iPhone 8/7, iPhone 6s/6 Screen Protector

I’ve tried at least 12 different screen protectors for my iPhone 17 Pro Max and I must say design wise this is the best looking and best fitting protector I’ve used. It covers every single bit of the screen and I can’t tell it’s on there at all. After installing I wasn’t sure if it was actually on the phone because it’s coverage it that perfect. The black edge like many of these have doesn’t hide any of the screen like most of them do. I can’t speak of its durability as it hasn’t cracked yet, although that’s a good sign. Installation was very easy. The paper instruction sheet was sufficient and watching the video wasn’t needed. Touch works like normal and the anti reflective coating is pretty effective. So far this is the best screen protector I’ve ever used. Only time will tell if it survives a good fall or if the screen gets damaged in the process but so far this is my new favorite and the only one ill buy from now on.

Best and easiest screen protector I’ve ever used. I’ve gone through a lot of cheap screen protectors with the cheap ones. You just think the bubbles are acceptable. This screen protector is amazing. They install is smooth easy fast and free of bubbles. I highly recommend these. Even though they’re a little more expensive they’re worth it.

That’s the best screen protector I’ve ever had Easy installation, covers whole screen, no bulbs

Bought a glass screen protector for my iPhone 6 which I really liked and which was great until I dropped my phone on the pavement and it cracked doing exactly what it was supposed to do - sacrifice itself to save my phone screen. I went to buy the same product again only to find it is no longer available. Did a bit of a search for a new glass protector with the following criteria - 9H hardness, oleophilic (no fingerprints), .33 mm like my last protector, and a hole over the front camera which my last protector did not have, and no more than $10. Quite a few products fit the bill. I eventually chose this product because of the novel application process and some thoughtful extras. So what are the problems with placing one of these protectors? Dust on the screen surface and malpositioning of the glass. This product includes a blue adhesive strip the size of the iPhone screen to be placed on the phone screen just prior to the actual glass protector. This strip lifts any residual dust off the screen insuring a dust free surface. Really nice. Second, the kit comes with 2 adhesive tabs that are placed on the top side of the scree protector at diagonal corners which act as handles allowing one to accurately and easily position the glass over the phone just before dropping the protector onto the phone surface. This was huge. I was lucky with my first protector which had no such "handles" and got it positioned properly but not without a great deal of anxiety. This time it was a snap. No issues at all. Placed the glass protector perfectly on the phone in one try in about 15 seconds. My feeling is every time you have to peel the glass protector up to reposition you risk letting dust in and leaving adhesive marks on the phone screen. If you are a perfectionist like me, you want it perfect in one shot. This kit gives you that ability. Finally I did not look into the thinner (.2 mm and .1 mm) protectors as I liked the .33 mm I had before as it worked well, looked great, and saved my phone. Not sure if the thinner protectors look any better, function any differently, or most importantly if they provide the same level of protection as the .33 mm. Will look into it more if I ever need to replace the one I just installed. Update 12/29/15: Bought this product again as I again cracked the last screen protector after dropping my phone. Once again it perfumed as it should saving my phone screen. This time I ordered a 2 pack as was pretty cheap. The blue dust remover in the new kit is now smaller than the size of the iPhone screen by about 40%. I am not a fan of this change as had to apply the dust remover several times risking dust settling on other parts of the screen while moving the remover from site to site. The trick to applying these screen protectors is cleaning the screen and immediately applying the protector to avoid dust getting under the protector. I have done quite a few of these applications as we have 3 phones on the family. So, despite meticulous care, a dust particle or 2 did settle on the screen resulting in some bubbles under the protector. I believe it was due to having to move the dust remover 3 or 4 times to get the whole screen treated. Not good. Pulled up the screen protector and tried to remove with the dust remover but once there is dust under the protector it is exceedingly hard to get it off. I eventually did get the dust out but then the screen protector no longer sealed to the phone screen on one corner so had to trash the protector. As a result, I had to use the second protector. This time I used an old FULL screen dust remover I had put away from a prior purchase and immediately laid down the screen protector without issue. Looks great and touch control of the phone is perfect. So in summary still a great product but I take away 1 star for the reduced size dust remover. Update 1/13/16: Emailed the company I had an issue with laying down the first screen protector and had to throw it out. They immediately sent me a replacement. 5 star service!!!! They stand behind their product.

