C6-ITX Black Mini ITX Handled Mesh PC Case, Simple Compact Desktop Chassis, SP MB mini-ITX/Mini-DTX, ATX Power Bite (L140mm Max.), 170mm Tower Cooler,Tool-Free Open SFF Case, Black

A great little case. The layout is very well thought out to make it easy to build in for an ITX case and if you go for a 3-fan cooling arrangement does surprisingly good with thermals while staying quiet. The build quality is better than expected for the price. I also find it looks even better in person than in pictures. I did a spare parts AM4 build in it with an older 6600XT to give to my kid. Potential negatives depending on your build: 1- It only fits a 250mm graphics card and I'd recommend keeping it to 230 or less for cable management. 2 - It's on the large side for an ITX case. This does help with easy of building and air flow, but something to consider.

Great case, solid build, clean installation. Built a case to carry to work, and it’s small enough and strong enough to be moved constantly. Fits everything I would want in it without issue.

I needed something that could be taken with me on plane in the Carry on, and something of this size was great for all of my needs. I put a 3090 3 fan from Dell (deshrouded), and a Noctua NH-D15 G2. PROS: - Amazing build quality, everything is easy to take apart for great build space. Full metal and IO is also better than most along with a solid power button - Easy to manage the internals and build it if you get a smaller GPU and Air Cooler. - INSANE VALUE at only $60, I found that the case was perfect for me at a price about half of my other options. - Great looks. Sleek matte black/grey case allows for a more professional looking build - Best additional screws/washers that I've seen come with a PC case. CONS: - Bags aren't properly labeled for screws, so I was guessing which screws go where. I was totally fine with it because of quality of items, but did mean I had to plan my route of building more. - Like many ITX cases, it requires a lot of planning to build in this case. Especially with almost no cable managing areas for it, it really tried to make me fight to put the GPU in at the end (the Power Supply plugs are attached where the GPU will be, might be better with modded cables). - Airflow is limited in the case unless you have extra fans. The CPU cooler tower doesn't have a lot of room due to ATX PSU. Overall, very satisfied with the PC case, will probably not build in it often due to sanity reasons (or just get smaller components). But nonetheless, it's the best bang for buck PC case that is ITX with ATX PSU for the price.

Honestly, by planning and making sure everything is as small as you can building in this case wasnt all thaty cramped at all. I was able to fit a 120m AIO coller and I was BARELY able to fit an Arc b580. Defintely the biggest things you will need to think about are GPU size and CPU Cooler size. They show these very clearly on the product page though as far as maximum sized the case will fit. It's definitiely on the "smaller" side of sff cases but by no means is it too small. As is always with SFF builds, there is less room for cable management so you will need to think ahead and see where the cables will run before you assemble everything into the case. I was able to get everything neatly organized with velcro straps and zipties but however much that matters to you personally I cannot speak to. All of the panels can be removed without tools, and they align with very small, consistent gaps. Smaller dual fan GPUs will make your life a lot easier for all of that. I think you would be able to fit a dual fan 5070 easily for example, but the three fan models will almost certainly not fit.

This case was perfect for my little Linux server. I have one HDD in it but have room for more if I buy the brackets. Easy to install the mobo, fans, and other parts.

Basic and inexpensive case. Handles large fans and full sized ATX PSU, though SFX PSU leaves more room for air to flow from a larger CPU cooler. Drive mounting was the weakest part of this case. The front SATA drive mount requires PSU removal, and the bottom SATA mount slots require foot and screen removal. NVME / S.2 was difficult on as the case covered the NVME slot from the rear. The carry handle mostly blocks top fan airflow, if you choose to install the handle. I bought 4, and I don't regret it.

It's a good case.

I bought it mainly because I had a lot of spare parts lying around (CPU, GPU, RAM, M.2 SSD). But to my surprise, it really impressed me. I have two other builds with good cases—one with a Ryzen 7000 series and another with a 9000 series—but the compact design of this one ended up growing on me. Aesthetically, I actually like it even more than the others. Just a heads-up: you need to be careful during assembly, especially with the bracket that holds the power supply. It’s made of very thin aluminum and feels quite fragile, so take your time and handle it gently. For the price, I don’t think there are better options out there. Great value overall.