Dash Cam Hardwire Kit, Type-C Full Set Hard Wire Kit Fuse, 12V-24V to 5V Dash Camera Car Charger Cable Kit, Low Voltage Protection, LED Indicator, Double-4 Fuse Cable and Installation Tool

*This is review is by Niall* After having a frustrating time with my last dash cam due to phone connectivity issues, I was looking for something easier, a plug in and record device as opposed to trying to connect it to a phone first. Searching, browsing and even more browsing and with so many other dash cams on the market, we're certainly spoiled for choice. Until I saw the Pelsee P10 Pro 10" 4K Mirror Dash Cam. A simple plug in and play set up. Exactly what I wanted. But not only that, they have safety systems built in, which I was impressed with and hadn't seen it on any others..at this Pelsee price too that is. Affordable but not breaking the bank. These safety systems were for Advanced Driver Assistance System and Blind Spot Detection. After installing it over the rear view mirror, the rear dash cam is certainly sturdy and not going anywhere. The straight forward setup up of settings, correcting the time, turning the safety systems on or off and calibrating the sensitivity of it. A breeze to do. Having now used it for a solid month I certainly do feel so much safer behind the wheel knowing if ever I'm in an accident, the Pelsee rear view dash cam has me covered at the front and the rear. It detects people and other cars swiftly, with beeps letting me know if there's a car coming up behind me left or right. With brilliant 4k resolution on both cameras BUT drops slightly to 2.5K at the rear cam if the safety features are on. Don't worry, that's still fantastic clarity to view the footage in. I did have queries though, I didn't like the fact that it automatically started recording as soon as the dash cam turned on, I felt it was wasting footage before I even set off driving so I asked if there would be an update in the future for disabling that or have a setting where it would start recording when the car is then in motion. Query 2 was that on the split screen for front and rear, would it be possible to switch the rear view to the left and the front on the right, I felt it'd be easier for my eyes to quickly see behind if it was closer to me. That may have been a more personal note I had but I was assured by Helen in support that it'd be something they'd look into. So yes, they are taking notes of any issues we have to then maybe update them in the future. I did however run into an issue viewing the files on a desktop. The third party app for viewing it wasn't wholly compatible. An email to the ever helpful support of Helen guided me in the right direction. Apparently I had to slightly change each file name on the front and rear video files then I was able to view both video displays simultaneously. Happy days. Another hiccup I discovered was that when it's raining, the rear lens gets quite fogged up and misty making it a little difficult to see behind. It's just a big blur of lights behind you with no outline of cars. I'd suggest to maybe invest in a lens protector for that rear camera..or a camera shield. Maybe something Pelsee could include in future packages? With this unknown to me brand, originally, I wasn't sure about buying but after other stellar reviews, now knowing it's a quality product and well designed and researched, easy to set up and absolute reassurance that Pelsee has me covered when out driving, I'm delighted I purchased this rear view dash cam.

Product works yet difficulties with the 2003 BMW 325ci e46 fuse box due to numerous issues with BMW's odd fusebox. I added a few images on how to align the plugs. ACC (red) wire into #4 Positive (yellow) wire into the lower row under #10 This allows the pelsee12pro to turn on/off with the ignition and when it's off, (set to g-sensor/low) will record locked video (front&rear) and save them in the locked folder... the unit never turns on but it did record my tests, so it was on...just no screen and it does have the bootup/bootdown logos when I turn the car on/off..so it stays off but in some sort of wizards eye state. I will be monitoring the battery level to see if it drains too much or if the BMW will learn it's draining power and turn it off completely (bmw does this). The ground wire went to an existing tiny hole by the passenger right foot (behind plastic/carpet) and I needed a tiny metal screw and washer. The only thing that would be helpful is a lead wire or something to help fish the wires through the headliners and down pillars for a truly stealth installation. Beginning to end took me about 3 hours for pulling front curtain air-bag covers, removal of sun-visor, part headliner, sanding the paint around the ground point, finding a good screw+washer, and running the wires... Figuring out which fuse spots to plug into wasn't easy b/c BMW has many that will stay on for 5 minutes to 2 hours and shut off, and that's not in any users manual. The USB part feels like quality and snaps into the pelsee12pro tightly without any wiggle, so that should be good for years since it can stay where it is. The rest of the connection points look and feel good too. Overall seems like a quality product. During the installation, I was a little rough and it held up without any issues. Highly recommended if you want your pelsee12pro cam to turn on/off with the ignition and also be stealthy recording when the cars parked and left unattended.

I was very impressed with the Pelsee P12 Pro, so I opted to hardwire to free up my cigarette adapter port and take advantage of the Parking Monitor. Install came with everything I needed and I was able to easily identify constant power and ACC using an LED lighted power tester I had. I set the power cut-off to 12.4 to ensure my car would not have any issues with a low battery, set the time lapse to 1 sec intervals and record duration to 24-hours. On start-up, it powers on the screen almost instantly since it is already powered in time lapse mode and switches the recording to normal mode automatically. When you power down the unit, the screen stay on for several seconds and alerts you with a pop-up message that it is going into time lapse recording, then the screen powers down. the next day I checked out the footage and it recorded the entire night on both front and rear camera. Someone claimed it doesn't work for dual cameras but this is not true. The time lapse recording was saved for front and rear camera under separate files. Make sure you power the power cables correctly. I initially put the constant power on the red wire and ACC on the yellow wire. That will only power on the unit but shuts off when you turn off the car. I realized my mistake quickly and swapped the wires. After that it has worked flawlessly. Love it! * I didn't have a good bare ground option so I just added my own with a self tapping screw (see photo)

Excellent pelsee dash can hardwire kit, allows permanent hardwire and use park function to record when parked.

My first attempt at hardwiring a dash cam in my 2024 Ranger Raptor with this kit and a Pelsee dashcam was fairly straightforward and the kit came with everything I needed! I'll certainly hardwire any future dashcams for the rest of our vehicles when we upgrade cams! Definitely recommend this kit and look up YT videos if you aren't very tech savvy like myself! It's not that complicated!

لا تعمل بالشكل المطلوب

コネクタが干渉する旨をレビューしたところ、早々に連絡がありサポートして貰えました。 ヒューズボックスとその表記の写真を送り、干渉しないで使用出来るヒューズを教えて貰えました。 取説では10Aか15Aとの記載があった気がするのですが、5Aと10Aでも問題ないみたいです。 ---------- 工作精度は良い感じです。 ケーブルもしっかりしていて、マニュアルもわかりやすいです。 コネクタも形状違いで複数入っています。 が、コネクタの形状がいただけない。 なぜこの作りにしたのか。。。 車のヒューズボックスや場所にもよりますが、周りと干渉してまともに取り付けができないです。 コネクタ部分はもっとシンプルな作りにして欲しい。

Can I send the same QR from the shell to the post office? Because from the shell they don't work. They said the machine doesn't work