• Formic Pro 2 dose (4 strips) Certified in production of Honey Can be used during honey flow Only use between 50°-85°F/10°-29.5°C. See mor information and Instructions below.

Option One: 14-day Lay two strips, staggering them so they lay flat and across the full width of the lower brood chamber, in the heart of the brood rearing zone, with approximately 2 inches between strips and 4 inches between the ends of the brood chamber and the outer edges of the strips. Follow the Application Options pictogram. Add a honey super with frames at time of application if necessary to provide adequate space for strong colonies to expand, or if a honey flow is expected. It is acceptable to have queen excluders in place. Allow a minimum of one month between applications. Do not mix with other miticides. Option Two: 20-day On Day+0: Lay one strip across the frames in the center of the lower brood chamber, in the heart of the brood rearing zone. Follow the Application Options pictogram. Add a honey super with frames at time of application if necessary to provide adequate space for strong colonies to expand, or if a honey flow is expected. It is acceptable to have queen excluders in place. On Day+10: Remove and replace with a second single strip. The application of the second strip may be delayed if weather conditions at day +10 do not allow for . The second strip must be applied as soon as weather conditions permit to complete . VENTILATION Remove entrance reducers. Bottom board entrances must be full width of the hive, minimum height ½ inch or 1.3cm and fully open for entire . If colonies have permanently reduced entrances, set back the upper brood box by ½ inch or 1.3cm, or insert wedges between the bottom box and the bottom board to create a full entrance. *Close off screen bottom boards for maximum efficacy. Do not consider open screen bottom boards as ‘ventilation’; bees draw in air through the bottom entrance to ventilate the colony. TEMPERATURES Optimal temperatures for Formic Pro are between 50°-85°F/10°-29.5°C.