FURY5-S Multi-Purpose Table Saw with Additional Wood Carbide-Tipped Blade, 255 mm (230 V)

Assembly took a little while, once up and running its quite loud, I wear ear defendrs so that's not an issue, I woul suggest that you should wear them however to avoid ear damage . The machine cuts wood and metal easily very Impressive actually. The blade is obviously a compromise as it Cutts sll sorts of things . How long it will last I don't know. Its not the most accurate measuring scale on the machine, however as long as you double check measurement it does the job. I've just cut through 15 tubular steel bars 15mm thick with ease.I can recommend this item its not a Makita or Dewalt, but is very cheap and dies the job well. All Mtmy other tools are makita ( sliding mitre saw) and its not in that league at all but its 3 times cheaper and for occasional use its brilliant. I don't think it would last as a ' work a day tool'But I know that not what or who it was designed for. I'm a fussy buyer and I'm well pleased with the price and what it does.

For the price I have to say it’s better than I had expected and than previous reviews I’d read.Something that seems to be a common feature, people reporting damage when their brand new table saw arrives, this was also the case for me, some deep scratches on the extensions and body parts.Very simple to construct and out of the box it’s pretty damn accurate.People had reported that the multi mat cutting blade doesn’t/ didn’t cut totally clean, well I’ve been cutting near 2” thick hardwood ply sheets, 4” hardwood planks, they are straight, true and clean, this may change as the blade dulls just like any blade.The fence has been a complaint area, it is short and really should lock both sides of the table, but after I used a level and straight edge, I tightened the screws holding the fence to the guide run and it’s been perfect, no movement and I haven’t had to clamp a plank behind it yet either.Dust extraction is pretty decent, I dare say would be even better if I had my dust extractor hoover attached not a standard hoover.Blade guard can be a pain in the ass, I marked a straight line from the side of the blade to edge of table to help with lineup and works great.It’s stable and sturdy with work on it and thus far done everything I’ve wanted from it, so I’m happy

I had been looking to purchase a saw table for the garage as i was often needing to cut long strips down in width so had been looking at a few options available. There were a number of option that were cheaper and a lot which were a lot more expensive.I have an evolution sliding mitre saw which i have never had any issues and has always worked well so i decided to try them again for the saw table. Something i liked was that they are a british company and if you need any help you are talking to someone in the country.When i purchased this, i was one of the first and it had only just been released, replacing the Fury 5 table. As there aren't many reviews i wanted to leave some of my thoughts and impressions.The table comes in a fairly large box. be prepared to spend an hour or two putting it all together. The legs, braces, nuts and bolts etc all come within the main body. Some were a little awkward to remove. If it is tight, turn the wheel on the front to raise the blade mechanism, this will give more space to remove the components. Just take your time, follow the instructions and shouldn't be any problems. For aligning the side metal wings, its best to retract the blade and use a flat surface. Turn the saw upside down and start fitting the wings. So long as you assemble on a level surface you should get a pretty accurate table top.The big advantage of the evolution products is the blade. If you think you may want to cut more than just wood then this is a great choice. It can cut right through wood even if it has nails in it. Will also cut plastic and softer metals like aluminium.As expected at this price range the machine has a plastic body but i haven't found this really causing any problems. Its stands stable and functions pretty well. The wheel at the front is easy to turn and allows adjusting of the blade height. You can pull the wheel out and turn it to adjust the angle of the blade so you can cut mitres. The machine comes with a plastic push stick which fits on the side of the machine body. There is also a measurement rule which is the full length of the table top. This is handy as other tables often have a rule that doesn't extend over the wings.There is an adjustable angle push which slides within the guide rail to help feed and but wood at right angles or various other angles. I tend to just use my sliding mitre saw instead of this. Its not too bad if you don't need deadly accuracy but there is a fair but of play in the guide so it not the most accurate.I had a couple issues which i will mention in case you find yourself in the same boat.... In general i think its normal to cut with the blade only half a tooth or so above the material being cut. I found though that the blade had to be much higher otherwise the material got stuck at the rear of the blade guard which wasn't clearing it. To fix this, take off the plate round the blade (power off, of course!), raise the blade to its full height for easier access, loosen the black metal blade guard (riving knife) behind the blade (which the blade guard bolts onto) and raise it up so the hole the blade guard connects to is level or slightly above the blade. Tighten and put the guard back on. This solved it for me with proper clearance.The only other issue i had was the riving knife seemed to be very slightly out of line, perhaps a mm to the left of the blade. Although this was only a fraction it can cause the material to catch. I think This won't be general and i was just unlucky as its normally set at the factory. i did have to adjust mine slightly though which i shouldn't have needed to do.Overall its a nice machine and i have already had good use from it. Hope this is helpful to some of you that are trying to decide.Plus i do like the yellow and black!

With the exception to the partially flimsy rip fence (as it only locks on one end) this thing is epic!Assembly was a pain but got there eventually I have cut up over 120 pallets with this made precision parts for cabinet doors bedside tables and it has not let me downI have cut aluminium and steel and this thing does not care about nails or screws in wood!Overall it’s awesome and sturdy rip fence needs a secondary lock and the top extractor pipe gets in the way!It’s a good high quality tool!

Very pleased with this little gem. The price is good. Not a fixed workshop machine, but it's only a small fraction of the price.