Bigeyes H1 3D Video Display Glasses,HDMI Input,Personal Movies Cinema, Video Goggles, Headset, Head-Mounted Display,Monitor,Priviate 3D IMAX Movie Cinema(Bigeyes H1)

I create 3D images and greatly need this viewer. It fulfills my needs completely. I wish we could do away with all the cables, but I'm not complaining. It is also awesome for side-by-side video viewing.

Prefacing: I've been using 'video glasses' for almost a decade [mostly through the development / use with rc-aircraft] *That said - I'm Very Familiar with the ins and outs of this stuff.. I wanted a Simple set of Basic video glasses just to watch movies. Nothing crazy, so I expected Quick setup and a Quality view.. Instead [connected and tested to 3 high end gaming laptops] The unit would power on just fine.. The very second the HDMI cables where connected, Nothing. Black screen, And.. immediate 'disconnection tones' as you'd hear when a USB device disconnects from the computer.. No amount of trouble shooting would get them to show video. [I also connected a headphone jack - just in case] Nada. The company had no advanced trouble shooting info.. Amazon support had no way to do 'support', or offer any additional info.. I was initially going to Exchange, but, was instead told to opt for Refund. I could have gotten a dud.. It happens - Especially with electronics.. On the other hand, they could just be junk. It's hard to tell without having a few side to side to test against each other. IF people actually receive a working pair, Hopefully they work, and work well enough to actually enjoy. The concept is definitely there.. Construction wise - Eh', they're built to a price point, but still seemed solid. NOT the quality of a higher end set of "FPV Goggles", but, good enough for their intended use. I should probably say - Do Not Drop Them. *Shrug*

Positives: A very good price for what it does. It's lightweight and comfortable. Good quality and simple to setup. Negatives: It's not wireless and the wires are short. No battery option support. Overall: Excellent product at an affordable cost.

Crisp Image, but not worth 150$. cheap materials, but its not gonna break by holding it

This arrived today right before I left for work so I spent my entire shift looking forward to trying them out and I really like them. I wasn't expecting this to replace my 4k TV (and it doesn't) but for the price, these are pretty good. The picture quality is decent except for the blurry spots around the sides (which might just require a few more adjustments to the eyepieces or some changes to the settings) and a black "scratch" towards the bottom of the right screen which isn't that noticeable/distracting when I'm actually watching something. These are a little uncomfortable at first but after a few minutes I adjusted to wearing it. I'm using these with my JVC Exofield receiver/headphones so I can't comment on the sound quality of the built-in 3.5mm jack or included earbuds. I will say that the combination of a "virtual theater" with virtual Atmos surround sound is really good for when I just need to take a break from reality for a bit. The screen takes up my entire field of view; I'm not sure what the equivalent screen size would be but it's big. Now for my complaints: The hdmi and USB cords are wired into the headset and they're pretty short so I had to buy a female-to-female HDMI adapter and a longer HDMI cord. The USB is plugged into my Anker powerbank which I can just put into my pocket, so the USB cord size isn't much of an issue for me but it might be something for other people to keep in mind. The eye lens shield is separate and there's no way to attach it to the headset, you have to align it with the screens and hold it in place while putting the headset on. It's not a huge deal but it does make getting ready a little bit annoying, especially if you have to keep taking the headset off to go to the bathroom or get a drink. If an upgraded version is released with HDMI and USB inputs (instead of built-in cords) and either a built-in eye shield or a way to keep the eye shield attached to the headset, I would definitely buy it. A built-in rechargeable battery would also be nice but I don't really mind having to keep it plugged in to a power source since I'm not walking around while wearing it. I do wish the picture resolution was higher than 720p but considering that this is relatively cheap, I wasn't expecting high-end technology. And like I mentioned before, there is a black mark on the right screen. All in all, I do like this for what I use it for. I barely feel it once I adjust to wearing it and the screens do replicate the "movie theater screen" effect.

Goggles work but I think the screen is too close to the eyes

From Cold start the screen blanks 2 times or more over the next 5 min or so then whenever it wants to. The power is on with some light in the background but the image on both sides goes black. Switching modes may restore picture. I wanted to use the goggles with my Runcam WiFi Link 2 but I am afraid they will blank during flight which would crash the plane, what can be done? Focus is poor on the left side of the Left eye and the nose cut out is not quite centered with my nose making it not quite large enough. What can be done? I am a little far sighted according to my DJI Goggles 3 by 0.5. Wearing glasses underneath doesn't seem to help, what can be done? Most of my 3D movies are SBS but having a top to bottom mode also would be better. A way to evaporate condensate would help. Sound is a little low but useable. Brightness range is good. I bought these goggles because DJI Goggles 3 did NOT have a HDMI input! UPDATE!!! I was feeding the googles with a 6ft thin HDMI cable. I switched cables to a thick cable to fix the blanking problem. Probably as weak transceiver on the edid circuit. Found a New Problem. The display's on the SBS 3D mode are reversed on the goggles I have, 13.6.6 is the number on the right 2 buttons (see image). This produces only 1/2 the 3D effect! The website manual for the model goggles I have says there is a Top to Bottom mode which is NOT on the goggles I have (probably old stock). 3D SBS Reversed Solution! Playing a standard sbs movie or file with SMPlayer using the 3d Crosseye mode fixes 3D playback. (ie. Titles will be rendered over the background like normal)

Muy buena calidad de imagen, se conecta muy fácil. la uso en el trabajo con mis pacientes para que puedan ver sus película o serie favorita, mientras es atendido y calmar su ansiedad. Excelente producto!!! Muy recomendado