4 Feet USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 10, 8, 7, XP and Mac

Description

DTECH USB RS485 adapter cable devices with FTDI chipset allows you to connect RS422 or RS485 serial devices to your computer via USB. By taking advantage of the USB bus, the USB/RS485 Serial converter makes it easier than ever to add RS-422 / RS-485 serial ports and serial devices to your system. DTECH Industrial USB to RS 422 / 485 Serial Adaptor Cord is a high quality industrial USB plug and play dongle designed to instantly add a RS485/RS422 port to your PC or Mac system via USB interface. USB to Serial cable RS485 is the ideal solution for connecting industrial devices such as laboratory testing and measuring equipment, monitoring devices, material handling equipment, and many more devices where mission critical applications are required. Specific RS422/RS485 TIA/EIA Standard USB2.0; compatible USB 1.1 Baud rate: 300bps to 921Kbps Indication LED's for Power, TX and RX No IRQs, DMA or required; No IRQ Conflicts Automatic send data control. Auto detection of data speed; Zero delay automatic transmission Automatic hand-shaking protocol supported Built-in static and surge protection up to 600W; 15KV ESD protection (Electro-Static discharge)Serial to USB adapter supports multiple terminals up to 32 RS-485 or RS-422 devicesup to 1200 meters for RS-485/422 end Working modes: asynchronous; point-to-point or point-to-multipoint; 2-line half duplex and 4-line full duplex. Application fields: Factory automation system, Distributed control system, Other 485/422 serial device wireless network, LED INFO display equipments, PLC control and management, SCADA, measuring instruments and monitoring system, CNC management, Medical treatment/medication automation, Building automation, Check on work attendance/ Human resource management. Original Packing Included 1 x DTECH USB to RS-422 RS-485 Adapter Cable 4ftTerminal Board 1 x CD software driver Review: Works great (ignore other people’s comments) - I’m using rs422 to connect to a very old legacy system. The other comments where people say this doesn’t work are wrong. It’s their lack of understanding how computers and electronics work. Firstly, the driver is ftdi. By default this should work plug and play with windows 10+ and Linux. If it doesn’t, just download the correct ftdi driver for your operating system. Second, people saying the signal is too weak and such… ugh, it’s because they don’t have the gnd connected. I get it, the schematics don’t display a common gnd, so people don’t bother. But you need a common gnd on all electronics. It’s how each device can reference voltage! The schematics didn’t display it because it’s common sense. Review: Correcto con respecto al precio - Correcto con respecto al precio