Mould Stain Remover Gel Cleaner - ACTIVE Heavy Duty Stain Cleaner for Front Loader Washing Machine Seal, Rubber Gasket, Bathroom Grout, Shower, Caulk - Front Load Washer Cleaning Solution - 7 Fl Oz

Used this on washing machine door rubber seal which had turned black in the bottom, left it on for a couple of hours then wiped it clean, all black has gone, very clean, very easy to use, comes with nozzle and you can easily squeeze the gel on. I did use too much, I think a light full covering would work. Very impressed

I’ve been fighting mould colonies in my front-loader’s gasket for years and nothing worked until this. The gel is properly thick, so it stayed exactly where I put it on the rubber seal. I left it for about 5 hours, and when I wiped it away, about 95% of the black stains were gone. It’s a five-star, high-quality solution that saved me from having to buy a whole new replacement seal. Properly chuffed!

I purchased this to clean the door seal of a washing machine we inherited with a house purchase. The door seal had seen better days and was quite discoloured. I was hoping this would kill the visible mould lining the seal and return it to its intended grey colour. Applying the gel was straight forward - though it’s worth noting you do need a Stanley knife (or similar) to cut the nozzle of the bottle. There was no overpowering smell and It was incredibly thick which was great for ensuring it stuck to the surface I was applying it to, but it did mean I ended up using more than I probably needed to had it spread a little more. That said, there’s plenty for two applications in one bottle since it’s a good size. I left the gel to work for three hours. It worked well, removing the black mould and only leaving a slight discolouration in its place. I imagine it would be completely cleared after a second application (or perhaps if I’d allowed it to work a little longer). Clean up was relatively straight forward, but you will need plenty of damp and cloths to get it removed fully. Overall, I’d say it’s good value for money.

Worked amazingly and took off all the black mold in the rubber seal around the old washing machine. The instructions were straightforward and easy to understand. I did two rounds on some harder areas but most only required one, so amazing value for money. It did smell of bleach but not any more than expected, and this was easily dispersed with a cracked window and by washing the area after. The only thing I'd note is that squeezing the bottle to get product out after the first half was gone was really difficult and I don't know that anyone without a significant amount of grip strength would have had an easier time. I ended up squishing the product out onto a plate and then using gloves fingers to wipe it on after a point. To be clear: there was loads of product but if you're squeezing for something where the bottle as to face up (as I did getting the top inside of the rubber seal), your hand will be aching for hours.

This really works, its cleaned my washing machine rubber like brand new. Easy to use, product is accurate gel substance, nice and thick bleach like smell, MUST wear gloves to apply. There is enough in bottle for x2 usage. If you have black stain mould growing on rubber I recommend this product, excellent, will definitely buy again.

Not bad won’t buy it again

I was looking for a product that would remove old black mould and stains from my washing machine seal. My husband was dubious about finding a solution. I tried this remover and was amazed that the mould was completely eradicated. Easy to apply as a thick gel. I left it for 5 hours as recommended and wiped off the now hardened gel to find a lovely clean seal. Since used it on the kitchen window ledge seal with exactly the same result. Highly recommend this product.

I never usually leave reviews but this product worked so well I just had to. My window was so mouldy living in rented accommodation and nothing would get rid of it but I used this and it worked within hours. Couldn’t recommend this more. It was easy to remove with a sponge and the smell wasn’t offensive. It was easy to apply and is a good sized bottle so worth the price.

Our shower is large annd deep and mold grows on the left corners where the shower head is because air circulation is bad. We have had a mold problem for years due to several showers being taken in there every day, the mold could never dry out. I tried bleach, hydrogen peroxide, every type of toxic mold cleaner and it never went away. But it was nasty! So I tried this stuff. First of all, I followed directions to a t! I placed a fan in my shower to really really dry it out. I took the shower brush and scrubbed the dry mold. Then I cleaned it. I dried the whole shower with a towel and let the fan dry it out fully. Then I put on gloves, a mask (you’ll need it- it smells like chlorine!) and eye protectant (just in case, the gel doesn’t splash but there were times when I was squeezing out the bottle that it “farted” and I was glad I was wearing eye gear). The bottle comes with a nozzle that allows you to target specific areas. There is a cap on the nozzle you have to take off. You also have to open the bottle- it’s a foil cover you peel back. Then you point the nozzle at the mold and gently squeeze for the gel to come out. The only trick is not to “scrape” the gel with the tip while squeezing it out- otherwise it moves to the side of the grout and hollows out where you actually want it to go. It took some trial and error to master just having the tip hover above the grout line and not actually touch it, but when I got it, it was pretty easy!!! Then I went to town following all the horrid grout lines. And there were a lot. I’m talking subway tile. I did not have enough of the gel to do the whole thing, but holy cow! You can see where I didn’t put it!!!! I would tap the bottle upside down to make the gel move to the nozzle to make squeezing easier. I used the entire bottle. After I put the gel on, I let it sit for almost 5 hours. It was amazing. The mold was gone underneath the gel. I took a damp cloth and wiped it and the gel had the consistency of dried candle wax and just fell to the floor. I gathered it up and put it in a trash bag. Then I cleaned my shower and let it dry fully overnight. After the gel dries it still smells like chlorine, but after throwing it away there was no remaining smell. I am impressed!!! You can see the areas that I put the gel so clearly, it looks like new tile. Some tips: 1. dry the shower fully!!!!! If the mold is wet, it won’t work. 2. Don’t let it come in contact with clothes! I had a blob fall on my sweats and I rinsed it with water but it left a little bleached spot. 3. Wear eye gear and disposable gloves. The bottle will fart. 4. When I picked up the dried gel, I just held it in my hand and slipped off my glove inside out, trapping it in my glove and creating a little pocket for it to be easily put in a trash bag. 5. Even the gel can stain! I dropped a dried gel in my rug and it left a tiny bleach mark. 6. Be generous with the gel. The areas I didn’t put a lot or did thin lines had some mold spots that did not fully erase. 7. Let the gel sit for longer than you think. I had black slimy mold and I left it there for almost 5 hours. It’s gone!!!! 8. Trust me. Buy at least 2 bottles. You wont regret it. All in all I am so happy to find this product and am already buying more to finish the grout lines. 100% effective.

