ADE Advanced Optics Tactical Red Dot Mounting Plate – Adapter Mount Base forSW MP Shield SD9 SD SD40 MP SD40VE/zigana px9 – Compatible with Doctor/Vortex Venom/Burris Fastfire, ADE RD3-006A/B,009,012

The reason I was seeking a red dot mounting solution was because for some odd reason my pistol came from the factory shooting low. About 4 inches low at 7 yard to be exact. First, I told out operator error by taking myself out of the equation and strapping it to a rest. Them I got new sights. I even tried to "mic" down the spare front sight. I was able to bring the shots up by 2 inches at 7 yards. However, there wasn't that much metal left on the front sight to file down. I guess I could have purchased take rear sights too. But I've always wanted red dot equipped pistol. I've have red dot sights on my AR and shotgun and love them. I contemplated getting the slide milled out, but my pistol cost less than $400 new. Getting the slide milled out was not justifiable. Milling out the slide is also red dot unit/brand specific and I wanted to have the option of swapping out different units. A dovetail mount was the best solution. This product fits in the S&W SD9VE perfectly. The included screws were a little short, but I contacted the seller with the measurements of the screws that I needed. They promptly sent the appropriate length screws expeditiously. I was able to mount the vortex venom 3 moa sight without a hitch. Fitments for the venom was also perfection. It has held zero through 300 rounds. The pistol is now much easier to shoot accurately​ and rapidly. Problem solved.

This is the best of the dove tale mounts for your RMR. I have it mounted on my M&P 2.0 full size, compact, and subcompact 9mm. I also have it on my M&P. 40cal. It fits firm and does not loose zero. Perfect for not milling your gun. The ones on the Glocks and Sig Sauer are suspect.

Interesting design. The F2 piece slides into the dovetail after removing the rear sight but isn't a very tight fit. The F1 base sits on top and the additon of the optic screwed into the F2 piece allows for a firm hold of the base to the slide. I've fired 30 rounds of .40 S&W through my gun and it's worked well. I topped it with the ADE MRDS from Amazon as well. One caveat as seen in other reviews: When the base first showed up it was shipped with screws that were too short to mate the optic to the base. I contacted the company who gave the me screw size and said it shouldn't be hard to find replacements. 4 stores later and nothing fit (I started to wonder if the size they gave me was incorrect and not actually metric). I finally received new screws from the seller a month and many emails later. Make sure you get one with the updated screw kit to avoid any hassles.

Does not fit the mp 2.0 with the vortex red dot. (Corrections it will hold on but after 5 shots it flew off and now i am stuck with a messed up red dot)Screws are cheap and will stripe easily. Defeats the purpose of buying a new mount when the vortex came with a plastic one that worked even better.

Ordered wrong item, so gave it to a friend, with the correct pistol. Fit & finish were perfect.. So I ordered one for 1911, and did some fitting (file) to the piece that fits into the rear sight notch of the slide, for my old (1986) Belgium BRNG HI-Power, & it worked as well.

This is a decent optic plate, but I removed a couple of stars because it is not designed correctly for the type of pistol that it says it fits. First, the piece that goes into the dovetail slot on the slide fits very loosely and relies totally on the pressure of the screws to hold it in place. I would rather see at least a slight pressure fit. Second, the portion of the slide behind the dovetail slot on M&P pistols is lower in height than the area in front of the dovetail, maybe by around 2mm. This plate does not account for this and therefore slants down at the rear when installed. I used up all of the elevation adjustment on my Vortex Viper but was still not sighted in due to the slant of the optic. To fix this, I got two small nylon washers and glued them together, and then placed them between the plate and slide at the rear. This perfectly leveled the optic and I was then able to get it sighted within the elevation adjustment range of the Viper. Just be aware of this before ordering. The price is good on this plate, but it’s not perfect and you very well may have to do some custom fitting.

It’s a very simple and cheap option for those looking to mount a red dot to their handgun. It doesn’t allow a ton of versatility if you aren’t also buying an ADE red dot, but if you’re buying this mount then the other part is kind of a given.

Fit good, nice build quality