Deliver to Colombia
IFor best experience Get the App
Full description not available
P**D
Great replacement controller
I used this controller to replace my Schwinn Town & Country Trikes; CON61 BRUSHLESS CONTROLLER 36V 250W Over-current 14.5A LVC:28VSensorless and sensored compatible3.5 in x 2 in x 1.125 in.89 mm X 51 mm x 29 mm(pictured)I have a basic setup and only use the throttle control.Although the low voltage cutoff on this unit is higher. The performance is a bit different then the CON61. For instance the low end output appears to have a much longer ramp up time, so I'm not jumping off the line as fast, however this is a good thing as now I probably am using less battery, extending my range. My Max speed on flats has increased from around 15 mph to 20 mph, probably because of a higher current limit setting and this being a 350 Watt rather than a 250 Watt. Hopefully I will not burn out the motor, but I think it's fine. The small size of this unit made it the perfect choice because anything larger simply would not fit in the already tight housing.If you are wanting to get the wiring diagram request it before the unit gets to you as they don't include a copy. I upload my copy but not sure if the quality is there.If you are substituting a CON61, most of the connectors match but not all of them so be prepared to cut and solder, or crimp the old ones onto this new one.
M**.
Great value in a 3-phase controller!
This controller lacks documentation, but a bit of searching online resulted in a compatible set of documents. One nice feature of this controller is it's ability to self-learn the order of the hall sensors!
A**.
Its good, but needs instructions.
It works great, however 0 documentation: no manual, no data shit, no noting.In the end pics on Amazon helps, not to hard to figure it out. Lighting output can be useful but ut doesn't hav that. Runs my 800w motor with no problem. It even runs the motor without motor position sensors.
2**O
Not for scooter.
Good but clunks when using on scooter. Works fine in ebike though. Don't buy if you're using in a scooter.
S**8
No docs, pics don’t match
Wiring schematic on amazon doesn’t match the controller you get. No documentation included. Sending back and waiting for a different one from China.
S**N
No instructions
Did not come with wiring schematics
M**M
Solid
Works fine for my application
R**N
Awesome seller!
Fast delivery and great product!
J**9
Works OK But Cannot Have Throttle And PAS
Will work on a motor that doesnt have hall sensors as well as one with. The so called PAS connector does not work!So if you have throttle and PAS then you can only use one of them!Spoke with the supplier about so called PAS and all you get is crap out of them as they no nothing about the product as they sell handbags and all other sorts of crap as well!So called PAS connector has +5V/0V/and a +4.75v lines. For most magnetic/hall sensors it should be +5v/0V and the sensor line that goes from 0v-5V as you pedal. This is how the throttle connector works.
N**O
It's a 250wats, not a 350 like the title says
The title is misleading. It's not a 350w. It's just a 250w
J**S
Atetion
The Instruction is not great and it’s not very helpful should be more pacific thank you
L**S
Perfecto
Me gusto
E**R
Funktioniert
Ich bin kein bezahlter Komentator. Da mal vorab.Also ich habe das Produkt heute erhalten und für den EK16 Second Edition etwas angepasst, da Anschlüsse nicht gleich sind. Die 1. Testfahrt war super. Ich werde die nächsten Tage einen Dauertest machen.Menschen die nicht versiert sind, können schnell Probleme haben. Hier eine kurze Zusammenfassung was es kann:- das grüne Kabel ist für Richtungs- und Testlauf des Rads. Wenn das Rad verkehrt rum fährt, einmal ausstecken und neu anstecken, laufenlassen dann wieder ausgesteckt lassen.- es gibt eine Verbindung für Cruise Control (Tempomat)- PAS Funktion habe ich nicht angesteckt und auch nicht getestet, ich nehme an, dass der Gashebel am Lenker und PAS (Pedal Assisten System) nicht gleichzeitig funktionieren werden.- eine weitere Verbindung ist doppelt ausgeführt für die Bremsen, sowie eins für die LED Vorne und Hinten (habe ich auch noch nicht getestet)Es gibt keinen Display Anschluss! Selbst wenn es sie gäbe, würde ich niemanden anraten selbst wenn der Stecker passen würde ein Display und Controller unterschiedlicher Hersteller zu kaufen. Selbst für den EK16 gibt es baugleiche Displays mit 4 verschiedenen Varianten!
Trustpilot
1 day ago
2 days ago