I purchased this to clean my laundry machine. Thinking that I have already been pretty up to date with the cleaning process - using affresh tablets monthly - I was actually surprised to see that in fact, their was mold in my front loading washing machine. First, I tried scrubbing and wiping it off. This did not work. Second, I decided to use heavy duty cleaners and bleach, scrubbing again. This did not work. Third, I was convinced that this wasn't mold at all, however upon closer inspection, I did notice along the inside of the drum in areas where I would have never thought to look, smelly - stink - and dark gooey matter. I immediately proceeded by searching around online and found this product. IT WORKED PHENOMENALLY AND ABOVE MY EXPECTATIONS! ALL OF IT WAS GONE AND THE WASHING MACHINE NOT ONLY LOOKED AMAZINGILY CLEAN, BUT HAD NO ODOUR WHATSOEVER. Here is what I found works best. 1. RUN a dish cloth in every cranny and try to pick up as much of the loose dirt - goo as possible. 2. Apply the product, but be sure to shake it for awhile first. Then shake some more. 3. You can apply the product using the nozzle, but I found it to be a little inconvenient when trying to use it on areas where the drum is facing upside down. 4. I then proceeded by using a crevice brush and this allowed me to apply more of the gel in areas where it needed to go where my fingers couldn't reach. 5. I left it for 7-9 hours before I cleaned the unit. 6. When cleaning the unit, I again used a warm cloth and to just try and pick up the remnants of the gel that dried and once it look pretty clean, I got it ready for a deep tub clean. 7. I threw in 2 of the Active Laundry cleaner tabs 8. Ran the deep tub clean cycle not once, but twice. Doing it a second time, made sure that there was no chemical left in the drum. The finished result, a clean laundry machine that made me wife smile.

This is the only Mold Stain Remover that seems to work with the mold on my tub sealings! Iʻve tried many and this one does the trick! Tub just needs to be completely dry to apply! Itʻs very easy and pretty quick to apply, but best to wear gloves. There is no smell and I left it on my tub sealings for about 6-8 hours and gently washed off the gel and the mold had pretty much magically disappeared! Great product and would definitely purchase it again! I tried to post pics, but it wasnʻt working! Sorry!

Don't think don't doubt just get it! This stuff works amazingly! I let the gel sit for the whole 5hrs and the mold in my bathroom is gone! There's no harsh chemical smell, all you get is a smell of freshly clean almost like lemon. Make sure you read the instructions first and wear gloves for safety. The product is super easy to work with. I will be buying more in the near future and I will be trying out other product this company has to offer!

I saw this on social media then looked it up on Amazon. After seeing all the raving reviews and the before and after pics, I decided to give the Mold Stain Remover Gel a shot. It really works, people! I had some stain around my tub. This thing got rid off them without me even doing much other cover the stains with the gel then going to bed for the night, and then wiping the areas with a damp rug the next morning and washing the areas. One problem with the product I had - and that's why I'm giving the review 4 stars instead of 5: the pointed cap I received in the box which was supposed to make spreading the gel easy and efficient had no holes. I tried to puncture the top to make a hole, but just couldn’t even with a knife. So I had to resort to squeezing the gel on a butter knife and spread it over the mold stains to cover them. Which was...an interesting experience I didn’t think I'd have. BUT the stuff really works and it doesn’t require any elbow grease at all. Which means, it's very, very strong. And it's VERY strong chemical-wise. So definitely use gloves and protect your eyes. Your space will smell of a bleach/chlorine-like strong smell. It doesn’t last a day or anything, but the smell is strong. So, that's two things to keep in mind. Will I use the product again? I hope no mold returns but if that ever happens, YES 100% I'll use this. I'll also recommend the Mold Stain Remover Gel Cleaner to everyone else! Also, they're a small, family-run business and I really love that for them. The handwritten thank-you card was a really nice touch. I saved it. I actually save the thank-you cards or notes I receive from real people I buy things from. It feels nice!