PLG6C

Got here quickly, kudos to Amazon and fed ex for the super fast delivery I ordered it last Friday evening and received it today, only 2 business days!! Amazon even sent my phone a text message once they confirmed that it had been delivered. These speakers are not the easiest thing to install so if you do not have any experience installing stereo equipment I would push you towards a standard set of 3 or 4 way speakers.. if you know what your doing these speakers are pretty straight forward if you have any knowledge of stereo systems or even common sense. the difficult part is getting it to look good and hide the crossovers (assuming you want to hide them)... now to the product itself. When I opened the box it smelled of Chinese plastic.. these are made in china like everything else. but their build quality is fair/good speakers feel pretty rigid and I see no problems with them holding up for years under normal use.. but on those hot summer days I would be careful not to crank it up too much the plastic seems to be the type that could warp under high heat and movement... unfortunately there is no room in my garage so my install was stuck to the outdoors and being April in Oregon my install was cut to a halt after the first speaker due to me getting soaked in the rain (I have a small car.. not much room to install door speakers with the doors closed) Anyway the side I did looks clean and professionally done and has the sound of a more expensive set these speakers perform at the same level of a 70-80$ pair of speakers from brands like sony, pioneer or kenwood.. keep in mind they are no infinity or kicker but do sound very good and are just about the best bang for the buck you can get!!! Ohh and to the people complaining about the wire that comes with the speakers... the wire that comes with it is thicker than 90% of cars stock audio wiring.. so unless you plan on replacing ALL the audio wire putting larger gauge wire to the speakers is a complete and total waste not to mention these are only ~50 watt RMS speakers you don't need 8 gauge subwoofer wiring to make them work the smaller wire works just fine and they give you more than enough to suffice. I'm very impressed with the improvement of the overall sound quality of my system with only one speaker.. the tweeters are loud and have a good range and can get very loud if you set them up for it and the woofers make a good deal of bass it wont replace a sub but for someone who listens to less bassy music it will do well.... I'm excited to install the other speaker and am anxiously awaiting my pyle audio 4 way speakers for the rear!!!! kudos pyle you guys have come a long way in the past years. So far I'd recommend them to anyone. *UPDATE* Got them both installed and took out my old rotted out rear speakers and these things sound awesome... excellent bass.. far more than expected. At half volume they can vibrate my rear view mirrors to the point they distort and the tweeters hit every high you throw at them... this set is a very good buy!!!

I discovered these Pyle speakers after the left side of my 2012 Ford Fiesta hatch's expensive 6.5 in."Focal" mid bass speakers suddenly stopped working with only 13000 miles on the car! Strangely, the "Focal" tweeters in the front doors still functioned, so I left them alone and didn't install the supplied "Pyle" tweeters. Because I'm old, and hardly EVER 'bump" the bass, I took my ride back to where I had bought them and the stereo and had them installed at "Car Toys". After complaining I was told that the warranty had expired. "What? But sir, I also paid for the extended warranty!" "WHAT? ONLY FOR ONE EXTRA YEAR, AND IT EXPIRED THREE MONTHS AGO!? DAMN." Well, I was pretty hot over those $$$ 6.5 in. "Focal" speakers! OK, so the expensive speakers didn't last any longer than the cheap ones. NO MORE FOCAL speakers! I searched for a set of speakers that had more RMS watt capacity for my JLA 700 watt 5 channel amp. I settled on these "Pyle's and bought TWO sets of the "Plye" PLG6C speakers. Only one side had stopped working, but I wanted my ride to have a matched set all around, so I removed the surviving "Focal" set on the pass side, and installed a new "Pyle" speaker on the speaker rings in each door that I had left in place from the previous Focal installation. My amp has built in crossovers, so I didn't install the supplied "Pyle" crossovers. After I installed my four new "Pyle PLG6C"s", I turned the stereo on, and I tested them. LOUDLY. After thoroughly satisfying myself with their operation, I ordered my third set of the PLG6C speakers this Easter weekend! 5 STARS from me people!!