Very high quality Follow the instructions on the video and you’re set at ease.

This is the first glass protector I've tried. I've used a number of different brands of plastic screen protectors and this seems superior in almost every way. Pros: 1) Overall, it was much easier to apply than plastic with far fewer bubbles. The kit that comes with it to perform the install is well thought out. 2) The edges won't bend up at all if you have to lift it up to release an air bubble 3) Feels smoother than plastic (fingers glide easily) and seems to have an oleophobic coating) 4) Fit is as good as it can be (no protector can cover the curved parts of the screen) 5) All cutouts are present and sized appropriately 6) Offers more protection than plastic and should not scratch as easily (should last much longer) The two cons so far: 1) the edge of it is a little more noticeable, apparently due to the thickness of the glass which just can't get as thin as plastic, and 2) it's harder to lift off the screen if air bubbles appear (bubbles are easily avoided if you just control the rate it adheres from the top to the bottom or vice versa). I'll edit this if I run into any problems. 4/19/16 Update: This protector has served me well. I'm on my second one and just dropped my phone the other day and chipped the protector with no damage to the phone. It does tend to show scratches over time, but I'd expect that of any screen protector and these are easy enough to replace yearly.

So far so good! I run heavy equipment and constantly breaking screen protectors to the toon of a few each month! And so far this has been holding up very well! But time will tell and super easy to apply

Buen protector. Han diseñado un accesorio para su colocación y la verdad es que siguiendo bien todos los pasos, el protector queda perfecto. He comprado anteriormente de la misma marca para otros dispositivos y todos me funcionan genial después de varios años de uso. En esta ocasión vienen 2 unidades y viendo el historial y la duración de los otros que tengo, es posible que no llegue a utilizar la segunda unidad. Recomiendo este protector.

Korzystałem z wielu szkieł JETtech, to jest tragiczne, bąbelki nie znikają…

Le kit d’installation est vraiment très intuitif et précis, il permet de mettre en place le verre en toute sérénité. Le verre trempé en lui-même épouse parfaitement la forme de l’écran compatible avec la grande majorité des coques de protection sans aucun problème. un léger côté anti reflet qui fonctionne assez bien. J’avais peur que les bordures noires du verre trempés viennent à dissimulé une surface d’affichage de l’écran comme ce qui se passe avec la grande majorité des verres trempés ayant une bordure noire, mais ici aucun problème, ce qui est très appréciable.

Ne correspondait pas à mon iPhone 8. De plus quand on met l’écran en verre le tactile ne fonctionne plus à certains endroits.

Excellent product, very easy to fit if you take your time and read the instructions! This is my second one of these on a second phone and both have applied perfectly and bubble free. The first had been on a phone since April and it is still in perfect condition. Your screen on the phone HAS to be 100% dust free and clean before you go for the application, you really only get one chance. All the 'stuff' you need to do this are supplied so there is no excuse for not getting it right, don't try it on a beach, desert or inside a bakery :) Choose a still quiet dust free room and you should be fine. Use the holder tabs supplied to hover the glass closely over the screen to get perfect alignment, use the speaker and home button cut-outs as your main guides then gently lower it down. Once it touches you are pretty much committed. A gentle press on the middle and you'll see it adhere itself to the phone like magic. Check round the edges that full contact is being made and that should be it. You do get a faint ridge all the way round the edge about 3mm in but it's pretty smooth and I've not found any problem with dust or debris getting in there, it's the best that can be done with the curved glass of the iphone.