

🔎 See every angle, miss nothing.
The Supereyes NA002-1 Digital Borescope Side View Mirror Set includes three precision-engineered mirrors at 30°, 45°, and 60° angles, designed exclusively for 7mm diameter Supereyes N005, N013J, and N015 series borescopes. Lightweight and easy to swap, this set enhances your ability to inspect narrow, hard-to-reach spaces with professional accuracy.



| ASIN | B00CBKFJ9Y |
| Best Sellers Rank | #309,135 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #584 in Borescopes |
| Customer Reviews | 4.0 4.0 out of 5 stars (536) |
| Date First Available | April 11, 2013 |
| Is Discontinued By Manufacturer | No |
| Item Weight | 2 ounces |
| Item model number | NA002-1 |
| Manufacturer | Supereyes |
| Product Dimensions | 0.98 x 0.28 x 0.28 inches |
A**R
Covering all the angles
The borescope gets into some nasty places. Mirrors work great when they're clean, AND when they are at the correct angle for what you want to see. This set provides much needed different angles, and allows switching with the ones that come with most borescopes, so one set can be cleaned while the other is getting dirty again.
G**G
NOT COMPATIBLE WITH OTHER BRANDS/MODELS
These mirror attachments appear to be good quality. HOWEVER, they are internally threaded & apparently intended to screw on to the body of specific model borescope/endoscopes. Read the fine print as to what they fit. They DO NOT FIT Depstech 5.5 mm diameter scopes (no threads, no way to attach) and do not fit Shekar slim 2.1 inch scopes (no threads, no way to attach and wrong diameter.) Having blown $10 on them, I suspicion I could use heavy duty duct tape and mount them on the Depstech camera because the diameters are compatible. Kludge of course.
Y**M
"Supereyes" Borescope Side View Mirror Set is compatible with "XCSOURCE" 7mm Waterproof Borescope Endoscope camera.
Dear Seller and Customer This Supereyes Borescope Side View Mirror Set has a compatibility with the diameter of 7mm Supereyes Borescope N005, N013J, N015 series, It is not only compatible with Supereyes Borescope N005, N013J, N015 series but also compatible with other brand XCSOURCE 7mm Waterproof 200x USB Microscope Inspection Borescope Endoscope Pipe Inspection Snake Video Camera. I confirmed this compatibility. you have to unscrew the top cover part of 7mm endoscope camera in order to install this mirror.(see attached photos) Have a Great Day! Kim
J**N
Wrong size
Don’t waste you money over priced and will not fit , doesn’t state size of treads , not worth the hassle to return.
L**S
Essential borescope accessory
A set of these mirrors is more or less required to make any use of a borescope. My own scope is not directly compatible with these heads (its OD is smaller), so I adapted it by putting layers of heatshrink tubing over the end of the scope until it was a snug interference fit. The whole setup works very well.
M**7
Doesn't fit product it was advertised with
I can't comment on the quality, but these didn't fit the product below that I purchased at the same time. These were advertised with that Borescope as a "Frequently Bought Together" item. They shouldn't be advertised together if they don't work together. Below is the borescope I can tell you is NOT compatible with these mirrors. USB Endoscope, Depstech 2 in 1 Semi-rigid Borescope Inspection Camera 2.0 Megapixels CMOS HD Waterproof Snake Camera with 6 Adjustable Led Light - 16.4 ft(5 Meter) These are being returned.
A**B
Aluminum construction with real mirrors inside
These were recommended as an add-on for the Bluefire endoscope I was ordering at the time. They're made of aluminum and have real mirrors in them. The threads felt a little loose when screwing them onto the endoscope but they snugged up once they reach the bottom of the threads.
G**R
Easy fix
Have cheap scope non threaded. Couple off layers of electrical tape then try screw on. To big ,back off sum tape half inch & snip at time till it would screw on over tape. Works good . Stays on . One off mirrors has bad scratch but other 2 were fine. They should wrap them individually so not to rub on each other in shipping.
A**R
Great for getting into hard to see areas - extends the usefulness of Borescope
N**1
Didn’t fit my borescope The mirror quality is very poor quality plastic crap Not recommend
D**I
Li ho acquistati per un endoscopio di marca differente con l'illuminazione sulla punta. Lo specchio tende a inviare indietro una parte delle luce impedendo di vedere correttamente. Meglio usarli senza luce in punta ma bisogna illuminare bene la zona da ispezionare (ciò non è sempre possibile). Durante l'applicazione meglio attaccarli con nastro adesivo attorno alla punta dell'endoscopio per evitare di perderli durante l'estrazione.
D**N
item didn't fit what I needed it for but the seller was great with helping me with my order
A**R
These mirrors are good BUT you have to peel the protective plastic coating off the face of each mirror! If you don't do this then they look scratched and don't work very well. This is by design! I gave them 3 stars because the mirrors are made of soft plastic and are not recessed for protection. They do work very well however and the picture is a bit distorted geometrically due to their plasticity. If you need them, then I definitely recommend you buy them.
Trustpilot
Hace 1 día
Hace 1 mes