B1F98185

Worked fantastic! Teeth and head could be a little longer for slightly better depth in the knuckle, but for the price this was insanely easy and efficient to use. Necessarily for this job, absolutely necessary.

The tool worked as advertised for the strut pinch bolt but was too wide for the ball joint pinch bolt on a 2016 Nissan Rogue. Tool is good but do not over torque with an impact wrench.

This tool was amazing. I had a pressed on shock component that I needed to remove and this tool lifted and popped the pressed on component free.

Works great but the inner springs started coming out after the first use so be very careful. I had the misfortune of ordering an alternative strut spreader along with this tool and this strut spreader made my job easier. Some will tell you to just use a pry bar to get the parts off the strut but this works great and I didn’t even have to hammer the part off the strut. My recommendation is to be very careful when using this tool because as I was holding it in place with an adjustable wrench the inner springs starting coming out and cut my hand when I grabbed it to pull off the bottom part off the strut. I had to use a hand clamp to guide the springs back into place and the injury I sustained was not severe enough to need stitches but I advise everyone to be careful when using this tool because some of them can have defects.

Very helpful tool

Very good tool got the job done on bmw 530xi

I bought another version of this tool. This one works but has a tendency to slip out of the gap with vibration due to not having enough surface area engaged.

Tool works well to keep the knuckle spread to remove the strut. works better than using a chisel like I used to do.

Works well so far. The only thing I wonder about is it doesn’t have any name on the tool so how do I know what brand it’s. The reason I bought it because it has a name, usually it has better quality. I will update when it fails

Semble solide reste à voir avec le temps.

Great tool for helping to remove the knuckle assembly from the strut. Little learning curve to getting it to work correctly, but once you get the hang of it, works great.

The tool does the job, Though i feel it would be better with a wider tongue, It likes to slip out while tightening due to its small size. Requires using a wrench and socket simultaneously, Its important to hold the wrench on the tool very still so it doesn't slip out. I used it on my 07 BMW 530xi front coilovers.

Does not open far enough I would say it’s useless Great idea But needs to open/spread further For that reason useless