🌟 Light Up Your Imagination with iSANMATE!
The iSANMATE 3D Printer Filament Bundle offers a unique glow-in-the-dark experience with multicolor options, including green, blue, and blue-green. Each 250g pack features a 1.75 mm diameter filament with a dimensional accuracy of +/- 0.03 mm, ensuring compatibility with most FDM 3D printers. Made from natural materials, this PLA filament is odorless, clog-free, and vacuum sealed for optimal performance.
Manufacturer | iSANMATE |
Brand | iSANMATE |
Item Weight | 1.1 pounds |
Product Dimensions | 3.94 x 0.39 x 0.39 inches |
Item model number | PLA175-Glow-4Color |
Color | Glow Multicolor, Green, Blue and Blue-green |
Material Type | Polylactic Acid |
Manufacturer Part Number | PLA175-Glow-4Color |
E**.
ISANMATE 4 pack matte tri-colors Awesome colors and awesome brand and awesome quality
This iSANMATE 4 pack 250g rolls was a good deal for 4 different colors to print with. And it prints nice and easy the quality is awesome and had no warping and no adhesion problems whatsoever and the colors are amazing and prints smooth I would recommend buying it can’t wait till make some bigger dragons with it but here is some pics of some stuff i printed with it so far awesome brand!!!!!!!
C**Y
~~DRY THE FILAMENT B4 USING~~
Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool"As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well.I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG.I would purchase again. Be sure to dry it first.
R**S
3D Printer Filament, Color Change Rainbow PLA Filament 1.75 mm, 1 KG Spool, PLA Rainbow Multicolor
This filament printed really well. The worst part of some rainbows is that the gradient isn't smooth and looks more stripey than transitional. This filament does not have that problems and has a beautiful smooth transition from one color to the next. The colors are rich and saturated, absolutely nothing negative to say about it. This filament is not rapid color change, so if you like printing dragons like I do, this will give you nice slow transitions without repeating colors. You can still achieve at least 2 colors if you print multiples of a few small prints. We recently bought a Bambu Labs printer and the plastic spool works great in the AMS. I had no issues with adhesion when switching colors with other brand filament within the same print.
S**9
Decent Filament, Cool Surface Texture
Decided to give this stuff a try. I had heard of CF-PLA having adhesion issues. I would say it doesn't stick as good as regular PLA, but stuck well enough to print a Benchy without a brim or raft directly on my PEI Plate heated to 60 degrees. I ran a couple temp towers with it and found that it does not like to bridge well. However, your results may vary, I tried it with a stock Tenlog TL-D3 Pro, which only has 1 sided cooling. Its possible that more cooling could benefit. I did notice it like to curl on steep overhangs, again, maybe something that could be fixed with more tweaking. I plan to keep testing different fan settings and see if I can get it fixed. If I do, I will update my review with my finding. Surface texture was great, love the matte finish. Prints felt very rigid and strong. I was able to put a lot of force on the temp tower before it snapped at a layer line. Filament itself is very brittle. It snaps very easily. I recommend using a direct drive system to help eliminate any snapping issues. This was not due to moisture as some may think. I took it directly out of the vacuum bag and started my tests. Overall, I think this is a good filament, just maybe not for the beginner with a bone stock Ender 3.
T**D
Needs a lot of testing... (Updates below)
This isn't your normal PLA. Not even close. Testing is a must. Temp tower had stringing from 190c to 220c. Had no adhesion on magnetic plate until 200c, and plate was at 60c. When it sticks, it really sticks too. I could only remove the build while the plate was hot. Got a clog mid-print also...luckily it was a short print at only 3 hours and I was there to catch it.Drying didn't help.The one positive is that it does hide print lines very well. No zits or bumps, but there was a ton of stringing that had to be removed.I'll keep testing, hoping to find that magic combo of temp and retraction. But for now, I don't trust this filament.Update: Seller has reached out to assist with my issue. I am hoping that I may have just received a bad batch. It happens. I will update when i hear back. It's good to know that they are listening, that gets a thumbs up from me. Stay tuned :)Update 2: Well, they left me hanging. 5 days with no communication. Lots of pictures were provided, with lots of stringing and bad adhesion on test temp towers and wagon wheels. Of the 2 rolls I used, I found the best prints were at 180c, high retraction, 90% flow rate, 50c bed. But they still produced less than acceptable results.Conclusion: So, I really wished this worked. I like the look of wood prints, but this filament just has too many issues...from clogging, stringing, adhesion, etc. I do see some of the other reviewers saying it worked for them, so my thinking is that I just got a bad batch. To be fair, buyer beware, and I hope you have better luck that I did.
C**N
After hours fun
Glow in the dark anything is so much fun. This package came with 4 unique colors. I was able to print some articulated sharks and they came out great. I then tried a much more challenging print known as a Hueforge. Sometime filaments have troubles with Hueforge because the layers are so thin and the printer has to do a lot of retractions as it moves around. The blue and green spools printed just fine with the Yoda image.Now I just need to buy a UV light to really make these prints pop!The spools came packaged in a square box which and were well sealed. Overall I am very satisfied!
Trustpilot
2 weeks ago
2 months ago