Orion Motor Tech Transmission Fluid Pump, 3L Transmission Filler Pump with 12pc ATF Aluminum Adapters, Manual Transmission Fluid Transfer Pump with Pressure Gauge, Transmission Dispenser Oil Pump Tool

It worked well, no issues.

Worked well. Lots of tips for fluid dispensing. It does take ALOT of pumps to build pressure especially when almost empty but thats just how it is. Get one for shop air in that case. The gasket for the fill is not captive so you must be careful when closing or else will spill all over or loose pressure. This tool is cheap, the spring loaded quick connect has hair trigger and tip can fly off! but worth the money so good value.

makes life easier wish I bought one sooner worth the money and no frustration.

It feels quality and had plenty of adapter tips. It also seems to have silicon tubing rather than plastic tubing. I think this is one of the best features of this tool/brand. Plastic clear tubing is tough to work with as it has memory and they are far from flexible compared to silicone hose at all temperature. Only complaint that I have is the speed at which this expresses the fluid. It will get the job done but it sure does take time to empty its canister.

Works fine - but as others have mentioned - get ready to pump like crazy. It takes a lot of time and effort to get the 3l container to empty. My fix? Add a Schrader valve to the fill cap and connect it to a compressor! Works like a champ and fills your transmission in under a minute!

Used this to prime my new 5.3L with 30wt oil. Worked like a champ. Put in over 4qts of oil with all 16 lifters showing good oil flow. Only pressured the tank up to 30-40 psi. Easy peasy

War god Easy to work

It would be hard to express how angry I am at the poor quality of one of the adapters to fill the transmission. If you look at the main picture, you will see a curved adapter with a little brass fitting in it. This was the one that fit on my son's Tacoma and the curve is what was needed for the tight space. However, when I attached it and started pumping fluid in, it was leaking down the side a lot of fluid. When I removed it to try a different fitting, the brass fitting was missing! That's right, it shot it into the transmission!!! I tried to get a snake light in there to find it without success. I had to drop the transmission pan to see if there was any chance I could locate it...no luck. So my option is to risk that it will not do any damage or have the truck towed to a shop to have the transmission and transfer case dropped and pulled apart. Decided to risk it causing damage and so far nothing has happened, but again, you cannot imagine how angry I am at the poor quality of this unit's accessories. If something happens to this transmission, they WILL be hearing from me.