Klein Tools VDV826-729 Pass-Thru Modular Data Plugs, RJ45-CAT6, 10-Pack, Gold Plated, Power Over Ethernet-FCC-RoHS Compliant, For Solid or Stranded Cable

I recently used the Klein Tools Pass-Thru Data Plugs (Cat6) for a home network installation, and they exceeded my expectations. As someone who frequently works on network setups, I’ve found that these pass-through plugs are a game-changer. The design allows the wires to pass all the way through the connector, making it easy to verify correct wiring before crimping. This feature alone saves a ton of time and frustration compared to traditional plugs. The build quality of these connectors is excellent. They’re durable, secure, and designed to handle high-speed Cat6 data transfers without any performance issues. The connection quality is outstanding—no drops or interference, and the data transfer speeds have been top-tier since using these plugs. Additionally, the compatibility with Klein’s pass-through crimper ensures a clean, professional cut every time. No more guessing or trimming extra wires after crimping! If you’re looking for dependable, high-quality data plugs that streamline the entire installation process, these Klein Tools Pass-Thru Data Plugs are a must-have. They make setting up Ethernet cables easy and efficient, and the end result is flawless. Highly recommend for both professionals and DIYers!

These connectors worked easily to replace a broken RJ45 connector. I didn't have the Kline tool designed specifically for these connectors, by my generic RJ45 cable crimper worked just fine, then I trimmed the protruding wires off flush.

Update: As it is cat 6 and these do fit cat 6 receptacles, I am changing the rating. These are easy to use and make verification that your wires are where they should be. Unfortunately, these don't fit AT&T wireless modems or Unifi wireless U6+ APs or the UCG max ports. There is a little nose on the connector that prevents the terminal from inserting completely. They do fit in the keystone ports (iwillink), so all is not lost. Your mileage may vary. I should have done more research on the connector before buying.

Very good for the DIY’er who needs the ‘pass thru’ type of connector. This allows you to strip the outside insulation off, untwist the 4 pairs, and then place them in correct order to slide in the connector. This allows you to pull the entire thing onto the outside insulation and crimp into place. Small diagonal cutters are needed to trim all the ends flush to the connector and you’re good to go.

I used these successfully with Cat6, UTP, outdoor rated cable. I've made probably a dozen connectors and had no failures, though a few of them took several tries. That probably speaks more to my skill than to the quality of the connectors. You do have to take a lot of care to have the wires lined up perfectly and very straight before trying to push them through, otherwise they bend or go in wrong. However, I just purchased some Microconnectors shielded outdoor rated Cat6 (F/UTP) and it seems the conductors on this cable are just a bit larger. It's pretty much impossible to get these into the connectors. Others have reported similar problems. It seems that there's some variation among the outdoor rated Cat6 - especially the shielded varieties, and some are just too big for these. It would be good if Klein reported which brands their connectors are compatible with but I haven't seen anything to date. I just ordered some connectors direct from Microconnectors that are specifically intended for this cable.

I am using these with 23 AWG solid copper CAT6 cable. Their design is such that the cable sheathing can be pushed a full 1/2 inch into the connector. This allows me to cut the eight wires with a pair of extra small nippers and then pull the cable back out 1 mm. This causes the ends of the eight wires to be INSIDE the connector so I am guaranteed there are no short circuits. I use this method because I don't have the new RJ45 crimping tool that both crimps and cuts the eight wires. My old crimper plus small nippers does the job just fine. I first bought another brand of RJ45 connectors and their design would only let the sheathing to be pushed 1/4 inch inside the connector. I threw them in the trash. This is the first time I tried using the new "pass through" style RJ45 connectors. They are SO much easier to use. The eight wires do NOT have to be the exact same length and once they are extended through the connector, the color sequence is much easier to verify. "Pass through" connectors are all I will buy from now on.

These pass-thru connectors are way better than traditional crimped connectors. Along with the Klein pass-thru crimp tool, these will save you time and effort.

I had câbles that just wouldn’t make a good connection. Crimped and re-crimped. Then I found these connectors. They work every time, and easy to align for cat 6 and cat 6a cables.

Calidad de materiales, conexiones sencillas, aun que un poco alto su precio!

Works well and does exactly what it says it does. I have nothing to compare it to but it works.

There are mixed reports of how well this works with bigger gauges, unsure if this is due to varying insulation between cable brands or a mix of reviews for old vs new connectors; but as of July 2024 I can confirm this fit 23awg solid copper cat6 from 4Cabling just fine.

Bra och snabb leverans bra kvalitet

I really liked these connectors compared to the older style punch down ones. Much easier