ELEGOO Water Washable 3D Printer Resin 2.0, Fast Curing Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing, Beige 1000g

TL;DR Use this to learn to use a resin 3D printer. This is a fantastic resin to start your 3D resin printing journey. Being water based, cleaning prints and spills is easy and safe as only water is needed. Spills on the table, which will happen, clean up easy with a little soap and water. The smell is not bad either. I use a cheap heated ultrasonic cleaner after an initial water rinse. This cleans most small areas of excess resin. A quick rinse after the ultrasonic cleaner finishes the job. Just be sure to allow the print to dry fully after cleaning before curing as the green print will absorb water. I use a heated FDM printer's heated print bed set between 40°C and 60°C as a drying space, and cover the print with a double layer of paper towels to hold in the heat. Just don't let it sit more than 20 to 30 minutes as the heat can cause the print the start shrinking and crack.

This is a great product by Elegoo easy to use, quick cleanup and a satisfaction you'll receive when your 3d print is complete!!!!

Product was exactly what seller described

So I'd like to state that I've been resin printing for a couple years now. This resin works well for my purposes (printing miniatures), but I find water washable resins to perform just slightly worse than standard resins. It's not a crazy notable difference, but I notice slightly more failed prints. Odor is surprisingly low, so that's a plus. The price point is about the same as any other standard/water-wash resin. Word of warning about water washable resins. First of all, alcohol will ALWAYS be a better cleaning option. These are water washable, but for the best print quality, you're going to need some kind of chemical cleaner; end of story. Additionally, the water you use for cleaning needs to be treated/disposed of properly, just as you would alcohol. Is it cheaper to use water? Yes. However, it's no less of a hazardous material once it's full of resin. You cannot just pour resin water down the drain. Please review your local waste disposal guidelines to find out how to handle runoff.

Great product fast shipping.

Nice reliable low odor resin prints and cleans up well using Elegoo Mars 3 pro.

I have a Mars 2PRO and I've never had a problem with this resin. Cleans easy, prints easy, no complaints.

This is a great product. I much prefer this resin to resin that needs isopropyl alcohol to clean the print. water is much more economical to use. Water is also easier to depose of. This resin has printed well for me. I followed the settings recommended by Elegoo and I have had no issues with it.

First time user of a resin 3d printer, I thought I'd give this stuff a go because the price was decent. Man, this stuff is performing great. Given that I was a beginner at resin printing, this resin printed perfectly the first time, and every time since then - I've not had a failed print, the detail is amazing, and it most absolutely is water washable. Clean up is a breeze, on the printer and the models - some soft cleaning cloths to wipe off the film on the build plate and the tray is all that's really needed, the rest is washing in a vat of water until it's all clean. Quite easy to clean up. Prints are great, cures well in my homebuilt curer, and the smell? Honestly, I thought resin printers were going to stink like crazy - while this does smell, it's nothing that cracking the window open a little bit and turning a fan on for a minute or so won't solve - very very little hassle at all. Almost a non-event. I'm still on my first bottle, and I've already gotten another 3.

Ótimo produto

Works fantastic So much easier to clean after printing

Muy bien material...

The Beige is a wonderful colour and the prints I’ve done have all come out great. But the bottom layers have stuck to the build plate and taken ages to remove. I suspect the because the resin is partially translucent it is overexposed when the base layers are put down (also those layers are very brittle). I’ve had to drop the exposure down by ten seconds (compared to the grey resin) to get it to come off the easier.