1U Fixed Server Rack Mount Shelf - 10in Deep Steel Universal Cantilever Tray for 19" AV/ Network Equipment Rack - Heavy Duty Steel - Weight Capacity 44lbs/20kg, Black (CABSHELF1U10)

Very sturdy and rigid. Great rack shelves! Packed well and look great.

I was worried that this might not fit my rack after reading the review that said it's odd sized. However, since receiving it, I've checked it in literally a dozen different racks, and I can say with certainty that it absolutely DOES fit. The cases / racks I've tried it in are built by: Middle Atlantic (steel and wood, stationary and mobile), Gator, Road Ready (shock mount and non shock), SKB, Raxxess (steel wall mount and steel roll-around), Paradise, Anvil (shock mount and non shock), and Calzone. It fit every rack tested, exactly as would be expected. So, as for the review that said it doesn't fit a standard rack, either the rack in question is a homemade or some other oddball unit/size, the rails in the rack in question are improperly mounted, or the shelf itself has been bent out of shape. It certainly IS NOT the fault of the shelf that it won't fit. If anything, my opinion is that this shelf is a bit overbuilt! For as small as it is, this thing is heavy! It's made of much heaver than usual steel. This shelf is far heaver than my Middle Atlantic shelves. If you need a shallow rack shelf, BUY THIS ONE! It's beefy as can be, and very well constructed.

Almost sent it back due to the depth and my miscalculation of how much depth I'd have to work with, but then looked at my layout diagram and realized I had accommodated it, just 1U lower - lol. Mounts right up, screws, washers and cage nuts included. Seems more solid than my rack rails. I don;t have anything "heavy" sitting on it, just non-rack-mountable Ubiquiti items; 3p router, 8p POE switch, 1st gen cloudkey, but it's solid enough I could probably put 50lbs on it and it'd not blink...my rails however probably would warp a bit.

Purchased two of these to use on a client install. Intended use was to hold audio/video equipment that couldn't be rack-mounted (i.e. stereo receivers/amplifiers, dvd recorders, TV/Monitors, etc). Holes match up perfectly with the rack, and there was no problem supporting the weight of multiple pieces of equipment on each shelf. The depth of the shelves is perfect. Placing a stereo receiver on one shelf, I was able to line up the front of the receiver with the front of the shelf/rack rails, and the back of the shelf extended several inches past the back of the receiver. No worries about anything falling off. These are a good buy, and I'll be buying more of them as I develop needs for them!

Sturdy rack shelf for light use. I sprayed plastic-dip on it and mounted it upside down pointing out. Made a very nice mouse platform. The power strip looks nice and had rack screws & nuts too. Long power cord. The ears were where I needed them, but it looks like they can be moved to the back.

This is a great shelf. No issues.

Great shelf, easy to install, came with hardware. Supports more weight than I anticipated. I used it to briefly support a Cisco switch while I moved the cage nuts to a new location. I'm using it as a keyboard tray that's recessed into the cabinet.

This is a solid steel shelf, that includes all the hardware, a plus for sure. Value wise, its a little on the pricey side for a shelf, but it is solid steel construction with no wobble.

Pour commencer et ne pas fausser l'évaluation, j'ai retiré 1 étoile pour le tarif un peu cher, même si cette étagère d'une Unité est d'excellente facture, livrée avec un sachet de 4 cages-écrous et leurs vis. Et pour ne pas avoir prévu quelques petits orifices qui auraient permis de fixer le ou les appareils dessus avec des serflex plutôt que du double face. En tout cas, pour les musiciens ou techniciens qui cherchent à étoffer leur rack en y ajoutant cette étagère, pas de souci. Dans le sens de rackage face, elle comporte une butée derrière avec la façade ouverte et inversement si vous rackez l'étagère en la fixant au dos de votre meuble rack. Je prévois de remplacer un patchbay 1U par cette étagère (voir photo), pour y fixer avec du double face une petite remote midi, ainsi qu'une pédale de contrôle d'effets pour déclenchement du tap delay. C'est parfait en fixation avec le haut dégagé, car cette étagère n'est évidemment pas sur glissière. On peut y fixer des appareils plus profonds que la taille indiquée en y ajoutant des cales, afin de ne pas buter sur la lèvre arrière, ainsi dans la configuration que je décris, avec quelques petites cales, on peut y fixer un notebook, pratique pour commander certains éléments du rack avec l'interface ad'hoc.

Genial. Bonito y resistente.

Qualité parfaite. Très beau et bon produit. Je suis très content de cet achat ainsi que le wall network rack que j'ai acheté de cette même compagnie. J'ai acheté 2 tablettes et les 2 étaient en parfait état.

正直、鉄板でこの値段か？と思いましたが、剛性はありしっかりしています。

Excelente construcción y materiales, durable y desde el empaque todo luce de primera, el unico pero sería el precio que es un poco elevado, de ahi en fuera todo muy bien.