Comgrow3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA ABS Material, Filament Dehydrator, Spool Holder
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8Thumbnail 9

Comgrow3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA ABS Material, Filament Dehydrator, Spool Holder

4.3/5
Product ID: 400882090
Secure Transaction

Details

  • Brand
    Comgrow
  • Material
    Normal PLA
  • Color
    Transparent
  • Item Weight
    1.5 Kilograms
  • Item Diameter
    1.75
💧Moisture removal
📦Large storage (2 rolls)
🌡️Temp range (40°-50°C)

Description

🛠️ Elevate Your 3D Printing Game with Comgrow!

  • SEALED FOR SUCCESS - Our airtight design ensures your filaments remain dry and ready for action.
  • REAL TIME MONITORING - Stay informed with a 2-inch LCD screen that displays temperature and humidity at a glance.
  • USER FRIENDLY OPERATION - Easily set your desired temperature and drying time with intuitive touch controls.
  • SUPPORT WHEN YOU NEED IT - Our dedicated technical team is just a message away for any troubleshooting needs.
  • MAXIMIZE YOUR FILAMENTS POTENTIAL - Keep your 3D printing materials in pristine condition with our advanced drying technology.

The Comgrow 3D Printer Filament Dryer Box is designed to keep your 3D printing filaments dry and moisture-free, compatible with both 1.75mm and 2.85mm materials. With a spacious interior that accommodates two 1kg spools, adjustable temperature settings, and real-time monitoring, this dryer box ensures optimal filament performance and longevity. Its sealed design and user-friendly interface make it a must-have for any serious 3D printing enthusiast.

Large manufacture image 1Large manufacture image 2Large manufacture image 3
Small manufacture image 1Small manufacture image 2Small manufacture image 3Small manufacture image 4Small manufacture image 5Small manufacture image 6

Specifications

ManufacturerCreality 3D
BrandComgrow
Item Weight3.3 pounds
Package Dimensions11.1 x 10.83 x 7.76 inches
Item model numberAK36WG-1200400J
ColorTransparent
Material TypeNormal PLA
SizePLA
Manufacturer Part NumberAK36WG-1200400J

Reviews

4.3

All from verified purchases

J**B

Made well and works well

This dryer actually looks and feels well made and works great too. Please read the instructions for operation, it's not very intuitive, but not too complex to learn either. Makes a decent seal and can hold moisture out for a few days even off. I like that it displays time, temp and humidity when it's working. No issues holding 2 filament spools with some room to spare on sides, so no issues if you were to use the spool holes to hold filament-ends (sticking out a bit on sides). Has closable feed-holes on top and front if you wanted to feed up/forward while keeping rest of spool dry. I've accidentally dropped it, from about a 30" high (table) onto lush carpet and luckily nothing broke.

T**L

Works - but you need to know HOW it works.

Overall I am pleased, but I want to share how this performs.First off, the design changed a little from the pictures, it now has four holes for filament to feed through. Two on the top , as shown, and now two more on the front. All of the holes have silicone seals to close them off, so this is an improvement.Now for the results of my testing. I put a hygrometer inside the case and graphed the results. The unit dries the filament very slowly, so if you have filament that is very moist, you’ll likely need to run this for days to dry it. I averaged around 0.6 to 0.7% per hour (takes about 4 hours before it starts dropping). So it’s slow and steady, which is not a bad thing. Once you have it fairly dry, it will start absorbing moisture again (even if you don’t open the case).In my tests, once the drying cycle completes, the humidity inside the enclosure will start to gradually increase again. Slower than the drying cycle, but steadily increasing. The case has no openings except for filament holes (plugged for testing) and the joint between the base and lid. The drying is accomplished by heating and a small fan that just circulates the air inside the case (it is not vented to the room). So for the humidity to drop the moisture has to be seeping through the joint between the base and the lid. So when the cycle stops, the reverse starts to occur.Final thoughts: I am not pointing this out as a flaw (I still gave it 5 stars), but rather to help others to understand how the device works/behaves. So now I know that the device will need to be run periodically to maintain the target moisture level in the filament AND that the dryer itself is not a good long term storage box. Once filament is dry and won’t be used for a while, it should be stored in something that is air tight to maintain the proper moisture levels.

J**Y

Works well. No complaints

My first filament dryer i chose because it was cheap. Honestly cant really say much other than i had a transparent filament that was giving me problems. I put it in the dryer for 6 hours and it has printed flawlessly for the entire roll. It works and does it job.

J**Y

Wow good fumes

Thing does it's job nice and dry also great smell! But honestly them buttons are really the biggest downfall. There's not a lot of ummm things there yaknoww like there could be a lot more options or better freaking controls. Only thing missing that 5! Overall pick this thing up I'll buy 5 more definitely harder to recommend

G**S

BUY THIS DRYER!

Was initially underwhelmed by this Filament Dryer, but now that i'v been using it for a while, it has done a remarkable job at drying out all of my PLA and PETG and even silica packets that i recharge in it sometimes. The max temp is 50c, and I know some people say you NEED hotter for PETG, but after using this to dry out many spools of PETG now, I can confidently say that this dryer does the job quite well. Water is water, dry it overnight and it all drys away.Just remember to crack open the lid every now and then to let out the "wet" heated air, and don't leave too big of a gap, iv learned that somewhere between half an inch to less than half is the sweet spot.One thing i'v noticed is that the external power brick also gets quite hot, and i'v been tempted to screw it right onto the dryer, to use some of its heat, but i'm no electrician and im sure they separated the power brick for a good reason.

D**O

Buy it! Helps a lot

Life changing! Now I can print properly thanks to this product

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
$548859

Duties & taxes incl.

Colombiastore
1
Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Comgrow3d Printer Filament Dryer Box Comgrow 3d Filament Storages Keeping | Desertcart Colombia