HX Premium Heavy Duty Monitor Arm, Single Monitor VESA Desk Mount – for Flat or Slight Curved Ultrawide Monitors Up to 49 inches, 20 to 42 lbs – Standard Pivot, White

I absolutely absolutely FREAKING LOVE THIS ARM. I bought it as soon as I found out we'd be working from home for a while, in an effort to finally upgrade my home setup. After I bought it I mentioned it to a friend, and she said "YES!!! I HAVE THE SAME ONE AND I LOVE IT!!" I've only had it for a couple of months, but my friend has had hers for years and it's still going strong. I have an enormous Cintiq - 24HD Touch. I was warned that if the weight of the screen to be supported is too close to the weight limit, it probably won't work well, and this was literally the only arm I could find that was rated to support my monster! Not only does it hold the weight of my Cintiq beautifully, the motion is smooth and effortless, only a very slight wobble, and I can lean on it pretty hard without it going down. It's a little tricky sometimes to get the wrench-key into the right spot for adjusting the tension, and every person will prefer something a little different - but once you get the hang of it it's a no brainer. Installation itself was easy and instructions were clear. The only difficulty was lifting my Cintiq onto the arm once it's all assembled, because the dumb thing is so darn heavy it would have been nice to have a second pair of hands... but that's not the arm's fault! Ergotron is the standard in the entertainment/arts industry for a reason. I'm an artist, so aesthetics matter, and it has to function all day long every day. I COULD NOT be more pleased. I'm an extremely tactile and picky person I got the polished aluminum one and I have to say, it's actually beautiful. It doesn't have that "ergonomic tech" look that a lot of other "ergo" products have, which I think is pretty tacky and wanna-be futuristic. This thing though... this is a beautiful and sturdy piece of engineering and it performs it's function to perfection. THANK YOU ERGOTRON. My desk is 30" deep and it reaches well beyond the edge from the back, but I have it mounted to one side and it works just fine there too. This is such a massive improvement over the piece of crap stand that the last few models of Cintiqs have come with (the one that only has two positions to choose from, is difficult to adjust, and weighs a freaking ton), it's just night and day. It's rare that I am so dang chuffed over a purchase that I feel COMPELLED to review it, but this one dear god was completely worth it. Improved my workspace 1000% times over and I'm pleased every time I see it and grateful every time I use it! What a spectacular piece of equipment!!!!

This monitor arm is extremely well made, durable and a lot more heavy then I thought it would be. So, overall the construction of the arm and it's design is very well made, heavy solid materials. It comes shipped in a great packaging, it's nice to see care in how much care went into packing. The assembly is relatively easy with just 3 parts that connect with a few screws to tighten. I'm using this arm with an LG 38" Ultra Wide monitor that I believe is about 15lbs in weight and it can easily move around without struggle on the arm. If you have a lighter monitor or a smaller sized one, you may have difficulty with the arm keeping a monitor in a low position. If the monitor is light weight < 12-13lbs it may want to lift up on it's own due to the heavy spring action. I had a smaller monitor on it while waiting for my ultra-wide and it was kind of comical. I added weight to the monitor to keep it down a bit. It supports VESA 100x100 and 200x200 on the mounting bracket. I feel like this is a good standard for newer monitors. The mount is sturdy and supports a really good range of movement tilting up and down as well as a full rotation on it's side. The arm movement is really reasonable in it's range of movement. I'm even able to drop my monitor down a bit lower than the clamp. The arm assembly also includes options to mount the arm with a desk clamp, or through a drilled hole. It has good options for mounting the arm as needed. I'm really satisfied with this purchase and can see this arm lasting a really long time - probably much longer than my new monitor. I highly recommend getting it.

I struggled to find an arm that would support my almost 33lb 4k 43" LG monitor. Sadly it is the most expensive but is among 2 that I found would work and the tolerances are DEFINITELY better for the Ergotron. Here is what I like: 1: Stable - was concerned due to the drop in nature of Ergotron HX, but the monitor does not move after mounted 2: Assembly - almost too easy; 32 lb monitor mounted solo VERY easily 3: Ease of use - very very smooth 4: Aesthetics - good looking; aluminum look only comes in white but matches the black items in the room I have well 5: Quality - clearly built to last 6: Warranty 7: Company is known and has a US presence Here is what I don't like: 1: Price - it is expensive The cost is worth it in my opinion as the company has a US presence and a good warranty - also it is the only mount where my weight is in the middle of the road. My setup: ----- ------------ ----- | | | | | | |2K | | 4K | | 2K| | | | | | | ----- ------------ ----- Each of the 2k 27" monitors use the Ergotron LX. The 43" 4k monitor uses the Ergotron HX.

Why did you choose this product over others?: I have heard about the ergotron brand before and always seen good reviews of it despite of its cost. Functionality: To my surprise this is loaded with all the features, move up and down, tilt sideways tild upwards and downwards, move forward and backwards, just all around pretty much a 360 movement, well 180 for the base and almost 360 for the monitor. Mobility: Takes a bit getting used to with the movement, if you make it more stiff to move, expect it to be hard to do small adjustments but it will stay in place and will not wobble, or you can loosen it and it might wobble a bit more but will be super easy to move about. Cable management: On the back there is 2 ties for cables that run along the arm and a plastic shroud that hides the cables going down behind the table. Easy to use and access. Desk space: I used to have my monitor up on a small elevated riser, and got tired of all the wobble from it, and while that took up a lot of space, this one saves quite a lot, to the point that I dont even know what to do with the empty space :D Totally loving it, it holds an LG C2 42" just fine, but it DID require a vesa mount adapter 300x200, as the included one only goes up to 200x200. so much cleaner on the desk and I can move the monitor closer any time I want to or further away if I dont want it to be up close. Assembly is also very simple, I did not drill a hole into my desk so I used the end clamp and it clamps on very strongly, the base is heavy but i have a table that is roughly 3cm in height and is made of solid wood so no issues with that. The first part slides into place easily and the second also, clipping on the monitor was a breeze even alone so you dont necessarily need 2 people to do it, clip attached, screw in from the bottom and it wont go anywhere! as stable as it can be.

Zeer blij mee. Als je hem uit de doos haal voel je gelijk dat het geen rommel is. Echt kwaliteit spul. Makkelijk te installeren maar neem er wel ff de tijd voor.

The Ergotron HX holds my 57" Odyssey g9 just fine, except for monitor tilting. Raising the monitor and swinging it around is easy as pie once all the tensions are dialed in and monitor happily stays wherever I put it with no sagging over time. The only issue is the up and down pivot, no monitor arm currently exists that can deal with this massive monitor's weird centre of gravity. Knowing nothing can handle the tilt, I didn't pick up the optional Heavy Duty mount and instead jammed a couple of screws in the tilt mechanism to lock it in place. It's crude, but it works!

Ottimo braccio, solido, solido. Funziona bene.

Trochę drogie ale polecam. Bardzo fajny uchwyt. Podwiesiłem telewizor 42” i super to wygląda. Duży plus za szeroki zakres regulacji.