USX Mount Full Motion TV Wall Mount for Most 42-90 inch Flat Screen/LED/4K, TV Mount Bracket Dual Swivel Articulating Tilt 6 Arms, Max 16" Wood Studs, VESA 600x400mm, Holds up to 132lbs

These are fantastic mounts. The ability to have my TV out over foot from the wall so that I can work on it without having to take it out is clutch. It uses a standard size screw to mount into the wall, height wise. It's got a smaller footprint than some of the other types of mounts that you might see, so it fits anywhere and at any height you need it to.. It has the ability to tilt in any direction you need it to to fit your room. Installation was really easy. Just takes a little bit of putting things together, but the final product is sturdy and works perfectly.

I have to say, this was one of the most well-thought-out products I've ever purchased. The item arrived well packaged in a sturdy box (inside another Amazon box) with everything well laid out inside. All of the fasteners were individually packaged so there's no fishing around for the right part. For the record, I used this to mount a 65" TV that weighs about 50 lbs. It is definitely sturdy and can hold much more. Additional tools you will need: Tape measure, stud-finder, drill w/drill and screwdriver bits, wrench & socket set (SAE). Mounting on the wall was a breeze. My advice to other buyers that you will need to locate the wall studs accurately and you will need drill the pilot holes as close to the center of the studs as possible - particularly if you're mounting a heavy TV. There's just no getting around that. Use the "stud-finder" to mark the edges of the studs, then use those marks to determine the mid-point. Make a couple of passes to be absolutely sure. Included in the package is a peal-and-stick cardboard template and two bubble levels. Don't bother with the one that you're supposed to stick on the template, just use the big plastic one. You're going to want to do some measuring here to make sure you place the mount exactly where you want it. I was lucky that the center of the TV was almost dead-center between two studs. You'll also want to measure the height of the mount by test-fitting the part that goes on the TV and doing a little figuring on how much to move the mount up or down so that the TV is where you want it. Once you've drilled the holes, screw the bracket to the wall and use a wrench to snug the screws tight. Don't over-tighten or you'll strip out the holes. Make sure you put the mount right side up (Yes, I made this mistake). Next, attach the brackets to the TV. The kit comes with an assortment of screws, washers and bushings to accommodate any TV. Each TV is different and you're just going to have to use common sense. Don't over-tighten these screws either, but the brackets need to be snug. Before hanging the TV on the wall mount, ensure that the side-to-side and front-to-back tilt adjustment screws are tight and relatively level. You can adjust them later to get them perfect, but you should have them close to where they need to be now and tightened down so the mount doesn't move when you're trying to hang the TV on it. Have someone help you lift the TV onto the wall mount. It just hangs on there (at first), but it's much easier if you have someone to help guide it into place. Attach the locking brackets to the bottom of the TV brackets and you're done!!! Operation of the mount is very smooth, though it takes just a little bit more effort than I'd like. I attribute that to the fact that it's brand new and I'm certain a few drops of oil strategically placed will resolve that. BY NO MEANS would I suggest getting a different mount based on that purely-subjective opinion. This mount is perfect for a big TV. It's a little pricier than most, but worth every penny. Read less

I installed this mount for my 67" flat and am very impressed with it. Very sturdy, easy to install, following the easy to read directions. I am more impressed with the smooth tilt and overall movement aspect of this mount. The TV can be moved in and out and angled with one finger...I recommend this mount with 5 stars.

My husband and I recently purchased our new home back in August of 2025, and since then have been working on multiple renovations project. The USX mount was exactly what we needed to complete our electric-fireplace bump out project! There are multiple pieces to assemble but the quality of the TV mount itself is unmatched when it comes to the price point. Due to our short ceilings we had to mount our 75” TV pretty close to the ceiling, having the ability to tilt the mount has helped prevent neck strain! I wish that the mount itself extended out farther, but ours is mounted in a tricky spot that doesn’t leave much room for the TV itself to tilt left and right. If we would’ve mounted it farther it would’ve had a better range. It would be perfect on a flat wall for optimal viewing. Hanging the TV itself was incredibly easy, even with how large our TV is. The mount has secure “teeth” that you just need to hang that brackets off, then tightening the screws. If we’re ever in the market for another mount, we’ll definitely be going with USX!

