Beck/Arnley 131-2464 Water Pump

Seems to do the job well, and actually fit!

This was a big money saver from OEM. This fit my 2016 Range Rover sport super charged v6. They are a reputable company and build a good product.

2013 Land Rover LR4 water pump. Works great.

This water pump was a good factory replacement, but the one of the bolts broke in the engine when I was tightening it. It had barely started to get tight before broke. This led to a huge hassle in trying to remove a broken screw. Although, this was probably a fluke and I just got a faulty bolt. It made my experience with this product less than pleasant. I suggest you go slow with the hardware and if anything feels iffy stop and replace the hardware with another bolt or the old hardware.

I've been using Beck Arnley water pumps for my last 4 Jags and Land Rovers. They are better built than OEM in my opinion as they have aluminum impellers in most of their models compared to the plastic ones in Land Rover water pumps. The price is right and they have never let me down. This 131-2464 model is for the JLR 5.0V8s and it comes with gaskets and bolts BUT it does not come with the plastic tube that connects the back of the pump to the oil cooler on top of the block. If you reuse your existing tube you HAVE to replace the thick O Ring on the tube's pump end and the O Ring on the tube's oil cooler side. If you don't you will leak! Properly installing this tube is critical. The previous owner of my last Range Rover did it wrong and coolant gushed out immediately overheating the engine frying the block. $25k for a replacement engine. Buy a new tube and new O rings and make sure they are OEM. The Chinese knock offs may not seal properly. Also, make sure you retrieve both OLD O rings from both sides of that tube. Others have left one in there unknowingly, installed an additional one, coolant gushes out and it's yet another $25k to Land Rover or Jaguar for a new engine. Go slow on this one and get it right.

Came with gaskets and bolts probably Chinese made like most parts now. No issues with install. Make sure you bleed your system after install and change the plastic coolant pipe and heater crossover part if not you’ll be doing it anyway

Fit my jag perfectly. Got the job done in less than an hour. Runs great. Come with all the seals. However make sure to buy the additional parts and seals. Definitely worth every penny.

The pump worked fine but one of the bolts snapped off in the block with very low torque so that was fun to get out especially after a drill bit broke in the hole while drilling the bolt out to make it that much more fun lol