Premium Cosmetic Uppers - 1 Pack - Small, Natural White - DIY Smile Makeover - Made in USA

First off, the order process was easy, tracking was perfect, and my items arrived late afternoon the day it was scheduled to arrive. I only order from Amazon occasionally, but I was impressed with the speed and efficiency! Kudos to Amazon on their process and delivery. Now for the product. I ordered the small natural teeth and an extra bag of pink material and white beads. I didn't end up needing any of the extra material, but I'm glad I ordered it in case I need to make adjustments or if I need extra for a second set. I ordered the small. Now the website advises taking a measurement across your 4 front teeth. Less than or equal to 1-1/8 inches is small and 1-1/4 inches or more is large. I'm an average to smaller sized male, 5'8", 160lbs and my measurement is just under 1-1/4. I considered the large, but everything I read or saw on the Internet said that the small was better for the average sized mouth. I ordered the small and am glad I did...they are a perfect fit. Unless you are over 1-1/4 inch across your 4 front teeth, I recommend the small. I've seen videos and pictures of the bleached white and unless you have bleached lower teeth or dentures, definitely get the natural color. Even these are a bit bright, but I'm a smoker, so my bottom teeth have been slightly colored from smoking. Fitting these is not difficult, but you HAVE to pay attention to the instructions and watch some videos on YouTube, especially the one from Nancy, the inventor and her husband. I got an almost perfect fit the first time, but tried to make it better and screwed up the whole fit. I was frustrated and decided to try again the next day. That's the beauty of these...you can always put them in some near boiling water, re-melt the plastic, and start all over again. The second time I got a fit I'm happy with. I've worn them daily ever since and they are very comfortable. If not, you need to re-set them...there should be no pain, rubbing, or interference with bottom teeth with your jaw closed. I smoked with them in a few times for a little coloration to match my bottom teeth, but usually take them out unless I'm using my e-cigarette. I guess this may help me complete the switch from cigarettes to the e-cigarette, since I don't feel the need to take them out when vaping. There's no way I could eat with them in without absolutely destroying them. I avoid drinking anything with them in, unless I'm using a straw, which completely bypasses the appliance. I only have one molar left in my mouth, so I'm a tough case when it comes to fitting. On the left side, the end of the appliance matched exactly with the last tooth on that side. On the right side, I'm missing the last 2 teeth that would normally anchor that side. I ordered extra plastic material because of this. I built up extra plastic in that area in place if those 2 teeth. While not perfect, since there's no solid anchor at the end of the appliance on that side, it's plenty solid. The fit is tight enough on my other teeth and the extra material keeps the end stiff and in place, so I have no issues and it still works with the missing teeth. If you have teeth missing anywhere in the middle of other teeth, it can actually help to hold the unit tightly, but if they're at the end of the appliance, it can be problematic, but with patience can be done. I've had bad teeth since birth. Brushed 2-3 times daily, minimum, and still had cavities almost every dental visit. Not having insurance for why too many years has taken it's toll. I've managed to keep my front teeth and have a bridge on the left side. Since the back ones aren't very visible, taking care of these frint teeth has been the goal and all I've been able to afford. Last week, I chipped my right front tooth badly, approximately 25% gone. My years of covering the best I could for my bad teeth was over instantly with that chip...it looks horrible and very noticible. Try as I might to hide it, I could tell people were noticing at work and client locations that I visit. I'm saving up to fix it, but until then, this product is a godsend. I can hardly believe that this product works as well as it does for $30 + shipping ($6 for the extra material, which I didn't end up needing, even with the last 2 teeth on my right side missing). Is it perfect? No. Will it work for everyone? No. But if you have enough teeth left to anchor the appliance and plenty of patience, this solution can change your life. I went from a decent smile to looking like a crackhead with one huge chipped tooth. This product changed that, very affordably and quickly. Now my upper teeth look MUCH better than even before the chipped tooth. My girlfriend is impressed with them and is jealous that I was able to fix the problem this cheaply and quickly...she's spent many months and hundreds of dollars on dental work in the last couple of years. While I'll still need to get work done, it's not an emergency anymore and I can save, getting the work done at a pace I can afford. If you're skeptical, don't be...these will work as long as you have the teeth to bond and mold to, you CAN make these work, if you are serious enough. I can't thank Imako enough for the product they sell and will be a repeat customer! They really are changing things for the better for people, one smile at a time. If you've never experienced the discrimination that can come with bad teeth, you may not understand how people are turned down for jobs, may lose business deals, and social opportunities simply because of the appearance of their teeth. It even becomes the thing that people remember about you the most...a label that sticks to you in the minds of others. Most folks can't help it...it's a natural aversion that many people have, but now there is a way to change it. Once you have a new smile, people will notice...I tell them that I had a cosmetic dental appliance fitted. It's no one's business that I was the one who fitted it...lol. Everyone who has noticed, so far, has thought it was professionally done...and I just smile!

