Lytool Bolt Extractor Set, 13-Piece Nut & Screw Extractor Kit, Impact Lug Nut Remover, Broken/Stripped/Rounded Bolt Remover, CR-MO Steel, for Car Repair & Mechanics

I was giving my car an oil change for the first time and the mechanic I use must have tightened my drain plug way to tightly. I could not get it off after trying everything. I bought these and put it on a breaker bar. The drain plug came off after about 5-10 seconds of pushing.

The media could not be loaded. I have 69 Jeep pickup that sat under trees and in the bushes for 20 years. Everything is rusted and rounded off. I needed to remove some bolts that slipped in the sockets. I tried these bolt extractors. I hammered on the extractor and then used my impact to try to remove the bolt. The bolt didn't come off and the extractor didn't slip. It held tight. I couldn't see any change in the extractor, but the bolt head had grouves in it. It worked as expected. I think that I will have these around for a long time because they seem indistructable. I will try them with my half inch impact and see if I can get the bolt out that way.I love the case. It keeps everyting in place even when you shake it while closed. the slide closure is great. There is a plastic cover to keep the display of sizes clean (I glued it in place).You won't be disapointed if you buy this

Working on old pieces of equipment be it cars, motorcycles, bikes, or even just old A/C units, every so often you have a stuck bolt. You try to impact it off you try heat, you try concussion, and during these attempts you round off the bolthead. SO, what to do next, Well i ordered a bolt extraction kit from amazon, and i use it to get a purchase on the rounded bolthead (this one was on a rusted control arm i needed to replace) i had soaked it in PB blaster and then Bam! i impacted it off using the extractor. These seem to be a bit more aggressive than what i am used to, which is not a complaint by any means. I knocked it on the bolt end (using a hammer of course definitely not the end of my ratchet) and really got it on there. the only downside is i have to use a punch to knock the bolt out of the extractor when i was done, no big deal. Would recommend and i am happy with my purchase. (i have used about 3 different sizes so far and each one was bit into the bolt perfectly and has done exactly what i neede it to do)Would buy again if i ever lost this set.

Descent enough for the price. Did its job on one bolt but wouldn’t expect these to last s long time.

I only needed one size, worked well, able to remove oil drain bolt with little effort. Follow instructions

Good quality steelWork as expectedUsed every day on stripped bots with Allen head bolts the Allen hole stripped used these tools to removed screws with strip head.Must For Engineers, Automotive technicians or MachinistsSaved time/ Instead of speninf hour drill & extracting other spirrol extractors or square head extractors; these extractor took me only seconds with impact wrenchThey nicely came in a plastic storage box

I wasn't impressed. I have used similar tools in the past, so I'm not a novice with these things. This stripped out along with the bolt head. Made things worse AND become worthless. Returned it for a refund.

Very good product. Grips bolts and allows torque to extract!