Amazing speakers though. The tack that comes with the tweeters is a little weak and won't hold up in a truck as I've found out. But overall sound quality and installation mounting all that is pretty easy. They sound really good. It's just those tweeters are hard to mount

I like these A LOT, but they are not perfect. For the money they are hard to beat. I replaced the component speakers in my 2005 GMC Yukon with the Pyle 2-Way Component system. If you are handy, you can install them, but this is not a drop in installation. Opening the package, the crossovers look very nice. MAKE SURE TO USE THE CROSSOVERS! Otherwise you will get to much midrange and blow the tweeters. In the GMC, I removed the door panels, removed the old woofers. The old woofers have integrated custom mounting hardware, but the 6.5" Pyle woofers fit perfectly. I used self tapping sheet metal screws to mount the speakers. I wired the crossover and mounted it to the inside of the door PRIOR to mounting the woofer. Since GM runs the stock woofer at full range you can use those wires for the crossover input (see polarity chart for GMC below). MAKE sure the polarity is correct or one speaker will simply cancel out the bass of the other. Just because they work does not mean the wiring is correct. I then removed the tweeter from the door. I cracked the two small tabs holding the tweeter magnet and pried the magnet from the front of the tweeter. I then mounted the Pyle tweeters to the front of the old tweeter and remounted it in the door. Note: this will destroy the old tweeters. I mounted everything back and they sounded really good. Bass is better than the stock system, high end is MUCH BETTER. I can almost run the EQ flat on my stereo and get nice sound. They play nice and loud through my Alpine in dash stereo and no external amp. With a subwoofer it would be a pretty awesome system as they tend to buzz a bit at very high levels with lots of bass. My guess is they go down to about 50 Hz or so. They will not THUMP but you will crystal clear highs, nice midrange and some nice bass at moderate levels Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green

Second update. They sounded good at first but now sound horrible. One of the tweeters blew under a 30w rms amp and one crossover is only filtering low end so my mid bass is not coming through. Totally garbage. Spend 5 more bucks and buy the pioneers. Updated. I would bump up the rating for the sound quality but almost want to take a star off for company support. I contacted them and have heard nothing back. I ended up fabricating the parts I needed to mount the tweeters and got everything installed. I'm running a bi-amp system with the components and a sub woofer. For the price of these speakers the sound quality is incredible. Im going to add some bass blockers between my amp and the cross over because they still let a bit too much low end through but thats not a big deal. You cant beat the sound quality for this price unless you build them yourself. Customer support: So far disappointed and they are not even installed. First I didnt recieve the surface mounting clip. Next the tweeters came assembled in the flush mount configuration and following the directions to change the mounting setup only made me feel like I was going to break the tweeters. They never came apart to switch configurations. Then the support site just kept looping me back to the same page once I had entered all the information they wanted. The wires for the crossover just slide into it and screw down. I had expected a y connection terminal or a ring connection terminal which I added myself. This rating may go up if the support people get back to me or if I get the tweeters mounted the way I want. Rating may get better if they sound half way decent. Will update next week after giving support a couple days to get back to me.

Fit perfectly in place of the factory speakers of the 2002 Chevy 1500 I installed them in. Definitely compatible to factory speakers but not as good as the blown pioneer speakers I replaced. Sound quality is ok until you try to crank them up and then they get crackly and mimic a blown speaker which was surprising considering they are a 300 watt speaker. The clarity of the tweeters are clear and the vocals sound good but the woofers are a little overrated for their performance. Setup was easy enough with some modifications to mount the tweeters. They make a great speaker if you’re looking for just to make some noise and replace a factory speaker but they won’t win you no sound competition.

Good value

Good speakers

Great for the price. If you're using a factory head unit, it may not have the power to run these though. I'm using a cheap aftermarket head unit now with about 50 watts per channel and they sound pretty good. When my amp comes in they will sound even better! If you've never installed speakers in your car before, look it up first to avoid any headaches during the install.

Wery happy with them amazing sound easy installation

セールにて2ペア購入 前評判は二極していたので迷いましたが値段以上にいい音ですね いわゆるドンシャリが好きならいいと思います ミッドウーファーのバスドラとベース、ツイーターのシンバルあたりの音がそれぞれ強調したような音になります そのためボーカルやギターなどの中音重視の人には合わないかも？です ケーブルもネットワークも付属ので問題なく使えました

Good product, Thanks to the seller also maker of such a good one, not only the low signal, the crossover nicely split the high and low in to perfect sound distribution.

لا تستحق ورديئة