Lepro Warm White LED Strip Lights 5M (No Plug, Striplight Only), 300 LEDs, 2300lm, 3000K, Stick on LED Lights for Bedroom, Under Cabinet and Cupboard (DC 12V Power Supply Required)

It was not easy to choose from the myriad LED stripes on the internet, but this one proved to be a really great one. I ordered 5m in October and now 2x5m in January. I use them as display lights on IKEA shelves, the remote is not in use, but worked when I tried at the beginning. The brightness level is just fine for not giving too sharp contrast to the products or unnecessary shine and flickering. I cut it and soldered where I needed a brake in the stripe. The overall quality of the product, the packaging and the manual suggest that the manufacturer has a good eye for the details. Highly recommended.

Consistent colour temperature when connecting multiple units together (I have continuous line of up to 15m, with correct power supply at multiple points to minimize voltage dropping along the length). Very soft and flexible strip. This could be advantage or disadvantage depending on intended use. In my case it was advantage as allow fitment around corners and tight spots without damaging strip. They are not the brightest on a market and if more light density or continuous light (COB) is required different strips should be used, but they will be at a higher cost. Brightness level was adequate for my application.

Purchased at a reasonable price. This item has great potential but unless you intend to use an entire strip in one application the additional items required to power cut up strips can rapidly add to the cost. Nice and bright warm white light, easy to hide and sticks to most surfaces. I wouldn't recommend using this in places where moisture can accumulate as the components are not sealed and will quickly corrode. With that taken into account you can't really fault it.

I have bought several reels of these strips for various purposes. The pictures show a strip of these in an 80s sideboard, in these pictures they are running at 20% brightness using a driver matched to the number of LEDs installed in this particular unit (to dim them, the driver must match within around 30%). They stick well to varnished surfaces like these but not so well to raw surfaces like wood or cardboard. The third picture shows a group of 3 (they can be cut off in groups of 3) inside a children's construction project and as can be seen, they have come unstuck. The final two pictures show these lights installed in an inset model of the Grand Canyon within a little side table. The batteries for this number of bulbs have lasted 2 years with intermittent use.

Easy to use and gives a lovely light above our kitchen units. Simply cut to length at the marked positions, about every 50mm and stick where you want them.

I recently purchased an LED strip for my home, and I'm thoroughly impressed with its performance. The brightness and color options are outstanding, allowing me to set the perfect mood and ambiance in any room. The adhesive on the back makes installation a breeze, and the remote control provides convenient operation. Additionally, the energy efficiency of LED technology means I can enjoy the stunning lighting effects without worrying about a spike in my electricity bill. This LED strip has truly transformed the atmosphere in my home, and I couldn't be happier with the purchase.

I bought 5m of these LEDs in Nov 2018, so I could install some under-cabinet lighting in the galley on our boat. I wired them directly into a new 12v circuit, and many people told me that they wouldn't last. The reason they gave me was that most 12v systems, fluctuate in terms of voltage. So when the engine is running, the alternator is charging the batteries, which pushes the voltage up as high as 14v, and they told me this would burn out the LEDS. Well I can say with some confidence, that this is utter rubbish. With 6 years of living on a boat, using these lights every single day, charging the batteries and therefore, pushing the voltage up to well over 14v at times, these LEDs are still perfect. I would highly recommend them.

terrible i’ve brought 2 of these on the past 4 months and they have both broke i got these on the 24th of january are they have broke already

Een goede service

Lyser som den ska

These are great especially considering the price! For a sub $10 product, the first time I ordered these in 2016 I was worried about the quality and how long they would last. I’ve now used them in two different houses I’ve lived in and they have been great, the only issues I’ve had with them have been related to the driver I was using which turned out to be faulty, and a faulty solder joint that was my own fault. I installed these the first time in a house as under cabinet lights in the kitchen. They lasted for two years until we moved out and I’m sure they would have continued to last if we had continued living there. (And I had them on almost 24/7) I have now installed them in another house, again as under cabinet lights and they have been great. My favorite thing about these is the brightness and color temperature. I don’t like a lot of under cabinet lights / led white lights because in my opinion they tend to be too cool (I absolutely HATE daylight white lights, they make everything look like a hospital room and I don’t understand why people like them...) these lights are a nice, soft, warm white, they look great and provide fantastic visibility for cooking, and create a nice evening ambiance at home. I recommend also buying a remote control adapter device to install with these lights as this will give you the ability to adjust the brightness of the lights and then them on/off without unplugging them. Shown in the photo, they are dimmed, they do get much brighter if you want them to. If you’re looking for quality light strips, no need to buy a more expensive brand, these get the job done, look nice, and for under $10 what more could you want?

Sehr schönes Angenehmes Licht. Klebestreifen hält auch sehr gut und schon recht lange

I installed these recently in my kitchen. They powered by a 15A/120V lighting circuit wired to a switch. I also purchased a 2A 24W LED driver/transformer from Amazon which is mounted under my upper cabinets as well. Very straight forward installation, they don’t get very hot, and the 3M tape on the back is enough to hold the strip on. I purchased the clasp style connectors from Amazon as well. The connectors work pretty good but soldering would be better.