem Tuch reinigen; keine aggressiven Reiniger/Alkohol auf dem Kunstleder. - Wenn ein Pad sich löst: Fläche erneut gründlich entfetten und einen neuen 3M‑Ring verwenden. Pro - Gute Passform, Komfort und Abdichtung zum fairen Preis - Einfache DIY‑Montage mit vormontierten Kleberingen - Erhält Klang/ANC nahe am Original (bei dichter Montage) Contra - Kunstleder-Abnutzung über Zeit, besonders bei Hitze/Schweiß - Klebemontage verzeiht keine schlecht gereinigten Flächen - Nicht für andere Beats‑Modelle passend Fazit Preiswerte, solide Ersatz‑Ohrpolster für Beats Studio 2/3. Wenn Sie die Klebeflächen gründlich vorbereiten und die Pads sorgfältig ausrichten/andrücken, erhalten Sie Komfort und Klang sehr nahe am Original. Für maximale Langlebigkeit OEM‑Pads erwägen; für gutes Preis‑/Leistungsverhältnis sind SoloWIT‑Pads eine empfehlenswerte Wahl.

We got these Beats replacement ear pads for our headphones and they worked out great. They came with detailed instructions that showed how to remove the damaged ones. It took a little bit of work but they came off clean. I prepared the area with alcohol and when it was dry I removed the sticker on the new ones. I pressed them in and rather than put them on a book to set, I just wore them. They sound amazing and over all the install was easy. It feels like we have a new set of headphones. I would recommend these if your padding is degrading or if they were damaged. Very glad we got them.

Funcionan perfectamente y ha sido un poco dificil quitar los antiguos, sobre todo por quitar los antiguos de los beats (no es culpa del producto, pero aviso). El sonido igual y son igual de comodos.