72112 Freeway Blaster LOW Note Horn

I was able to replace the weak OEM horn on my 2016 Nissan Rogue with this new FIAMM 72112 low Note Freeway Blaster horn. Please note you have to replace also the High Note horn with the FIAMM 72102 to have both High/Low tone horns work together in pair. Now we have a horn that makes you get noticed on the freeway. This means more safety on the road when driving because you have a strong honking to alert other distracted drivers. It sounds powerful, like it is meant when you have a big car. Of course the new FIAMM horn specifies it can not be installed on the Nissan Rogue but I was able to install it perfectly without the need for any modifications (no cable splicing, no drilling new holes). Though due to the location and design of the front fascia on the Rogue I needed to remove the front bumper, but you do not need to take it to any shop. It fit as expected and best of all it sounds like a Big or medium size SUV. Happy honking.

This horn is perfect for my needs. I wanted something with a little horsepower to match the bike, the factory (meep-meep) horn was pitiful. I also wasn't looking for an air horn or anything obnoxious. This was easy to adapt to my bike, I do wish the mounting post was longer , I could have had a better install with a little more material to work with, but it's fitted up fine and was simple to figure out. It was plug and play with two paddle connectors. I was able to bend the factory horn mount 90 degrees so the horn mounts flat to the side of the bike. It sounds much different (HONNNK!) and much louder than the original . Pound for pound this was the best return on investment of any of my modifications, I can't speak to longevity but out of the gate this was a great investment in my safety and further customizes my ride with an appropriately matched horn. It's black plastic and blends into the look of the bike in such a way that it does not draw your eye, which is exactly where I like it , camouflaged. Clearly, I'm very happy with the product.

UPDATE 2025-09-21 Horn still mounted in original location, still working, and still very loud. I'm still happy with this purchase. Well worth it. Review 2024-02-23 - FIAMM 72112 Freeway Blaster LOW Note Horn If you input your vehicle type into Amazon's part finder, this horn is listed as incompatible with a 2023 KTM 890 Adventure. This is not true. It is a very easy swap with the feeble KTM stock horn. I installed it August 2023 and it has been working like a champ ever since (currently Feb 2024). The way it sits with the stock "skid plate" allows it to be mounted with the horn port facing down. Mounted this way the port sits just above the skid plate opening, but a few inches back so mud, water and debris from your tire won't get slung inside. The stock horn is attached to an angle bracket - maybe you can see the hex-screw in the photo above/left of the horn. Just remove that, unplug the cables, replace the stock horn with the FIAMM on the bracket. Plug the pos/neg cables in first before you re-mount the bracket since you won't be able to reach them afterward. Takes about 5 minutes start to finish. The stock horn was difficult to hear over the motor/wind at just 45 mph, and completely inaudible over 60 mph. I can clearly hear this FIAMM low horn on the Interstate over 70 mph. I've not had to use my horn in traffic (yet), but I use it frequently on back roads, mainly at night, to warn animals around corners and over hills. Its loud. So far, highly recommended. As always, if anything breaks over the next couple of years I will update this review.

Decent sounding horn. Not super loud, it does the job. Reasonable price.

The horn is very loud with the perfect tone, super sturdy and had everything I needed to install it discreetly.

The low note horn on my truck going out led to quite the comical sound when I would lock the doors on my 2006 F150. I bought this horn to replace it and it came in quick. I was able to take out the whole horn assembly on my truck which included the high and low note horns. I disconnected the old low note horn and had to wire this one in as it was not an OEM fit connector. It was easy enough for me to cut and splice the wires into the included connectors to get it working. Overall, I believe this horn to be just as loud or louder than the OEM horn. I cannot comment on the longevity of the horn as it has only been on my truck for a few weeks but if it goes out I will update my review.

I purchased one of these back in 2021 to replace the factory cartoon horn on my 2021 Moto Guzzi V7 850. I wanted a louder and safer horn. The first one worked fine and installed in about ten minutes. Plenty loud enough. unfortunately, it only lasted 4 years and then it stopped. My bike never sees rain, is garaged and only ridden occasionally so that's a bit odd. I also installed it with the open end of the horn facing down to keep things from flying into it. In any event, I liked the horn so I purchased a second one to replace it. Time will tell how long this one lasts. These are cheap and they work well for me. One thing to note. This horn is sealed meaning that you cannot open it to exam it. Some of these types of horns have nuts that can be removed so you can open them up to inspect and/or clean them. That would be my recommendation to FIAMM. Only giving this 3 stars as it should have lasted longer.

This horn, combined with its low note companion (FIAMM 72102 Freeway Blaster HIGH Note Horn), is a great replacement for the weak standard horns in cars, especially where the horn circuit is limited to 10 amps total (you can tell by size of the horn fuse in the fuse box - many small- to mid- size cars have a 10 amp horn fuse). This horn does not exceed 5 amps, so with its companion high note horn they don't exceed in total the 10 amp limit. This is one of the few quality "upgrade" horns that do not exceed this current (amp) limit, so no risk to overloading and damaging your horn circuit. I have used these, for example, in our Mazda Miata and in our Toyota Prius models we have owned. They are plenty loud and muscular in their sound, so that you can be adequately heard for safety in noisy and high speed situations.

Sad

Original and Genuine

Nickel pour remplacer le klaxon sur mon véhicule. La connectique n'est pas exactement la même que celle d'origine alors prévoir de dénuder les fils et de changer la connectique de série avec celle fournie avec ce klaxon. Son identique .

loud, good

I fitted this to my 2019 Honda CBR650R commuter. I had to extend the original wires as the horn is much bigger than the original and remove most of the left-side fairings, but this took no longer than an hour. It's funny loud! The original horn was pointless. This one is seriously loud. The best $30 I spent on the bike.