Probus Qualcomm Quick Charge 3.0 Charging Hub with 6 USB Ports 12A/60W Output Black (HDS-HDD10T)

Probus Charging Hub is an excellent charging hub for the price! Info: Probus Charging Hub is a rebranded version of the generic HDS-HDD10T charger. HDS-HDD10T can be found all over the internet under different company names. I was not able to find this Probus charger in Qualcomm’s charger list, but I was able to find HDS-HDD10T mentioned in Quick Charge 2.0 charger list. HDS-HDD10T is not certified as Quick Charge 3.0 charger. I hope this is a delay in adding more chargers to the list. I bought this product only because HDS-HDD10T was on the Qualcomm’s list. Also, most HDS-HDD10Ts found on the internet are QC2.0 and not QC3.0. Packaging/Contents: The product was excellent packed! Kudos to Amazon and seller! The package included the charging hub, stand, power cable and user manual. Built Quality: Probus Charging Hub is an extremely well-built product. It feels heavy, like a quality product should. The materials used feel premium. Certifications: The product is BIS certified. It conforms to IS 13252 (Part 1). It also conforms to IEC 60950-1. The product also conforms to FCC, CE and RoHS standards. Features: It has 6 USB ports of which 2 are Quick Charge 3.0 enabled. Each port can supply at maximum of 2.4A. The total output is capped at 60W. It has a Blue LED indicator that lights up when mains power supply is turned on. The charger is compact and hence can be easily carried around while travelling! Thoughts: The product tends to get very hot while charging three or more devices. Despite getting very hot, it works like it should! I hope the temperature protection and other safety circuits are in order! Given how hot it gets, I’m skeptical about its longevity. Another thing that concerns me is seller/brand itself. In case of a product failure, would they be reachable and would they honour the warranty? I hope so! The product comes with a 3-pin power adapter, but the other end which connects to the charger has only 2 connections and the Earth pin is not connected. Well, there's a double square symbol [Class II Appliance] on the product (near the certification symbols) means the product has two layers of insulation and does not require a ground connection! Final Thoughts: Probus HDS-HDD10T is an excellent charging hub for its price. It well-built and feature rich!

So, this review is after buying my 2nd unit. My 1st unit died but it was a fault on my side. There was a short circuit while my inverter was being shifted to another location in my home. Lost this charger and a Antec SMPS (PC was shutdown but mains was connected). Always disconnect all electrical devices when working on your power supply, lesson learnt. So, I bought my 1st unit on 23 October 2019, and it's almost to a exact year now. I've used this charger with 2 different Fast Wireless chargers, Samsung S9, S6 Edge, S7, M21, M31 and various other phones and tablets. Big family! All the ports including QC ones have always worked as advertised. The only problems I had was when using the magnetic connector cables but I put that down to cable quality, they sometimes didn't fast charge even on Samsung original chargers. Seeing some of the few complaints of no fast charging, unless there was a manufacturing defect in those particular units, I would lay the blame on bad cables or phones not supporting QC. TLDR: highly recommended.

Pros: Compact size. Stand a good addition, but not for traveling. Well built. Doesn't heat up much even with continuous use. Has a PD charger. Cons: compact size means the ports are cramped and removing or inserting the in-between cables are fiddly. 2 PD ports available but only one has fast charging and can't fast charge simultaneously from both ports. If travelling is the main use then go for something smaller with 2 ports. Fast charging is not like ultra fast, my vivo x60 p+ takes 30 minutes from 5% to 30% (brand charger does this in under 10 minutes.

Well to my knowledge Probus is the only brand in India which provides Charging hub with two dedicated Qualcomm Quick Charge 3.0 ports, which is Infact very necessary for me as I own two compatible devices. Also Other basic ports are also good in delivering power. Con is that it get too warm to touch sometimes, but only when every port is being used and it is also understandable as power electronics do get warm. Anyways good product and recommended to buy if you have lots of devices and travel a lot. P.S it also comes with handy stand which doubles up as your phone stand for movie viewing etc.

This can easily compete with mainstream mobile companies like MI, Oneplus, Samsung etc. The charger is very premium quality, compact in size and has a very useful stand where one could hold the mobile while charging. Both the quick charge and regular charging are working properly.

It doesn’t charge fast as they mentioned in their description. I used the charger tester app to check the charging it is showing the lowest rating when i connected to their Quick Charge 3.0 Qi port , screenshot is attached with this review. Not at all worth for your money. only can be used for multiple charging even that is worst the product it self is heating like a hot pan if we connect 2 or more device.

Great product. Work as described. No issues till now. No hitting issues. Very convenient to charge multiple USB device at the same time. I tested all the ports simultaneously and it works It requires external power. It doesn’t have USB C port for charging

I've been using this product so far, for around 10 months and after using a while it i got a lil bit electric shock on touching the cable pin from outside, but it didn't catch my attention till now, recently i came to know that it is a fault in it 😂, so yeah I'd applied for warranty Claim, so better watch if you purchase this.Otherwise the product is well built, charging speed is awesome, and yeah it was a fine purchase till now, I hope they either repair or replace this.