BR1000ELCD-UK BRICs Series, 1000VA/600W, 6 UK Outlets (3 Surge only, 3 UPS and Surge), 1 USB Charging Port, AVR, Brick Format

I bought this UPS because I was having occasional power cuts, and since I work on a PC (and sometimes game), it was becoming a real problem. My setup includes a PC with an 800W power supply and two monitors. When the power goes out, this unit gives me enough time to save my work, finish what I’m doing, or even quickly wrap up a game. In my case, I usually get around 10–15 minutes, which is more than enough for what I need. It has multiple outlets, and a few of them provide battery backup, so I can connect all the important devices without any issues. There are a couple of things to keep in mind. When it switches to battery mode, it makes a noticeable beeping sound, which might be a bit loud for some people. It’s also fairly large and heavy, so you need to have space for it. Overall, I’m very happy with it. It does exactly what I expected and gives peace of mind during unexpected power cuts. Definitely a useful addition if you rely on your PC for work or gaming.

Style Name: 700VA/420W Decided to buy UPS after recent experience of a power “brown-out” where the power fluctuated enough to cause devices to power up/down multiple times – not good for NAS (Network Access Storage) devices. I decided not to “sell myself up” with regard to power spec and try the lowest power output that would comfortably meet the needs of a clean shut-down for my NAS, hence 700VA version. Brick comes with a type-B USB cable for connection to a NAS. This enables the NAS to monitor the state of the UPS and determine if/when to start setting disks to standby. In my case I have a Synology DS212J NAS (quite old tech) but it recognises the UPS when connected and you can customise a delay time before placing the disks of the NAS in offline/standby mode. There are three sockets in each of two banks. One bank is Battery Backup+Surge Protection, the other Surge Protection only. It also provides a USB power output port and RJ45/RJ11 sockets in between the mains socket banks. I keep the protective packing film attached to stop dust entering these since the “brick” faces upwards in my installation. Although the brick has keyhole slots cut in the base for screws mounting vertically on a wall, I feel it might be safer (because of its weight) sitting on its feet in the horizontal position. I found the actual mains sockets quite stiff for inserting UK plugs, but since plugs will seldom be removed/inserted this is a minor criticism. Brief instructions were included on the box and a leaflet inside. Once the unit is switched on there is a second button to allow scrolling through the settings shown on an LCD display. The display cycles through power input Volts, power output Volts, charge remaining etc. Testing is simple once everything is connected. Switching off the mains supply to the unit, connected devices should continue to run undisturbed. A double beep sounds at intervals alerting that the mains power is cut and the unit is operating in backup battery power mode. Online advice seems to recommend not discharging the batteries too much. So the UPS is more suitable for allowing clean shutdowns than enabling continued use of devices during a power cut. If the latter is required a larger UPS would be needed. I feel a lot happier about protecting my backup data now in the event of any future power interruptions. “Fit and forget” tech once it is setup. Pleased with my purchase.

In common with most UPSs listed here, the runtime on battery isn't stated in the item description. I bought the smallest (420W) of these devices and at full power I'd expect 5 or 6 minutes of runtime. Enough for an immediate clean shutdown but not much else. As it happens, I bought this to protect my broadband and some other small items (smarthome hubs and a couple of raspberry Pis) so I'm mostly running at about 10% capacity and would therefore expect this to power everything for maybe 50 minutes. Long enough to keep going through the average power cut. Aside from battery capacity this seems like a decent unit. Plug it in, plug equipment into it, and off you go. The USB interface connects nicely to a Windows machine and the software lets you perform a clean shutdown when the power goes off. I actually have mine connected to a Pi Zero running Network UPS Tools, with the monitoring data fed into Home assistant. NUT lets you schedule shutdowns as you need, if you don't mind Linux-level config file hacking, and home assistant provides nice monitoring of power consumption and estimated runtime on battery. Overall I like this unit. There aren't many cheaper devices and there are a lot of more expensive devices, so this seems like good value for money to me. I've only had it for a few weeks so can't yet comment on long term reliability.

Arrived with a dead/dying battery. The display showed that the battery was 90% full after charging it for a few minutes (which is odd as the manual says to let it charge for up to 8 hours), however, the UPS would only last a few seconds after shutting off the socket, or in some cases shut off immediately and not turn back on while playing a constant loud pitched noise. This means that either: - it arrived with a dead/dying battery - the battery display is wrong Either way, I can't trust this UPS. Also, this is advertised as working on Linux, however, PowerPanel doesn't work on Fedora 41 (just shows "No such file or directory", and starting the pwrstatd service fails). I understand that Linux support is pretty much always flaky and there are a bajillion distros, but don't have high hopes if you want automatic shutdown on Linux.

Works a treat

Preso da un reso in sconto da 185€ a 85€ il prodotto ha manifestato problemi non si accendeva anche dopo le 8 ore di ricarica consigliate ho contattato l assistenza Amazon dove le varie procedure il prodotto ha continuato a non funzionare arrivato ieri e reso a malincuore oggi non capisco perché Amazon oltre ad accertarsi se il prodotto non mostra cadute e se è sono presenti tutte le dotazioni del apparecchio non ne testa il funzionamento peccato perché era veramente un bel prodotto