CatEye Centre Fork Light Bracket 534-2440 Cycling Lights and Reflectors - Black

I bought this bracket at the same time as the Cateye AMPP 500 for my Brompton. I wanted better visibility when cycling through dark/poorly lit parks and I needed better visibility on the roads to accompany my smaller flashing light which is mounted higher on my handlebars. This bracket does fit the Brompton on the lower brake bracket but it needs a bit of fettling to make it work if you carry a front bag as the light hits the block affecting steering. It's fairly simple, just disassemble the plastic light clip from the metal bracket and turn it through 180deg and mount it the opposite way round to how it's supplied. This will allow you to feed the bracket under the brake callipers so the light is mounted lower and no longer hits the block or the bag. g. (You may need to fit the plastic light bracket after you've fitted the metal part to the bike to make it easier to feed under the brake calliper) If you don't use a front bag and carrier block then I imagine this won't be an issue, so just mount it above the calliper as normal. I hope this review helps anyone with a Brompton. 👍🏻

Functions exactly as expected. Enables me to ride with bar bag and still have unobstructed light for visibility.

A bit "clunky" but it holds a Cateye front light secure and pointed in the direction you need. It also saves on handlebar space, which is at a premium. as it fits on the fork crown or fork brace. Seems well made and is easy to fit... just check before you buy that the chosen location has a threaded hole (fit a bolt to check as some forks have odd threads that are difficult to match) or a through hole to fit an appropriate bolt into. I've fitted this to a suspension fork that has a threaded hole on the brace on my wifes KTM, then looked at my KTM and it had no corresponding hole, so I need a different solution! I didn't check before I bought it and the thread was odd but I managed to cut a thread that worked.

I bought this bracket to mount a cat eye AMPP500 on the front of my wife’s bike. I needed this bracket because if the light is mounted on the handlebars the fitted basket casts a big shadow in front of the bike. The bracket turned out to be the perfect solution. It’s very sturdy and can be fitted onto the central mud guard mount (with a slightly longer bolt). It gives just enough clearance for the v brake to work without any contact with the bracket.

Does the job required of it, but it really would be much more useful if it actually came with the fixings to fit it to the bike. Pros: Very sturdy Frees up space on the bars Works with “V” style calliper brakes Fits quite neatly under a bar bag Good value for money Cons: Doesn’t come with fixings Lights up the front tyre as much as the road

Good but basic. Does not include mounting bolts, so be aware that you'll need hardware to fit this. Fairly hard to tighten. The mount itself is plastic and fits Cateye lamps properly (Ampp 400).

Worked perfectly on my Brompton. Just flip it upside down and switch the attachment around.

The threading screw is missing. They should also have a screw for this money

元々ライトはハンドルにつけていたが、折り畳み自転車であるため毎回つけ外しする必要があり億劫に感じていた。 そんな折にこの製品を見つけて購入，さっそく近くの自転車屋さんに持って行きつけてもらった（施工費は500円くらい） 足元を照らすため対向車に眩しい思いをさせないで済むのがとても良いメリットだと思う もちろんハンドル周りがスッキリしたというのも良いと思った！ 折り畳み自転車では尚のこと付けてよかった！

It is perfect!

Lo he instalado en una brompton tras cambiar la posición del soporte y ubicándolo entre las tenazas/cangrejo de los frenos y el guardabarros... miren las fotos..

Ho acquistato questo prodotto per fissare la luce Cateye alla forcella di modo da aver più spazio sul manubrio della mia gravel e sono super soddisfatto dell'acquisto! L'acciaio sembra di ottima fattura e la luce è super stabile, anche nei tratti molto sconnessi con ciottoli; il che, per chi usa la bici tutti i giorni anche per andare in ufficio, è un plus molto importante. Il supporto attualmente viene fornito con vite di fissaggio e rondella in ferro da posizionare tra il supporto stesso e la vite. Sinceramente, io ho aggiunto anche una rondella in plastica onde di evitare di rovinare la vernice laddove il supporto sarebbe andato a serrare sulla forcella. Nel complesso comunque un ottimo prodotto, consiglio

Bon rapport qualité prix