NeatiEase Magnetic Window Screen Size Up to 72 Inchx 48 Inch Max - DIY Screen Window with Full Frame Magnetic Strip Easy Installation (White)

I DIDN'T USE IT ON A SCREEN. I USED IT TO PROTECT A DRAIN I PUT IN THE BOTTOM OF A CATTLE WATER TROUGH THAT I WAS CONVERTING TO A PLANTER. DIDN'T WANT CRITTERS GETTING IN TO EAT MY BULBS AND DIDN'T WANT THE DIRT TO WASH OUT WITH THE EXTRA WATER AND THIS WORKS GREAT. STUCK TO INSIDE OF THE PLANTER AND IS HOLDING UP WELL. EASY TO CT WITH THE SCISSORS THAT COME WITH IT. ONLY DRAW BACK IS IT CAN BE TRICKY TO TAKE THE BACKING OF WITHOUT ALSO REMOVING THE ADHESIVE AT TIMES. WOULD RECOMMEND

So $35.00 seemed a lot for one screen (I have 3 windows that need screens) so I decided to give it a try to see if it worked. The magnetic strip is 1/2" wide, which is exactly the width of my frame. I sanded the frame and wiped it clean to get a good grip. The magnets seem to be pretty magnet-y (screen stayed in place). The instructions were a little confusing at first (the print and illustrations are VERY tiny, and there's not much detail) but I figured it out eventually. It takes a little bit of trial and error to get the screen in place and taut (it's not perfect but it's good enough), but I was able to peel the screen off and re-position it successfully. The screen feels kind of floppy so I don't think I'll be removing it more than necessary. I put it up yesterday and I'm not touching it for two days to give the adhesive a chance to cure before I put any strain on it - I'll report back after I've lifted it up a couple of times. The most confusing part was putting the corner pieces on the screen - the instructions say to peel off the protective film and stick the corners into place on the plastic strip; however, there is no sticky tape on the backs of the corners, so there's nothing to hold the corners on. I bought some heavy duty double-sided tape to put inside the corner pieces, but it's kind of thick so it's not allowing the corners to fit tightly with the plastic strip. I feel like I'm missing something here, but the instructions are not clear enough for me to figure it out. I'm going to reach out to the manufacturer to see if the sticky tape is missing on my kit, and report back. Packaged well, arrived on time. On the whole, this is not a perfect solution, but it is a pretty good solution for weird old fashioned windows that need screens!

Instructions could be more clear specific to the corner clips. Otherwise, easy install & works great.

Would not recommend. It installed just fine. I questioned the quality of materials and durability and soon as I opened the package. Followed the detailed instructions but as I was putting it together I knew it was going to cause issues but I went with it hoping for the best. Adhesive is not strong enough to hold up. After a few hours I heard it colapse off of the window. I pulled the formed frame off the magnetic strip, layer it flat and put some heavy books to weigh it down and hopefully seal it. After a day I figured it was going to be as good as it would get so I put it back into place on the magnetic strip and again, collapsed after a few hours. It was a small window as well, so I can’t imagine what it would be like to try and do a larger window. Sadly will have to find something better.

So the same story probably goes for everyone, "We needed window screens to keep dust out" I bought these screens over 1 month ago, they have been in place for over 2 weeks and this is my review to shed some light to future buyers before buying. Pros: Its a window screen, it does the job, and its fairly simple and adjustable. But this review is specifically for the struggles I had with this product, starting with the installation. -- Installation -- : It seems rather easy on paper, but unless your window is in the middle of a wall without any complicated surroundings, then the installation is not gonna be easy, In my particular case my windows are at the corners of my room and I have furniture in front, installing these as 1 guy was not simple, specially due to the adhesive problem I will be talking about later. The instruction that come with the product are not clear enough, I had to look up a review here to understand completely how the installation works. For anyone struggling or curious: - You first place the magnets on the wall with the adhesive part. - Then place same sized magnet strips over the magnet strips that are already adhesive to the wall. -- Adhesive problem -- Part of the installation requires you to place the Screen material over the adhesives that the magnetic strips bring with them. The problem is that these Adhesives do not hold alone, this was my main issue while installing these, it felt impossible to hold the screen with just the adhesives while I was trying to place the plastic strips at the end. I recommend having someone there to help you hold the screens up from falling while you do the final steps of installation. After my screens were installed, you can see from the pictures that the adhesives don't last long, there work great sticking to a flat dry surface, but holding the screen and the strips it just doesn't work as well, I had to use double face tape to give it an extra grip and make the strips and screen stay pasted together. Kinda defeats the purpose if it doesn't hold itself on its own. EDIT!! (3 months later) The glue that comes with the magnetic/plastic strips does not hold well, I've had to add extra support to them with double sided tape.

