Digi-Pas 2-Axis Smart Master Precision Level DWL1500XY Bluetooth, 0.0002"/ft (0.02 mm/M), Black

This is a must for any engineer. It will save hours of valuable time.

I had no problem setting up the level with their android app - make sure to download the free version and then unlock. The quick-start instructions could clarify that point. Calibration is a snap, and for me, the Bluetooth interface is terrific. I'm mobility challenged, and it's great to place the level and view the results on my phone. I am primarily using the 2-axis function. I'm still using my Wyler spirt level 53-422-525, but this new addition is very usable, and as time goes on, I can see it replacing the Wyler as my confidence builds. Two comments, it would be nice to include the manual or at least make reference to the manual being available at their web site, and the display on my unit blinks off when connected via BT — assuming that's by design and not a problem it would be nice to have the option to run both at the same time. Not a deal-breaker, but it would be nice. I would buy it again.

I had done enough research before I purchased this product so I knew exactly what to expect from the product. I had a few I could have chosen from but I chose the Dig-Pas DWL1500XY because of the other customer reviews and price compared to the other similar products. The packaging/case for the level is great to keep it safe when not in use. The app set up and initial instructions where easy to follow. The product itself appears to be well built, solid and easy/simple to use and read from its own display if one does not need the app. The app and bluetooth feature allows me to make adjustments away from the level itself by looking at my phone display. I would recommend this to buyers who know how to set up equipment that work with apps. You can still use the level (with limited functions) without the phone by reading from the display on the level itself.

Great tool that has made field service work so much easier. Have had multiple customers go out and purchase their own when they've seen it in use. Would purchase again. Only flaw is the plastic body, customer dropped a tool on the level and the shell cracked. Still works though so I'm not going to complain.

The Digi-Pas DWL1500XY is very accurate and easy to use. It makes it much easier to level equipment not having to have two people or going back and forth looking at a bubble. The app is easy to use and only takes a few minutes to set up. Our company sets equipment daily and everyone loves the Digi-Pas!

Good device, suitable for roug leveling. The "calibrate" function in the app averages its values unless you "calibrate" the device on a calibrated surface there will more error than the devices window of error. I require precision when installing CNC machines after rough leveling I have to do my final level with a mitutoyo spirit level. It is not a bad product at all. It certainly gets me in the ball park where I need to be. With it .100 - .300 micron my required target is as close to .002 micron as possible. I will have the digi-pas nist calibrated in the near future to see if that helps. My biggest issue is that the app requires precise gps coordinates. That needs to end.

The phone app makes it easy to set the level on the reference surface of the machine then you can get down to the leveling feet and make adjustments. No crank, get up, then go back to the floor and crank again. The results where very repeatable. It agrees well with our Starrett level, it is easier to use and at the end you can report the level before leveling and after.

I'm restoring a 1960's Clausing lathe and really wanted a way to tell level with high accuracy. I saw these and was very interested and finally decided to take the plunge. The Good: It seems to be very accurate and repeatable. I did have to calibrate, but didn't find it any big deal. Just be sure you have a very smooth and close-to-level surface with zero movement. Also, be patient. After any adjustment be sure you wait about ten seconds for the level to stabilize. It is by no means instant. In fact, it's pretty slow. I'm sure they are heavily filtering the sensor results to ensure stability. I found it repeatable to that 0.0002"/ft specification. The Bad: It's not a professional product. The base is aluminum and is cast and no machined in any way. The picture is after I put it on a blued surface plate. I had to actually lay the blue on a bit thick to see the contact points. There are three! The base should be cast iron and should be precision ground. Since I'm working with scraped surfaces, those contact points are going to be up and down and not reliably sitting on the bearing surfaces. And it's short, so any error is magnified. I'll probably look at fine sanding it so the flats are actually flat. I don't know that I would trust the v-groove for much of anything. The Ugly: Charging for the app. You get one "redemption" code when you buy the device. You can't install on another phone without paying for the app. What a money grab. In the next year I'll probably upgrade my phone and will have to spend money on the app. Why? It's a $400 product. The app is useless without the $400 product! Charging for the app may bring in a small amount of money, but at the expense of annoying every single customer. If they want to charge for an enhanced app, no problem, but the app to use the product should be free!

スマホ連動で大変使いやすい。２軸同時に見れて即座に反応してくれるのも良い。普段はA級レベル２個を使用してますが、大型工作機械等のレベル調整にはこれを使ってレベル調整をしています。手元でレベルが確認できるので楽です。

Great level a+++

Using it to level CNC machines, theoretically not as good as a bubble level. But in practice just as good. Use with IPad, tested previously with Android but depends on phone software for reliability and mine was not reliable. Use it for Rough level and moving level, just works

Works perfectly. Only after paying so much you have to pay additional 20 Euro for an App .... it's a little bit ridiculous .....

Lo strumento può essere utilizzato solo con 1 utente. Per installare l'app su più smartphone bisogna acquistare delle licenze a pagamento. Sto valutando di restituirlo. Nella descrizione del prodotto su Amazon non ho trovato questo dettaglio importante.