PUTORSEN 17-49 inch Premium Aluminum Heavy Duty Dual Monitor Arm for Ultrawide Screens up to 44lbs, Vertical Stacked Dual Monitor Desk Mount, Full Motion Dual Vertical Monitor Mount, VESA 75/100,Black

This monitor arm is impressively sturdy and feels very well-built, especially for supporting larger or ultra-wide screens. Installation was straightforward and didn’t take much time, even without prior experience. I also like that it works perfectly fine for a single monitor setup, which adds some flexibility if you’re not using both arms. The adjustability is excellent—you can easily position your monitors exactly where you want them, and everything stays in place without sagging. The only downside is the desk clamp design. It uses a single screw to secure the mount, which concentrates pressure on one point and could potentially damage or dent your desk surface over time. Adding a protective pad or using it on a sturdier surface is probably a good idea. Overall, a solid and reliable mount with great performance, just be mindful of the clamp design.

I found the product to be of high quality and fairly easy to install. If you can assemble IKEA furniture, you can handle putting together this dual monitor setup although you may find the instructions comparably frustrating to what comes with that IKEA furniture. I recently purchased a 2nd 32" Dell monitor and wanted to operate dual monitors on on my desk. They were not the same model and had slightly different factory stands so they screens didn't line up perfectly. I also wanted to be able to rotate one of the monitors around so that someone sitting across from my desk could view a screen. Each monitor weighs about 23 lbs so I didn't want to purchase something that was barely rated to handle it. The PETROSEN HD monitor stand seemed to fit the bill pretty well and I'm happy with the purchase after getting it setup. INSTALLATION: The instructions that come with it are almost completely based on diagrams with very little written instruction. That being said, the instructions are fairly intuitive and they only had me guessing a few times. I chose to drill a hole through my desktop as I felt that mounting option would be the sturdiest. Fortunately I was able to drill a hole once and make it work however the base of the mount is about 3" deep x 4" wide so it would conceal mistakes if you needed to relocate it a few inches in any direction. I did manage to brake one of the plastic pieces that helps hide the wires on one of the monitor arms but I may have been able to avoid that if I paid closer attention to the diagram in the instructions. I spent just as much time trying to figure out out how to remove the factory stands from my monitors before attaching the mounting plates to them. The package comes with two Allen keys to do most of the installation steps however I'd recommend also having a Phillips head screwdriver on hand for the assembly. OPERATION: After installation, I had to make very little adjustment to get the monitors aligned and they are holding their position well. It accomplished my goals of aligning the screens while also allowing me to rotate one around for someone sitting opposite my desk. I also have them elevated a little more than where they were positioned with the factory stands which also has freed up some desk surface. OVERALL THOUGHTS: This is a well designed dual monitor stand that can handle some large and heavy screens. It did cost more than several of the options I looked at but they are well built and I don't have concern that my monitor arms will sag our worse yet, topple and cause damage to my monitors. If you are looking for a high quality dual monitor stand, I believe you will be very happy with this one.

Nice dual monitor arm. The quality seems good and the instructions are clear enough (think Ikea furniture instructions). I'm using it with dual 27" monitors (horizontal) and it seems to hold them up as expected with no adjustments. They move nicely and the quick-release monitor attachment is very nice. What is odd is that they seem to have had ideas of routing cables through the base but they abandoned that idea. There are two small holes on either side of the base and additional holes at the back; so you can route a small cable (from the back out the side) through one or both sides. I ran a USB-C cable through the back and out one side to attach to a USB hub to sit right next to the base. This isn't a huge bonus, but it is unexpected and completely undocumented. There is also a small plastic tab on the top of the base that they also had ideas for...you may be able to make use of this one too. The description of the product says "the base has no USB/Type-C ports—holes are decorative only: so they are clearly telling the buyer that you can do what you want with these mysterious holes, but they aren't advertising anything. I'm thinking an engineer went rogue and got shut down by the accounting department. Pro-tip - before you mount the arms just remove the cable guides to see how they work. They aren't complicated but if you already mounted the arms like a monkey with a mission (i.e. me), you will have to spend a few minutes playing with them to figure out how they slide out (they slide length wise). It's super easy once you know. The cable guides feel flimsy but they work. I'd prefer metal guides.

Questo supporto é piuttosto semplice da montare nonostante le istruzioni striminzite. Le chiavi a brugola necessarie al montaggio, inoltre, sono incluse nella confezione, quindi non c'é bisogno di altri strumenti. Una volta montato il supporto e installato sulla scrivania, i miei due monitor da 27", 4K, sono perfettamente stabili e facilmente spostabili/ruotabili. Ovviamente ci sono delle viti di serraggio che devono essere allentate o serrate se si vuole dare maggiore stabilitá all'insieme, specialmente con monitor pesanti che possono far abbassare i bracci. Tali viti fungono da "frizione" e da blocco. Naturalmente questo significa che il movimento dei bracci non sará libero al 100% nella maggior parte dei casi, ma onestamente non credo che sia necessario cambiare il setup con frequenza, una volta trovato il piú adatto ai propri scopi. Nel mio caso lavoro con i due monitor ruotati a 90 gradi, e affiancati sul lato lungo. Ho liberato un sacco di spazio sulla scrivania e finalmente posso avere i monitor all'altezza che voglio e nella posizione che preferisco. Consigliato.

