QualGear Pro-AV QG-KIT-CA-3IN-W Projector Mount Kit Accessory Single Joist Ceiling Adapter, 3" 1.5", White

I made a rookie mistake when preparing the area where my new projector would end up hanging from the ceiling - I measured from the CENTER of the projector instead of where the lens would be. That made the projection a few inches smaller than I wanted. (I also mounted it a foot closer to the wall than I should have, but that's another story.) Easy fix with this mounting bracket! I just adjusted all the brackets to push the projector as far back from the center as I could. Major kudos to the engineers for making this so easy to use and install as well. I thought I was going to need one person to hold and another to tighten, and I was wrong. Loosen one screw, then you can pull the entire bottom part of the bracket and projector out together very easily by yourself. Bravo!

Built well and easy to install. Easily holds our large projector.

Great mount. Extremely sturdy. I mounted it with an Epson 5050UB. I definitely recommend it. The only down side is the screws use a proprietary allen type that has a nipple in the middle so you have to use their tool unless you have that specific type. Also the screws aren't the best. I broke two just tightening normal. And 2 others stripped with normal tightening as well. If they can come with better screws, I would give it a definite 5 stars.

Very sturdy mount worked well with my epson projecter

I was having a hard time finding a mount that would work with the Epson 5030UB as its mounting screws are very far apart but this mount was so versatile I had no problem adjusting the arms to fit the large projector. I especially like the Mounting Bracket cover which hides the bracket attached to our wood beam ceiling. The tube was just large enough to run and conceal the power cable and the HDMI cable. The Adjustment options were also nice including tilt forward and back and side to side. I purchased the optional pipes to make the drop from the ceiling almost 14 inches. The appropriate height for the height of my screen location. It comes with logo stickers on the pipe and the bracket cover but I was able to easily remove these branding stickers, making the unit look clean and modern. Its solid and comes with additional small screws to lock in the drop pipe so it doesnt turn left or right. Mounting the projector bracket to the pole was easy based on the design. I was able to lock all the screws down and everything is snug, I dont have to worry about the projector moving in the future and this is important as I spent a bit of time aligning the projector image perfectly to the edges of my 127" screen. It was a bit pricey compared to the other options, but I'll gladly pay a bit more for functionality, compatibility, stability and build quality. This met all my expectations.

I was looking a flat ceiling mount that I can install for my 26 lb Epson 4010 projector. Glad I bought this product over a bunch of cheaper versions out there. This product is very sturdy, with easy installation setup, and clear instructions, it took just an hour to install. The best part is it comes with 4'' x 2'' plate that would easily fit wooden joist beam (which is a big plus over 4' x 4' base plate installation). Just takes 2 solid bolts that would go in joist. There is a paper stencil that was handy to mark and install plate. Once base plate is installed, the rest of assembly was a breeze. The mount is very sturdy, good heavy metal to hold project weight. The top adjustments was easy to manipulate tilt to get a straight projected picture. Once mounted projector can be rotated 360 degrees. The cover over base plate worked out well to hide hdmi and power cables, it is not too big though, there is a decent space between projector and mount, that worked out to conceal cables. Overall it seems to be very sturdy projector mount.

Its a great quality and well built product. I have a 28lb projector and needed a sturdy projector mount. This definitely is highly recommended to go for. I has great flexibility in terms of compatible to projector sizes, (extensions), rotation, etc. The very fundamental is its strong and sturdy... so one for the lifetime. Highly recommended. In my case I would appreciate the Amazon customer support for their considerations towards my request to expedite the delivery for free of cost. I had the person coming over to mount this and i requested for an expedite in delivery.... they made it happen. Thank you for that.

Works great. Easy to install - incredibly sturdy. All kinds of axis adjustments are possible. The telescoping arms can accommodate a wide range of projectors. Installation instructions were easy to follow. All of the miscellaneous hardware was bagged and tagged and easy to ID. Solid construction. Would order another in a heartbeat.

This mount is great! It covered all the existing holes, and is extremely sturdy! The cover near the ceiling is great for cable management, and the fact that I "hung from the ceiling" to test the weight capacity is just amazing! (I weigh ~200lbs). The brackets can be easily lined up with one of the many mounting holes on the projector, and the center-of-gravity is easily adjusted as well by extending or shortening the arms.

I strongly recommend this. It is easy to set up, strong and well made. The instructions are good and it comes with a good range of fittings (most of which you won't need) to make sure it suits all situations. It also looks quite good once installed.

Easy to assemble with great adjustment options which are critical for any projector mount, particularly the ability to adjust the horizontal level to get the image lined up perfectly on the screen. My last mount didn't have this and it drove me nuts. Very happy with this unit

It is a bit heavy, needs a good support structure(studs) rather than simple dry wall. Looks nice and very easy to fit the projector to the mount. Clear instructions and easy to install.

Easily paired to Epson LS-11000 laser projector. Fine screen adjustment bit fiddle but not a problem. Looks great, solid build.