Absolutely 10 out of 10! One of the things that I love to do is open my back window at the end of the day when it starts cooling off instead of using the air conditioner. I just like the idea of having that cool breeze coming through. But when you're in the south, it's very difficult to do that because of all the bugs like mosquitoes and flies and lord knows what that I just don't want inside of my RV home. In transparency, I actually bought this in April of last year, but didn't install it because I was afraid the process wpuld be too complicated (it was actually super simple and fast... but I've been excited to put it on for a very long time. Now that I put it on, I wish I would have done it sooner... seriously, one Netflix episode and it's done, it was so easy. No measuring, really not even a measuring tape. The only thing that I needed of my own was a pair of scissors. I absolutely love it! I've had this RV for ten years, and I wish I would have done this ten years ago. I would have been able to enjoy the RV in a whole different way. So if you like the idea of opening your back window and to have a breeze come through.... norf you have any windows that need a screen, but not a permanent screen, this is definitely the most perfect solution that i've been able to find!

Let me tell you, if you want an easy screen installation " this is it" I'm so happy I found this product...I purchased my home with 0 screens and I was so frustrated until I found this. The screen itself is beautiful, the screen itself is durable, the color is perfect not dark like some I've seen. Then to top it off after you install ' they can be removed easily to clean the windows and put back if you need to take it off for an air-conditioning unit. Great for porches and odd shaped windows. You can also replace door screen by doing two-, top and bottom. You won't be sorry you got this...I have crank windows and I was able to cut the magnets strip around the crank! So cool! I fully recommend this product.

I installed this around my son's window because the fram of the old screen was broken. After following the instructions to the best the horrible pictures showed it was not that difficult. My son's window is not flat with the house so it was a little more difficult than the video shows. I did find that it would have been better to not put it to the outside edge of the window seal even they dont tell you that part. I did exactly that I went with the outside of the window seal so that it would cover completely but doing this i found that after putting the screen on the plastic outside cover did not fit perfectly due to the corner plastic covers stick beyond the flush magnet so it left me with not having perfectly straight setup due to the corners. They really should point this out. Everything was easy to cut and I would say the product screen and magnet was good but due to it not giving this information I dont believe this will last very long. I would recommend to buy as long as you take into account that the corners stick out a little beyond the magnetic so dont place on far outside of the frame.

So far, so good! The installation was straight forward and the magnet tape is really strong. It's a great option as a renter to keep the bugs out. I put down a layer of painter's tape on the window frame before applying the magnet tape to make removal easier if/when I move.

Para el dormitorio decidí poner una mosquitera con cierre magnético, para que fuera más fácil abrir y cerrar la ventana. La verdad es que se mantiene bien y es fácil de utilizar. El mayor inconveniente que le veo es que se tarda un poco en colocarla y la idea funciona bien si es un bajo o puedes acceder con una escalera hasta la ventana. En mi caso no tenía esa posibilidad y tuve que hacer malabares para colocarla en el marco de la ventana entre la persiana y el cristal, porque dentro de la habitación quedaba muy fea.

Je n'ai aucune aptitude au bricolage et ça m'a pris 45min. Un peu fastidieux mais pas compliqué. Une fois installé c'est parfait. La moustiquaire reste en place et peut facilement être enlevée pour ouvrir le velux/fenêtre. Absolument impossible pour les insectes de rentrer. J'en avais commandé 2, j'en ai commandé un de plus pour être sûr de couvrir tous mes velux. J'avais aussi acheter des modèles plus simples avec juste qql attaches magnétiques, vraiment pas recommandé, c'est mieux d'investir un peu et de prendre ça.

Overall, it is decent, not flawless but it gets the job done. It looks clean at least. I did lay the plastic edging out on the floor and put some books on the ends to flatten them and had to roll the ends the opposite way on itself. Still a little issue with one side curling and lifting. I'll have to see if I can bend it back a bit. Not the easiest installation but not terribly difficult either, just take your time. Seems to stick well, strong enough magnet. Will update is any issues arise.

Everything was going smoothly and the design is easy and smart. The only reason I scored it lower was because when I got to the plastic strip part, the adhesive is so melted and thick, the strip won’t peel off. So I can’t stick it on. Will have to glue on which is stupid. Otherwise a good invention.