We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.
Descargar la aplicación
Servicios al cliente
Sobre nosotros
Copyright © 2025 Desertcart Holdings Limited
Descargar la aplicación
💧 Stay in control, effortlessly—your water level’s new best friend.
The GOVALVE Stainless Steel Float Ball Valve features a 3/4” NPT male threaded connection designed for low-pressure gravity water systems. Constructed from durable 304 stainless steel, it withstands temperatures up to 248°F and pressures between 4 and 116 PSI. Its automatic float sensor valve design requires no external power, providing reliable, maintenance-free water level control for tanks, ponds, and water towers.
| ASIN | B09G98RDBH |
| Best Sellers Rank | #67,651 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #97 in Float Valves |
| Brand Name | GOVALVE |
| Connector Type | Threaded |
| Customer Reviews | 4.2 4.2 out of 5 stars (145) |
| Exterior Finish | Stainless Steel |
| Inlet Connection Size | 0.75 Inches |
| Inlet Connection Type | National Pipe Tapered |
| Manufacturer | GOVALVE |
| Material Type | Stainless Steel |
| Maximum Pressure | 116 Pound per Square Inch |
| Model Number | GOVALVE-304SS-FBV |
| Number of Ports | 1 |
| Outlet Connection Size | 0.75 Inches |
| Outlet Connection Type | G Connector |
| Size | 3/4" NPT |
| Thread Size | 3/4 inches |
| Thread Type | NPT |
| Unit Count | 1.0 Count |
| Valve Type | Ball Valve |
B**T
Good quality
Great shutoff, 5+ gallons per minute.
M**E
Good quality
Seems like it should work great as a float valve for our maple syrup tank. Haven't installed it yet.
P**.
Not long enough to get a fitting on once it’s installed
The construction seems very sturdy. The only issue is that the threaded area doesn’t have enough remaining to put a plumbing fitting onto. It probably isn’t bad if the wall of the container is about an eighth of an inch thick.
J**J
Efficient product and order process
Works like a charm
R**R
Installation is easy
Easy install and appears to be good quality. All stainless steel. But it does have a down side. No adjustment on the float. After installation the unit leaks out from the front. I will not shut off. Had to replace it with one from my local hardware store. Will be returning as I don't have time to wait for a replacement.
S**S
Does not shut off when the float rises
This float valve does not work. It barely rises when water pressure increases inside a tank. At the maximum water level, the float rises but does not shut off water coming in. This causes water to overflow. It is a waste of time and money. Do not buy these valves for water conservation.
P**D
Es de acero inoxidable una pieza solida
J**S
Good buy
Worked great .
I**E
Excelente material y cierre de válvula. Veremos con el tiempo.
H**R
Super product
M**3
Simple system and works great Holding 70 psi from overfilling four hundred gallon tank.
J**Z
Justo lo que esperaba, excelente equipamiento para manejo de agua caliente
A**P
Don't get this for critical shut off applications. I had two issues: there is so much water that shoots out past the end that it was hitting the float and causing rapid oscillations that took a long time to stop after it would start. There is no adjustment to angle the float down, so I had to bend the rod a bit to try to get the float out of the jet of water. Once that was settled, I noticed on my cistern water level monitor that it had filled a few times to 108%, and once to 114%. Did some additional tests, and this wasn't shutting off all the time even though the pivot and plunger were clean. The nylon round end on the plunger that provides the seal isn't as reliable as a brass valve with a rubber seal. Have now replaced this with a proper plumbing part. Not sure how I avoided a blowout of my cistern lid. I think I just got lucky and my well pump timer shut off before it blew the top off of my cistern and flooded the shed. Hopefully this review saves someone out there a nasty water overflow issue.
Trustpilot
Hace 1 semana
Hace 2 semanas