I realllllly wanted to like this product, I really did. The first 50 attempts were a failure so I took a break, took a nap, and came back later to play with it again. Each time I heated the material to mold it to my teeth, the harder it got to stick. On the last attempt, some of the molding material actually got stuck onto my teeth and I had a HORRIBLE time getting it off. During my attempts with scissors, tweezers, and finally sandpaper, I also knocked some of the tooth enamel off in the process. I'm not even sure now if it's all the way off yet or not as I still feel something there. While the entire tooth thing didn't stick to my teeth, some of the molding material must have gotten hung up while trying to mold them. It was downright annoying and still is even as I speak. After the first few attempts to get this thing stuck right, I noticed that the back would not stick at all. I followed the directions, even watched YouTube videos, even one where the owner herself showed exactly how to do it. Didn't work. Once it hardens it is also extremely rigid . I have a gap between my front teeth and the bonding material went right into that gap between my teeth ,so when I went to put the cooled product back on, there was a lump that needed to go between my teeth there at that gap and that kinda hurt/was uncomfortable. Also made me worry I'd do more damage to my teeth. I did get a good snug fit the first go around . I could talk fine, it didn't affect that at all. But i looked like Mr Ed. even my kids were weirded out so I know it looked bad. Overall i would not recommend this product. the color was off too.. didnt look natural at all in my opinion. for the first time in my life I was glad to see my normal teeth again when i took this thing out. i'm sad but will try secure smile next. maybe i'll have better luck with them.

So I read the instructions and saw they want you to do this in your mouth with a mirror. I had doubts about my ability to do this in the mirror with my poor eyesight. That's not how a Dentist would do it, they take impressions. And it just so happens I have a bag of this "moldable plastic" I bought for an entirely different application. I went on thingverse and downloaded one of those trays the dentists use and 3D printed it. Then I used the moldable plastic to take an impression of my upper jaw. I made the positive from the impression with Durabond 45 plaster. Then I followed the instructions without the need of a mirror on a table with good lighting. I setup one of those water boilers college kids use for the ramen noodles with a thermostat and relay so it maintains 150F consistently. Did the pink stuff and the veneers, which looked to be too small when I bent them around the teeth while cool, but with heating they line up pretty good, they get a little off and the ends. Then I filled the missing tooth with the moldable plastic. All this on the plaster model. I thought I'd try them, went to Walmart and didn't even get past the bananas and I had to take them out. When I got home I took 8 ibuprofens and the next day I put them in the ramen pot for about 5 min and then installed. This made them fit really good, so good it took two hands to get them out. I wanted these not for Walmart trips, but for times I have to talk to people. I had an evening job that lasted 9 hours that night. I wore them almost the whole time, except for when I ate. I honestly forgot they were in. I could talk on the phone, to the POC at the job, etc. I'm really happy with the way they turned out, the color is right and everything. The company reached out to me almost immediately with their phone number to call if I have problems or issues. .I kind of expect many people can't do this in the mirror, I certainly don't mind them using my review in their literature to help those inclined to go the extra mile. Mine came out so good my brother want to pay me to make him a set. He had some he paid over 1K for and his mouth changed over time, and plastic degrades and they broke as well. Highly recommended and I would buy them again for myself, but it may be a while.

Okay so I only have 5 Five front teeth, the 2 ‘fangs’ being the furthest , no side teeth. However this fitted perfectly and with some denture glue would stay in all day no problem. Do not delay in ordering this to improve your confidence, mine fitted with the first go, I followed a video on YouTube by Juliean Hollyweird and bingo 1st go they was moulded to my mouth stayed in. 5/5

Wow absolutely amazing product. Broke my $2500.000 retainer couldn't afford another one but needed teeth to go out in the world everyday. Took me a couple of trys to set them up right but look amazing. Now I don't have to be embarrassed while I am saving for implants

Super

it makes me smile confidently

It says realistic look but the tooth colour is not realistic. Pricey. Not flexible. Hard to fit. Front tooth match my tooth size . Other brand front tooth too small.