Ottimo, robusto e versatile

I have 2 x 35.5-inch widescreen curved Samsung 4 K monitors. You might get 2 x 36 inches, but no more, if you want side-by-side. The arm works to allow side-by-side. Super sturdy and well-built. The arm supports the weight and is adjustable. These monitors are heavy. It is effortless to assemble and easy to adjust to the correct weight tension; the tilt tension is super solid and adjustable as well. Cable tidy is super handy, and the desk space is free now, which makes this super worthwhile. As I am greedy, I also have 2 x 36 LG 4ks at Home, so I may get another arm for home as well.

Fazit: Absolut empfehlenswert für alle, die ein vertikal gestapeltes Dual-Monitor-Setup realisieren wollen. Die Halterung ist extrem stabil, hält meine beiden großen 32-Zöller bombenfest und die Gasfederarme machen die Höheneinstellung zum Kinderspiel – ein Riesengewinn an Ergonomie und Platz auf meinem Schreibtisch. Die Montage war dank der Schnellwechsel-VESA-Platten überraschend unkompliziert. Einzige winzige Kritikpunkte: Die Feinjustierung für wirklich perfekte horizontale Ausrichtung der Bildschirme zueinander erfordert etwas Geduld, und der mitgelieferte Inbusschlüssel zur Gasfedereinstellung könnte etwas handlicher sein. Trotzdem ganz klar 5/5 Sterne! Rezension: Nachdem ich wochenlang mit den Original-Monitorfüßen auf meinem Schreibtisch gekämpft hatte – null Platz und der obere Bildschirm war immer zu weit weg und zu niedrig – musste eine Lösung her. Ich arbeite viel mit Code und Dokumenten, weshalb ein vertikales Setup für mich ideal ist, um den Nacken nicht ständig seitlich zu verdrehen. Die Wahl fiel auf diese Halterung von PUTORSEN, weil sie explizit für das Stapeln von zwei Monitoren ausgelegt ist und laut Beschreibung auch das Gewicht meiner 32-Zoll-Geräte locker tragen kann (jeder wiegt knapp 7 kg, also weit unter der angegebenen maximalen Tragkraft von 20 kg pro Arm). Die Montage – Einfacher als gedacht: Ich war ehrlich gesagt etwas skeptisch bei der Montage, aber ich wurde positiv überrascht. Die C-Klemme für die Tischbefestigung (habe diese Option gewählt) ist massiv und hält bombenfest an meiner 30mm dicken Schreibtischplatte. Die Schnellwechsel-VESA-Platten sind ein Traum! Man schraubt die Platte erst auf den Monitor und klickt ihn dann einfach in den Arm ein – das spart unglaublich viel Gefrickel beim Anheben der Monitore. Innerhalb von 30 Minuten stand die Halterung und die Monitore hingen. Ergonomie & Flexibilität – Der Game Changer: Das ist der Punkt, der mich am meisten begeistert: die Beweglichkeit. Endlich kann ich den oberen Monitor auf eine angenehme Sichthöhe einstellen, während der untere optimal auf Armeslänge positioniert ist. Die Gasfedern funktionieren zuverlässig und lassen sich mit dem Inbusschlüssel perfekt auf das Gewicht meiner Monitore einstellen. Das Verstellen der Höhe, das Neigen und das Schwenken geht butterweich und hält dann stabil in der gewählten Position. Ich nutze den oberen Monitor oft zum Hochformat für lange Dokumente – das Umstellen ist dank der 360-Grad-Drehfunktion ein Kinderspiel. Rücken und Nacken danken es mir jetzt schon! Kleinigkeiten, die auffallen: • Pro: Design und Material: Die Konstruktion aus Aluminium und Stahl wirkt sehr hochwertig und robust. Die integrierte Kabelführung ist dezent und hilft wirklich enorm, das Kabelchaos hinter den Monitoren zu bändigen. • Contra: Feinjustierung: Was ein bisschen Fummelei ist, ist das perfekte Ausrichten der beiden Monitore nebeneinander auf der Stange. Wenn man sie nicht stapelt, sondern horizontal nebeneinander hätte, wäre das einfacher. Bei meinem gestapelten Setup musste ich ein paarmal nachjustieren, bis die obere und untere Bildschirmkante exakt parallel standen. Es ist machbar, braucht aber Geduld. • Neutral: Werkzeug: Der mitgelieferte Inbusschlüssel zur Einstellung der Gasfeder ist funktionell, aber ein ergonomischerer Griff wäre für das Feintuning schöner gewesen. Insgesamt hat dieses Produkt meine Erwartungen voll erfüllt und meinen Arbeitsplatz massiv aufgewertet. Nie wieder wackelnde Original-Standfüße!

Stabila, helnöjd!