The mount is well made. The installation instructions are pretty thorough and the installation is straightforward and easy. I am very happy with this product. I liked it enough to buy a second one.I would REALLY REALLY REALLY like to give it 5 stars. Unfortunately, I have to dock it a star. I made the mistake of starting to install the mount without making sure that all of its parts were in the box. Alas... I was close to finishing the installation when I discovered that a needed part was nowhere to be found. Not the best time for this to happen, half of it was already bolted to the wall. Disappointed? Yes. But these things happen. Things can slip through the QA cracks. As long as their customer service can rectify the situation, I'm still a happy customer. I look through the documents in the box for the customer service information. Turns out that I was 20 minutes past the hours that they were open to take phone calls. But they did have an email address! Yay me! I sent them a quick email about the missing part, and figured that at the earliest that I would get a reply from them would be the next day or more likely many days later. To my surprise, an hour or so later, they emailed me back requesting some more info 😀. It only took a couple of emails and they agreed to send a new part. At this point, I'm a super happy camper. Everything was handled by customer service in one evening. KUDOS to the people in the customer service department! The next day, I decided to order another of the same mount for another TV. After all, I like the mount, and I was impressed with how their customer service responded to my problem. That day I also received a notice that a shipping label was produced to ship my part! Again, yay for me! Here's where they loose the star. I received the 2nd mount that I ordered that same day! I made sure that it included all the parts that it was supposed to have, and it did. So I took the part that I needed, and used it to finish installing the 1st mount. Set the 2nd mount aside and waited for the replacement part to come in so that I could install the 2nd mount. So far, I'm happy as a clam. But then it took nearly TWO WEEKS for the part to leave the shipper! I have no way of knowing whether it was their shipping department or USPS dropped the ball at this point. A miscommunication between the shipper and USPS, or something else. What I do know is that the shipping department didn't feel the need to let me know that there would be a delay. If not for me ordering a 2nd mount and it arriving very quickly, I would have been stuck with having half of a TV mount bolted to my living room wall and my TV sitting on my couch. That would have blown monkey nuts. Quality of TV mount: 5 stars Customer service: 5 stars Whoever in their shipping department that took nearly 2 weeks to send the part: not 5 stars and the employees in customer service should mock him or her. I would only dock them a half star, but there's no option for that. If I need a 3rd TV mount, I will buy it from them.

This USX Mount full motion TV wall mount is awesome! The installation was straightforward, and once up, it feels super solid and secure. The full‑motion design lets me tilt and swivel the TV to the perfect angle — whether I’m lounging on the couch or watching from the kitchen. It’s smooth to adjust and really opens up the room. Great value for a dependable mount that makes viewing way more comfortable! 🙌✨

I bought one of these for my 32 inch tv. I was concerned it would be too big for that TV size, but it actually looks really good. Then I bought another one for my 55 inch TV, and just installed it. LOVE these mounts! My plan is to upgrade the 55 incher to a bigger one at some point, and move the old one to where the 32 incher is. Bought the same mounts for consistency and to avoid issues when moving and installing the different TVs on the wall. Got a really good price for them, so I am super happy. I honestly can’t understand why some companies charge hundreds of dollars for a TV mount these days when these are absolutely perfect and are so decently priced. They are really well thought out and manufactured. Sturdy, reliable and easy to install. Great for both light and heavy TVs. Very high quality materials - a nice surprise here. They work equally well for 12 and 16-inch distanced vertical studs. The paper sheet which comes in the box makes markings on the wall and aligning everything super easy. The mount itself can be tilted both vertically and horizontally. In case the installation of the base of the mount isn’t perfectly leveled on the wall, you can further level your TV from the front of the mount. The wrench/screw driver which comes with the kit is kind of useless (poor materials - you can’t tighten anything with it - it’s too soft) but I would assume you have your own decent quality wrench and screw driver. You’d also need a drill and a decent ratchet or a wrench to securely tighten the mount on the wall. Depending on your TV, you might also need special screws to attach the brackets to the back of the TV. This kit comes with several of the most popular size screws, but my old Sony required different ones. Thankfully, a quick run to Home Depot solved the issue. Needless to say, I am super happy with these mounts, and would recommend them to anybody planning to install their 32-80 inchTV on the wall. Happy shopping 😊

Sturdy and holds a 70 Vizio TV well. We did not need it adherent to the wall like some people do, instead wanted the ability to pull it away for the wall in various configurations for viewing. While it says full movement do realize that once the height is established the arm does not allow any vertical adjustment. Instead you have to drill new holes in the wall at a different height. Therefore height calculation is the most important measurement and you need to understand where you want the top and bottom of the TV to be positioned and then measure relative to where the rack will attach to the wall which is lower than the perimeter of the TV. We wanted the bottom to be about 10" up from the furniture piece where our center speaker and AVR receiver are located. We added another 3" of space that we will need to the future if we get an 86" TV as it will be larger and hang down 3" lower when using the same mount position on the wall. The bolts are substantial and required several drill bits to make the holes into 2x4's, building successively from smaller diameter to larger. If you have a large TV it takes 2 people to assemble. So study the parts and partially assembled them a bit ajread of the instructional which are so-so because you will have to predict some height measurements vis a vis where the mount arm actually attaches to the back of the TV part of the rack. Tape measure! We will collate the visible hanging wires into a black stereo wire sheath. Very good value for the price and ability to hold a lot of weight. Be careful about the mm distances at the back of your TV for screwing in the mount because a range of values is listed but the 400mm is the maximum height and the 600mm refers to the width. Ours is 400x400.