GIANTARM 3D Printer Filament, Black PLA Filament 0.5kg, 1.75mm Dimension Accuracy +/- 0.03mm, 3D Printing Filament

This Giantarm ASA printed great and didn't have any trouble, but printing using ASA is a challenge for some people. I recommend putting it in the dryer as soon as soon as you open it, also be mindful of the settings like bed temp as this material has a tendency lift off the bed. I had good results using a stock pei bedplate with a light coating of glue. I just like using glue to make sure I get good print results. I tried without glue and got the same results. I made many test prints to get my settings dialed in and this is now one of my go to filament for projects. I was very impressed with my results. I would recommend this filament to anyone, just make sure to follow the steps to get great quality prints.

This product its great. To see the rainbow glow make sure you use a uv light or put out in the sun for a few hours to see full brightness of the colors

I bought this filament to make a custom, dark colored dragon for a client (pics above), hoping that it would give me the dimension and contrast I was looking for in my project, as I had a lighter blue, glow in the dark filament that I needed something significantly darker than it, to really help this project shine... but I knew I did not want a black filament, it needed to be dark blue... Oh my, oh my... this navy blue filament by Giant Arm is yet another offering from the maker that I will be adding to my shelf of regular filaments. Opening the box, I knew that the color was exactly what I wanted and the end product was everything I hope for. Out of the box, this filament was (as always) very neatly wound, had no kinks or brittle portions of it, and it printed as cleanly as any of the best filaments I use. I really like the consistency of the Giant Arm filaments, it allows me to pop the spool into my printer and start printing with little-to-no (usually it's no) changes needed to my existing print profile. I did not experience clogs or moisture related issues when printing, and bed adhesion was a thing of beauty. At no point was I concerned whether or not this filament would stick to my bed; from the very moment the first layer was laid down, I knew my project was going to complete without any failures... something I have come accustomed to with Giant Arm's PLA. Pros: Great color, great bed adhesion, good price point, performs consistently across all their products Cons: There is only 1 set of filament holders on either side of the spool, I would like to either see one additional set on opposite side, or put 1 set every 90 degrees.

.

I really enjoyed this filament while it worked. The color is clean and consistent. The finish was nearly perfect with minimal stringing. However the complete failure in this product, the reason it gets 1 star overall, lies underneath the surface. And I mean the surface of the spool itself. The more you use this spool the more issues arrise. More than halfway through the spool and the stringing has become ridiculous (with a dryer amd sub 10% humidity), but most importantly, worst of all, THE SPOOLING IS COMPLETELY AND LAUGHABLY TERRIBLE. And I don't mean a snag here or there. The further I got into this roll the more it became obvious that somehow the spooling machine had completely failed the consumer. MULTIPLE layers were overlapped causing the print to fail hours into the print once the spool had reached the end of a layer and the next layer was completely embedded. This last tangle was so strong I'm not sure if it's worth the effort to try and unravel the rest of the spool or simply throw it away and get a different brand. The thing that scares me the most is I've now purchased a few different colors from this company and I fear the results will be the same.

Printed really well but the color was not what was advertised. Color in the photos is a dark brown. Actual color is more of a tan, definitely not as dark as I wanted but it works.

nicely wound and great color match for stone. It's hard to find stone color without speckles in the filament. Get this while its avaliable. It was really hard to find this particular color.

awesome color for new products

Imprime de forma limpia y no he tenido problemas de atascos ni durante impresiones largas y el color hueso me ha gustado mucho, es un tono claro y suave, tipo marfil, que queda muy bien en muchas piezas y da un acabado muy bonito además viene bien enrollado que siempre se agradece para evitar líos mientras imprime.

This purple is average to better quality when compared to competitors' Sparkle Purple. It prints ok, It sticks to the bed ok but, It depends very much on your printer set-up as do they all. I paid £25 for this just a few months ago, which at the time seemed a little high compared to £17 for a competitor's version which was just as good. Now it's £31 I just cannot afford to buy it. I can buy a different brand and get 2 x 1kg reels for £37 in this colour. so only 3 Stars because of price.

El filamento es más café con leche que café. Esperaba que el color se asemejara al publicado, pero es más claro.

Estoy encantado y sorprendido con este filamento. Las fotos del rollo no hacen justicia con lo bonitas que quedan las impresiones. Es un filamento de muy buena calidad, muy fácil de imprimir. Con el brillo que tiene incluso disimula pequeños defectos de la impresora. Se imprime bien en un gran rango de temperaturas. La torre de temperatura salio prácticamente perfecta desde 190°C a 220°C. Como se puede ver en las fotos, el acabado es muy bonito.

Yo no le he cogido el punto a las retracciones. El motor del extrusor ha sufrido de lo lindo. El resultado final es muy bueno cuando lo consigues. El punto de flexibilidad era el que buscaba.